mirror of
https://github.com/MiyooCFW/buildroot.git
synced 2025-09-27 22:24:19 +03:00
BOARD/PKG: better LOGS in on OS scripts & add umtpr-debug (#169)
* firsboot/main - better LOGs - refactor a bit gmenu2x loop - add good logs for umtpr * BOARD: options.cfg: add DEBUG options - use separate options for gmenu2x & umtpr debug - for default setup NO DEBUG * PACKAGE: umtprd: add debug build
This commit is contained in:
Apaczer
@@ -2,26 +2,38 @@
|
||||
export TERM=linux
|
||||
|
||||
# expect to be run from /boot, where the boot partition is mounted (readonly)
|
||||
export LOG=$(mktemp)
|
||||
#LOG=/dev/null
|
||||
LOG=${HOME}/log_firstboot.txt
|
||||
LOG_TEMP=$(mktemp)
|
||||
export LOG
|
||||
export LOG_TEMP
|
||||
|
||||
restore_temp_log_func(){
|
||||
cat ${LOG_TEMP} >> ${LOG}
|
||||
sleep 2
|
||||
LOG_TEMP=$(mktemp)
|
||||
}
|
||||
|
||||
restore_dmesg_log_func(){
|
||||
echo -en "\nNew DMESG log:\n" >> ${HOME}/dmesg.txt
|
||||
sleep 2
|
||||
dmesg >> ${HOME}/dmesg.txt
|
||||
}
|
||||
|
||||
# high brightness
|
||||
echo '10' > /sys/devices/platform/backlight/backlight/backlight/brightness
|
||||
|
||||
#echo -e "\e[?3c"
|
||||
echo -e "\e[32m" # green
|
||||
#echo -e "\e[32m" # green
|
||||
|
||||
echo "firstboot script running..." | tee -a ${LOG}
|
||||
echo
|
||||
echo -en "\e[32mfirstboot script running...\e[0m" | tee -a ${LOG}
|
||||
|
||||
# run a custom script if present - could be used to fix u-boot and such
|
||||
if test -r "${BOOTDIR}/firstboot.custom.sh"; then
|
||||
echo "Running a specific firstboot script..." | tee -a ${LOG}
|
||||
(cd "${BOOTDIR}" && sh firstboot.custom.sh) | tee -a ${LOG}
|
||||
(cd "${BOOTDIR}" && sh firstboot.custom.sh) 2>&1 | tee -a ${LOG}
|
||||
echo "Finished running a specific firstboot script." | tee -a ${LOG}
|
||||
fi
|
||||
|
||||
|
||||
echo " "
|
||||
sleep 1
|
||||
|
||||
@@ -41,7 +53,7 @@ consequences arising from the use or misuse of this software.
|
||||
TEMP=$(mktemp)
|
||||
|
||||
## Access /boot directory
|
||||
mount -o remount,rw "${BOOTDIR}" | tee -a ${LOG}
|
||||
mount -o remount,rw "${BOOTDIR}" 2>&1 | tee -a ${LOG}
|
||||
|
||||
# list of available devices in u-boot Environment parameters' read from FORCE_VERSION
|
||||
devices_ID="
|
||||
@@ -122,13 +134,13 @@ detect_console_func(){
|
||||
# write logs, sync & unmount MAIN before reboot/poweroff
|
||||
safe_shutdown_func(){
|
||||
echo "please wait a few seconds for a ${SHUTDOWN}...." | tee -a ${LOG}
|
||||
dmesg > ${HOME}/dmesg.txt
|
||||
mv ${LOG} ${HOME}/log_firstboot.txt
|
||||
restore_dmesg_log_func
|
||||
sync
|
||||
sleep 1
|
||||
mount -o remount,ro "${BOOTDIR}" | tee -a ${LOG}
|
||||
umount /dev/mmcblk0p4 | tee -a ${LOG}
|
||||
#umount /dev/mmcblk0p1 | tee -a ${LOG} # this fails
|
||||
mount -o remount,ro "${BOOTDIR}" 2>&1 | tee -a ${LOG}
|
||||
sleep 2
|
||||
umount /dev/mmcblk0p4 2>&1 # | tee -a ${LOG} - logging here may brake unmouting
|
||||
#umount /dev/mmcblk0p1 # this fails cuz we're running this script of /boot
|
||||
sleep 4
|
||||
}
|
||||
|
||||
@@ -145,13 +157,13 @@ safe_poweroff_func(){
|
||||
}
|
||||
|
||||
console_unknown_func(){
|
||||
echo "CONSOLE_VARIANT=unknown" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=unknown" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
echo "##DO_NOT_REMOVE_THIS_LINE##" >> ${BOOTDIR}/console.cfg
|
||||
}
|
||||
|
||||
## Default CONSOLE_VARIANT for st7789s screens
|
||||
default_console_func(){
|
||||
echo "CONSOLE_VARIANT=pocketgo" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=pocketgo" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
cp ${BOOTDIR}/suniv-f1c100s-miyoo-4bit.dtb ${BOOTDIR}/suniv-f1c100s-miyoo.dtb
|
||||
# No need to overwrite uboot FORCE version for default so continue procedure
|
||||
CONSOLE_OVERWRITE=false
|
||||
@@ -159,6 +171,7 @@ default_console_func(){
|
||||
|
||||
#Test-prompt dialogs fo various scenarios
|
||||
test_image_func(){
|
||||
echo "Performing Image Color Test" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --defaultno --ok-label NO --cancel-label Inverted --stdout --title " Test Image" \
|
||||
--colors --pause "\n\n \Z5Are your colors Inverted?\Zn\n\nSelect an option & press START" 12 34 10
|
||||
|
||||
@@ -169,16 +182,19 @@ test_image_func(){
|
||||
## thus we have valid version and simply continue
|
||||
if test $CHOICE -eq 0; then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 2 --msgbox "Colors are correct, proceed with flashing" 0 0
|
||||
echo "Colors are correct" >> ${LOG}
|
||||
# "INVERTED" choice for Test_Iamge msgbox DIALOG_CANCEL exit code and -1/255
|
||||
## thus correct "invert" colors parameter on video driver
|
||||
else
|
||||
#TODO - make "invert" flag overwriting less dependent
|
||||
echo "Colors are inverted, changing..." | tee -a ${LOG}
|
||||
echo "INVERT=${INVERSION}" >> ${HOME}/options.cfg
|
||||
safe_reboot_func
|
||||
fi
|
||||
}
|
||||
|
||||
test_video_func(){
|
||||
echo "Performing Video Test" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --defaultno --ok-label NO --cancel-label "Flipped!" --extra-button --extra-label YES --stdout --title " Test Video" \
|
||||
--colors --pause "\n\n \Z5Can you see this message?\Zn\n\nSelect an option & press START" 12 34 10
|
||||
|
||||
@@ -189,7 +205,7 @@ test_video_func(){
|
||||
# "YES" choice for Test_Video msgbox DIALOG_EXTRA exit code
|
||||
if test $CHOICE -eq 3; then
|
||||
# Correct variant for st7789s (non forced)
|
||||
echo "CONSOLE_VARIANT=st7789s" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=st7789s" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
# "Flipped!" choice for Test_Video msgbox DIALOG_CANCEL exit code
|
||||
elif test $CHOICE -eq 1; then
|
||||
# Test_Flip-prompt double checks if user selected correct answer for 1'st video test
|
||||
@@ -197,7 +213,7 @@ test_video_func(){
|
||||
# "NO" or timeout choice for Test_Video msgbox thus DIALOG_OK exit code
|
||||
elif test $CHOICE -eq 0; then
|
||||
# Correct variant for bittboy2x_v1 (non forced)
|
||||
echo "CONSOLE_VARIANT=bittboy" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
safe_reboot_func
|
||||
# Error (DIALOG_ERROR) or ESCAPE button pressed (DIALOG_ESCAPE) thus exit code -1/255
|
||||
else
|
||||
@@ -207,6 +223,7 @@ test_video_func(){
|
||||
}
|
||||
|
||||
test_video2_func(){
|
||||
echo "Performing Video Test-2 " >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --defaultno --ok-label NO --cancel-label YES --stdout --title " Test Video'2" \
|
||||
--colors --pause "\n\n \Z5Can you see this message?\Zn\n\nSelect an option & press START" 12 34 10
|
||||
|
||||
@@ -216,7 +233,7 @@ test_video2_func(){
|
||||
# "YES" choice for Test_Video'2 msgbox DIALOG_CANCEL exit code
|
||||
## thus we have valid version, just update to FORCE_VERSION and continue
|
||||
if test $CHOICE -eq 1; then
|
||||
echo "CONSOLE_VARIANT=bittboy2x_v1" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy2x_v1" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
# "NO" or timeout choice for Test_Video msgbox thus DIALOG_OK exit code 0 (or ERROR/ESCAPE with -1/255)
|
||||
## correct variant to unknown and redo whole flashing_prd again
|
||||
else
|
||||
@@ -226,6 +243,7 @@ test_video2_func(){
|
||||
}
|
||||
|
||||
test_keyboard_func(){
|
||||
echo "Performing Keyboard Test" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --ok-label NO --cancel-label YES --stdout --title " Test Keyboard" \
|
||||
--colors --pause "\n\n \Z5Does D-pad works correctly?\Zn\n\nSelect an option & press START" 12 34 10
|
||||
|
||||
@@ -237,28 +255,28 @@ test_keyboard_func(){
|
||||
## thus we have valid version, just update to FORCE_VERSION and continue
|
||||
if test $CHOICE -eq 1; then
|
||||
if test "$CONSOLE_VARIANT" == "bittboy3"; then
|
||||
echo "CONSOLE_VARIANT=bittboy3.5" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy3.5" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif test "$CONSOLE_VARIANT" == "bittboy2"; then
|
||||
echo "CONSOLE_VARIANT=bittboy2x_v2" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy2x_v2" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif test "$CONSOLE_VARIANT" == "xyc"; then
|
||||
echo "CONSOLE_VARIANT=xyc_gc9306" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=xyc_gc9306" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
# Test_Image-prompt if proper "invert" colors parameter was loaded:
|
||||
INVERSION=1 #applied only if colors are inverted
|
||||
test_image_func
|
||||
elif test "$CONSOLE_VARIANT" == "m3"; then
|
||||
echo "CONSOLE_VARIANT=m3_gc9306" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=m3_gc9306" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
fi
|
||||
# "NO" or timeout choice for Test_Keyboard msgbox DIALOG_OK exit code
|
||||
## thus correct Auto-Detection variant and reboot
|
||||
elif test $CHOICE -eq 0; then
|
||||
if test "$CONSOLE_VARIANT" == "bittboy3"; then
|
||||
echo "CONSOLE_VARIANT=bittboy2" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy2" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif test "$CONSOLE_VARIANT" == "bittboy2"; then
|
||||
console_unknown_func
|
||||
elif test "$CONSOLE_VARIANT" == "xyc"; then
|
||||
console_unknown_func
|
||||
elif test "$CONSOLE_VARIANT" == "m3"; then
|
||||
echo "CONSOLE_VARIANT=xyc" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=xyc" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
fi
|
||||
safe_reboot_func
|
||||
# Error (DIALOG_ERROR) or ESCAPE button pressed (DIALOG_ESCAPE) thus exit code -1/255
|
||||
@@ -269,6 +287,7 @@ test_keyboard_func(){
|
||||
}
|
||||
|
||||
test_variant_func(){
|
||||
echo "Performing Device-Variant Test" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --defaultno --ok-label NO --cancel-label YES --stdout --title " Test Variant" \
|
||||
--colors --pause "Does this device match yours?" 0 0 15
|
||||
|
||||
@@ -284,9 +303,10 @@ test_variant_func(){
|
||||
}
|
||||
|
||||
test_flip_func(){
|
||||
echo "Performing Confirmation Flip Test" >> ${LOG}
|
||||
if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --stdout --ok-label YES --cancel-label NO --title "Test Flip" --pause " \n Flipped? \n\nAre you sure?!" 12 15 10); then
|
||||
# Correct variant for bittboy3.5 (non forced) and display info about flipped image
|
||||
echo "CONSOLE_VARIANT=bittboy3" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=bittboy3" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 2 --msgbox "Image flipped! correct&reboot" 0 0
|
||||
sleep 1.5
|
||||
#TODO: use special Unicode characters to draw text upside-down e.g.:
|
||||
@@ -305,9 +325,12 @@ if (grep -qE "${DETECTED_1}|${DETECTED_2}|${DETECTED_3}|${DETECTED_4}|${DETECTED
|
||||
fi
|
||||
|
||||
# I - Test_Block
|
||||
echo "Starting I Block - Test" >> ${LOG}
|
||||
detect_console_func
|
||||
if ! $FOUND_CONSOLE && ! $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
echo "Auto-Detected Console's variant from uEnv" >> ${LOG}
|
||||
if (grep -q "$DETECTED_1" "${BOOTDIR}/uEnv.txt"); then
|
||||
echo "Auto-Detected $DETECTED_1" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_1" 0 0
|
||||
# Test_Video-prompt if proper miyoo video's version driver was loaded:
|
||||
## Loop Test_Video until correct selection has been performed (CHOICE=0/3)
|
||||
@@ -320,10 +343,10 @@ if ! $FOUND_CONSOLE && ! $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
done
|
||||
elif (grep -q "$DETECTED_2" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_2" 0 0
|
||||
echo "CONSOLE_VARIANT=m3" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=m3" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif (grep -q "$DETECTED_3" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_3" 0 0
|
||||
echo "CONSOLE_VARIANT=m3_r61520" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=m3_r61520" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
# Test_Image-prompt if proper "invert" colors parameter was loaded:
|
||||
INVERSION=0 #applied only if colors are inverted
|
||||
test_image_func
|
||||
@@ -332,25 +355,27 @@ if ! $FOUND_CONSOLE && ! $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
## DETECTED_5 - bittboy3/2
|
||||
elif (grep -q "$DETECTED_6" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_6" 0 0
|
||||
echo "CONSOLE_VARIANT=m3_rm68090" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=m3_rm68090" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif (grep -q "$DETECTED_7" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_7" 0 0
|
||||
#echo "CONSOLE_VARIANT=r61520" > ${BOOTDIR}/console.cfg
|
||||
#echo "CONSOLE_VARIANT=r61520" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif (grep -q "$DETECTED_8" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_8" 0 0
|
||||
#echo "CONSOLE_VARIANT=r61505w" > ${BOOTDIR}/console.cfg
|
||||
#echo "CONSOLE_VARIANT=r61505w" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif (grep -q "$DETECTED_9" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_9" 0 0
|
||||
echo "CONSOLE_VARIANT=m3_hx8347d" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=m3_hx8347d" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
elif (grep -q "$DETECTED_10" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_10" 0 0
|
||||
#echo "CONSOLE_VARIANT=unknown-error" > ${BOOTDIR}/console.cfg
|
||||
echo "Auto-Detected $DETECTED_10, so we have trouble finding correct drivers..." >> ${LOG}
|
||||
#echo "CONSOLE_VARIANT=unknown-error" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
fi
|
||||
# Overwrite CONSOLE_VARIANT from new entry
|
||||
source "${BOOTDIR}/console.cfg"
|
||||
fi
|
||||
|
||||
# II - Test_Block
|
||||
echo "Starting II Block - Test" >> ${LOG}
|
||||
## Defaulting to console overwriting inactive
|
||||
CONSOLE_OVERWRITE=false
|
||||
## Test if console have been found in devices_auto_ID
|
||||
@@ -359,6 +384,7 @@ detect_console_func
|
||||
if ! $FOUND_CONSOLE && $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
# show selection menu for ST7789S devices
|
||||
if (test "$CONSOLE_VARIANT" == "st7789s" && grep -q "$DETECTED_1" "${BOOTDIR}/uEnv.txt"); then
|
||||
echo "Selecting device by end-user choice." >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --timeout 60 --title "Select your device:" --menu " " 15 40 5 \
|
||||
1 "Powkiddy Q20" \
|
||||
2 "Powkiddy Q90" \
|
||||
@@ -373,35 +399,39 @@ if ! $FOUND_CONSOLE && $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
## Perform actions based on the user's choice
|
||||
case $CHOICE in
|
||||
1)
|
||||
echo "CONSOLE_VARIANT=q20" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=q20" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
cp ${BOOTDIR}/suniv-f1c100s-miyoo-4bit.dtb ${BOOTDIR}/suniv-f1c100s-miyoo.dtb
|
||||
;;
|
||||
2)
|
||||
echo "CONSOLE_VARIANT=q90" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=q90" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
cp ${BOOTDIR}/suniv-f1c100s-miyoo-4bit.dtb ${BOOTDIR}/suniv-f1c100s-miyoo.dtb
|
||||
;;
|
||||
3)
|
||||
echo "CONSOLE_VARIANT=v90" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=v90" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
cp ${BOOTDIR}/suniv-f1c100s-miyoo-4bit.dtb ${BOOTDIR}/suniv-f1c100s-miyoo.dtb
|
||||
;;
|
||||
4)
|
||||
default_console_func
|
||||
;;
|
||||
5)
|
||||
echo "CONSOLE_VARIANT=pocketgo_TE" > ${BOOTDIR}/console.cfg
|
||||
echo "CONSOLE_VARIANT=pocketgo_TE" | tee ${BOOTDIR}/console.cfg >> ${LOG}
|
||||
cp ${BOOTDIR}/suniv-f1c100s-miyoo-4bit.dtb ${BOOTDIR}/suniv-f1c100s-miyoo.dtb
|
||||
;;
|
||||
*)
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 4 --msgbox "Invalid choice. Exiting and selecting default device from autodetection." 0 0
|
||||
echo "Selecting default device from autodetection..." >> ${LOG}
|
||||
default_console_func
|
||||
sleep 0.1
|
||||
;;
|
||||
esac
|
||||
elif (((test "$CONSOLE_VARIANT" == "bittboy2" || test "$CONSOLE_VARIANT" == "bittboy3") && grep -q "$DETECTED_5" "${BOOTDIR}/uEnv.txt") || ((test "$CONSOLE_VARIANT" == "xyc" || test "$CONSOLE_VARIANT" == "m3") && grep -q "$DETECTED_2" "${BOOTDIR}/uEnv.txt")); then
|
||||
echo "Extra Auto-Detected Console's variant from uEnv" >> ${LOG}
|
||||
if (grep -q "$DETECTED_5" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_5" 0 0
|
||||
echo "Auto-Detected $DETECTED_5" >> ${LOG}
|
||||
elif (grep -q "$DETECTED_2" "${BOOTDIR}/uEnv.txt"); then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 4 --msgbox "Correcting $DETECTED_2 - wait for further instructions" 0 0
|
||||
echo "Auto-Detected $DETECTED_2" >> ${LOG}
|
||||
fi
|
||||
# Test_Keyboard-prompt if proper miyoo.kbd version was loaded:
|
||||
## Loop Test_Keyboard until correct selection has been performed (CHOICE=0/1)
|
||||
@@ -413,16 +443,19 @@ if ! $FOUND_CONSOLE && $FOUND_CONSOLE_AUTO && $CONSOLE_DETECTED; then
|
||||
done
|
||||
elif (test "$CONSOLE_VARIANT" == "bittboy" && grep -q "$DETECTED_4" "${BOOTDIR}/uEnv.txt") ; then
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 3 --msgbox "Auto-Detected $DETECTED_4" 0 0
|
||||
echo "Auto-Detected $DETECTED_4" >> ${LOG}
|
||||
# Test_Video'2-prompt if proper miyoo video's version driver was loaded:
|
||||
test_video2_func
|
||||
fi
|
||||
fi
|
||||
|
||||
# III - Test_Block
|
||||
echo "Starting III Block - Test" >> ${LOG}
|
||||
detect_console_func
|
||||
BITTBOY_CONFIG=false
|
||||
MIYOO_CONFIG=false
|
||||
if $FOUND_CONSOLE; then
|
||||
echo "Found console ${CONSOLE_VARIANT}" >> ${LOG}
|
||||
# Info_Box about selected/edited device in console.cfg
|
||||
case $CONSOLE_VARIANT in
|
||||
bittboy2x_v1)
|
||||
@@ -483,28 +516,35 @@ if $FOUND_CONSOLE; then
|
||||
# Test_Variant-prompt if correct CONSOLE_VARIANT has been written to console.cfg
|
||||
test_variant_func
|
||||
else
|
||||
echo "Didn't find correct console" >> ${LOG}
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --colors --timeout 2 --ok-label " Your device " --msgbox "\Zb\Z1 Unknown\Zn" 5 18
|
||||
console_unknown_func
|
||||
fi
|
||||
|
||||
# License_agreement-prompt
|
||||
echo "License agreement signing" >> ${LOG}
|
||||
if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --ok-label NO --cancel-label YES --stdout --title " License agreement" \
|
||||
--colors --pause "\n \ZbMiyooCFW\Zn\n$LICENSE" 22 60 30 || test $? -eq 255); then
|
||||
echo -en " We understand. Have a nice day!\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"
|
||||
echo -en " We understand. Have a nice day!\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" | tee -a ${LOG}
|
||||
sleep 1
|
||||
console_unknown_func
|
||||
safe_poweroff_func
|
||||
fi
|
||||
|
||||
# Format swap parition
|
||||
/sbin/mkswap /dev/mmcblk0p3
|
||||
/sbin/swapon /dev/mmcblk0p3
|
||||
|
||||
echo "Formatting swap P3 partition" | tee -a ${LOG}
|
||||
sleep 1
|
||||
/sbin/swapoff -a 2>&1 | tee -a ${LOG} # unplug SWAP, otherwise if present it won't be recreated via mkswap
|
||||
/sbin/mkswap /dev/mmcblk0p3 2>&1 | tee -a ${LOG}
|
||||
/sbin/swapon /dev/mmcblk0p3 2>&1 | tee -a ${LOG}
|
||||
echo -en "\n Available memory:\n" >> ${LOG}
|
||||
free -m >> ${LOG}
|
||||
sync
|
||||
sleep 1
|
||||
mount -o remount,ro "${BOOTDIR}" | tee -a ${LOG}
|
||||
mount -o remount,ro "${BOOTDIR}" 2>&1 | tee -a ${LOG}
|
||||
|
||||
#define priamry partitions FS types
|
||||
#define primary partitions FS types
|
||||
##TODO: detect FS type in script eg. grep `df -Th` cmd
|
||||
P4_FS_TYPE="BTRFS"
|
||||
P5_FS_TYPE="EXT4"
|
||||
|
||||
@@ -531,6 +571,7 @@ SD_MAX_AVAIL_SIZE="$((${SD_SIZE} - (${P1_SIZE} + ${P2_SIZE} + ${P3_SIZE} + ${P4_
|
||||
SD_MAX_AVAIL_SIZE_IN_KiB=$((SD_MAX_AVAIL_SIZE * 512 / 1024))
|
||||
|
||||
# Change_MAIN_FileSystem-prompt for the p4 partition if requested
|
||||
echo "Change MAIN FileSystem procedure" >> ${LOG}
|
||||
CHANGE_FS_P4=false
|
||||
if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label ${P4_FS_TYPE}\(default\) --cancel-label EXT4 --title " Change FileSystem" \
|
||||
--colors --pause "\n\n\Z5Change default FileSystem of MAIN?\Zn\n\n BTRFS - safe & reliable\Zn\n\n EXT4 - fast & optimal\Zn\n\n Select an option & press START
|
||||
@@ -541,29 +582,40 @@ if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label ${
|
||||
else
|
||||
P4_FS_TYPE="EXT4"
|
||||
echo -en "\n\nConverting the MAIN partition filesystem to ${P4_FS_TYPE} type.\n\n" | tee -a ${LOG}
|
||||
echo -en "This can take a few minutes, be patient!"
|
||||
echo -en "\e[32mThis can take a few minutes, be patient!\e[0m"
|
||||
sleep 3
|
||||
mkdir "${ROMS}"/backup
|
||||
mkdir "${ROMS}"/backup 2>&1 | tee -a ${LOG}
|
||||
rsync -a --info=nonreg0 --info=progress2 "${HOME}" "${ROMS}"/backup
|
||||
umount /dev/mmcblk0p4 | tee -a ${LOG}
|
||||
echo $? > $TEMP && EXIT_CODE=$(cat $TEMP)
|
||||
if test $EXIT_CODE -eq 0; then
|
||||
echo "Archiving ${HOME} partition successful" | tee -a ${LOG_TEMP}
|
||||
else
|
||||
echo -en "\033[0;31mArchiving ${HOME} to ${ROMS}/backup failed with rsync exit code ${EXIT_CODE}\033[0m" | tee -a ${LOG_TEMP}
|
||||
fi
|
||||
sleep 2
|
||||
umount /dev/mmcblk0p4 2>&1 | tee -a ${LOG_TEMP}
|
||||
clear
|
||||
echo -en "\n\n"
|
||||
mkfs.ext4 -d "${ROMS}"/backup/"${HOME}" -L MAIN -v -F /dev/mmcblk0p4 | tee -a ${LOG}
|
||||
mkfs.ext4 -d "${ROMS}"/backup/"${HOME}" -L MAIN -v -F /dev/mmcblk0p4 2>&1 | tee -a ${LOG_TEMP}
|
||||
sleep 2
|
||||
e2fsck -y /dev/mmcblk0p4 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p4 "${HOME}" -o rw,sync,exec | tee -a ${LOG}
|
||||
#cp -v -a "${ROMS}"/backup/"${HOME}" /
|
||||
rm -r "${ROMS}"/backup
|
||||
e2fsck -y /dev/mmcblk0p4 2>&1 | tee -a ${LOG_TEMP}
|
||||
mount /dev/mmcblk0p4 "${HOME}" -o rw,sync,exec 2>&1 | tee -a ${LOG_TEMP}
|
||||
restore_temp_log_func
|
||||
rm -r "${ROMS}"/backup 2>&1 | tee -a ${LOG}
|
||||
CHANGE_FS_P4=true
|
||||
fi
|
||||
## Correct inittab for new p4 filesystem type
|
||||
if ( $CHANGE_FS_P4 ); then
|
||||
if $CHANGE_FS_P4 && test "${P4_FS_TYPE}" == "EXT4" ; then
|
||||
echo "Correcting inittab of p4 at ${HOME} procedure" >> ${LOG}
|
||||
sleep 1
|
||||
mount -o remount,rw / /
|
||||
sed -i "s|\(::sysinit:/bin/mount /dev/mmcblk0p4\).*|\1 "${HOME}" -o rw,sync,exec|" /etc/inittab
|
||||
mount -o remount,ro / /
|
||||
cat /etc/inittab >> ${LOG}
|
||||
fi
|
||||
|
||||
# Change_ROMS_FileSystem-prompt for the p5 partition if requested
|
||||
echo "Change ROMS FileSystem procedure" >> ${LOG}
|
||||
CHANGE_FS_P5=false
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label "${P5_FS_TYPE}(def.)" --cancel-label BTRFS --extra-button --extra-label FAT32 --title " Change FileSystem" \
|
||||
--colors --pause "\n\n\Z5Change default FileSystem for ROMS?\Zn\n\nEXT4 - fast write/read & UNIX compliant\Zn\n\nBTRFS - slow read but poweroff safe, UNIX compliant\Zn\n\nFAT32 - slow on-device write but Windows compatbile\Zn\n\n Select an option & press START
|
||||
@@ -584,29 +636,44 @@ else
|
||||
dialog --backtitle "MiyooCFW 2.0" --no-shadow --timeout 2 --msgbox "Invalid choice, continuing with default setup!" 0 0
|
||||
sleep 1.5
|
||||
fi
|
||||
if ( $CHANGE_FS_P5 ); then
|
||||
if $CHANGE_FS_P5; then
|
||||
echo -en "\n\nConverting the ROMS partition filesystem to ${P5_FS_TYPE} type.\n\n" | tee -a ${LOG}
|
||||
echo -en "This can take a few minutes, be patient!"
|
||||
echo -en "\e[32mThis can take a few minutes, be patient!\e[0m"
|
||||
sleep 3
|
||||
mkdir "${HOME}"/backup
|
||||
mkdir "${HOME}"/backup 2>&1 | tee -a ${LOG}
|
||||
rsync -a --info=nonreg0 --info=progress2 "${ROMS}" "${HOME}"/backup
|
||||
umount /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
echo $? > $TEMP && EXIT_CODE=$(cat $TEMP)
|
||||
if test $EXIT_CODE -eq 0; then
|
||||
echo "Archiving ${ROMS} partition successful" | tee -a ${LOG}
|
||||
else
|
||||
echo "\033[0;31mArchiving ${ROMS} to ${HOME}/backup failed with rsync exit code ${EXIT_CODE}\033[0m" | tee -a ${LOG}
|
||||
fi
|
||||
sleep 2
|
||||
umount /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
clear
|
||||
echo -en "\n\n"
|
||||
if test "${P5_FS_TYPE}" == "FAT32"; then
|
||||
mkfs.vfat -n ROMS -v -F32 /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
mkfs.vfat -n ROMS -v -F32 /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
sleep 2
|
||||
fsck.fat -y /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -t vfat -o rw,utf8 | tee -a ${LOG}
|
||||
fsck.fat -y /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -t vfat -o rw,utf8 2>&1 | tee -a ${LOG}
|
||||
rsync -rvt --modify-window=1 --exclude "lost+found" --info=nonreg0 --info=progress2 "${HOME}"/backup"${ROMS}" /
|
||||
echo $? > $TEMP && EXIT_CODE=$(cat $TEMP)
|
||||
if test $EXIT_CODE -eq 0; then
|
||||
echo "Extracting archive in ${ROMS} partition successful" | tee -a ${LOG}
|
||||
else
|
||||
echo "\033[0;31mExtracting archive ${ROMS} from ${HOME}/backup${ROMS} failed with rsync exit code ${EXIT_CODE}\033[0m" | tee -a ${LOG}
|
||||
fi
|
||||
elif test "${P5_FS_TYPE}" == "BTRFS"; then
|
||||
mkfs.btrfs -r "${HOME}"/backup"${ROMS}" -v -f -L ROMS /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
mkfs.btrfs -r "${HOME}"/backup"${ROMS}" -v -f -L ROMS /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
sleep 2
|
||||
btrfsck -y /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o commit=5,flushoncommit,noatime,nodiratime | tee -a ${LOG}
|
||||
btrfsck /dev/mmcblk0p5 2>&1 | tee -a ${LOG} # does not repair FS, just check integrity as it is dengarous to do so
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o commit=5,flushoncommit,noatime,nodiratime 2>&1 | tee -a ${LOG}
|
||||
fi
|
||||
rm -r "${HOME}"/backup
|
||||
## Correct inittab for new p5 filesystem type
|
||||
echo "Correcting inittab of p5 at ${ROMS} procedure" >> ${LOG}
|
||||
sleep 1
|
||||
mount -o remount,rw / /
|
||||
if test "${P5_FS_TYPE}" == "FAT32"; then
|
||||
sed -i "s|\(::sysinit:/bin/mount /dev/mmcblk0p5\).*|\1 "${ROMS}" -t vfat -o rw,utf8|" /etc/inittab
|
||||
@@ -614,9 +681,11 @@ if ( $CHANGE_FS_P5 ); then
|
||||
sed -i "s|\(::sysinit:/bin/mount /dev/mmcblk0p5\).*|\1 "${ROMS}" -o commit=5,flushoncommit,noatime,nodiratime|" /etc/inittab
|
||||
fi
|
||||
mount -o remount,ro / /
|
||||
cat /etc/inittab >> ${LOG}
|
||||
fi
|
||||
|
||||
# Expand_ROMS_Partition-prompt for the p5 (ROMS) partition if requested
|
||||
echo "Expand ROMS FileSystem procedure" >> ${LOG}
|
||||
RESIZE_COMMENCED=false
|
||||
if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label YES --cancel-label NO --title " AUTO-RESIZE" \
|
||||
--colors --pause "\n\n \Z5Expand ROMS partition?\Zn\n\n Select an option & press START
|
||||
@@ -642,42 +711,45 @@ if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label YE
|
||||
\n\nWe could however expand it to 118GB. \n\n \ZuDo you AGREE?\Zn
|
||||
\n\n\ZbINFO: For microSD >128GB big we\n recommend to use your PC!\Zn" 0 0 30 || test $? -eq 255); then
|
||||
dialog --clear --colors --timeout 2 --msgbox " FAT resizing \ZuABORTED!\Zn" 5 27
|
||||
echo "Your SD card exceeds max. 128G size for auto-resizing!" >> ${LOG}
|
||||
clear
|
||||
RESIZE_ABORT=true
|
||||
else
|
||||
SD_MAX_AVAIL_SIZE_IN_KiB=123731968
|
||||
echo "Your SD card exceeds max. 128G so picked that value instead!" >> ${LOG}
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
if ! $RESIZE_ABORT; then
|
||||
echo "Performing resize on ${ROMS}" >> ${LOG}
|
||||
echo "The full size of your SD is ${SD_SIZE_IN_MiB}MB large" | tee -a ${LOG}
|
||||
echo "Unallocated space available for resizing equals ${SD_MAX_UNALL_SIZE_IN_GiB}GB," | tee -a ${LOG}
|
||||
echo "and more precisely it's ${SD_MAX_UNALL_SIZE_IN_MiB}MB big" | tee -a ${LOG}
|
||||
echo "Resizing the ROMS (${P5_FS_TYPE}) partition to ${SD_MAX_AVAIL_SIZE_IN_GiB}GB." | tee -a ${LOG}
|
||||
umount /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
umount /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
if test "${P5_FS_TYPE}" == "FAT32"; then
|
||||
echo "This can take a minute, so be patient!" | tee -a ${LOG}
|
||||
echo -en "\e[32mThis can take a few minutes, be patient!\e[0m"
|
||||
#TODO: fix outputting logs from fatresize stdout
|
||||
fatresize --size="${SD_MAX_AVAIL_SIZE_IN_KiB}"ki -v -p /dev/mmcblk0p5 -n5 | tee -a ${LOG}
|
||||
fsck.fat -y /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
fatresize --size="${SD_MAX_AVAIL_SIZE_IN_KiB}"ki -v -p /dev/mmcblk0p5 -n5 2>&1 | tee -a ${LOG}
|
||||
fsck.fat -y /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
#echo -n -e \\xEB\\x58\\x90 > /dev/mmcblk0p5
|
||||
sync
|
||||
mount -t vfat -o rw,utf8 /dev/mmcblk0p5 "${ROMS}" | tee -a ${LOG}
|
||||
mount -t vfat -o rw,utf8 /dev/mmcblk0p5 "${ROMS}" 2>&1 | tee -a ${LOG}
|
||||
else
|
||||
echo "This can take a few seconds." | tee -a ${LOG}
|
||||
echo -en "\e[32mThis can take a few seconds!\e[0m"
|
||||
P5_START_POINT=` parted --script /dev/mmcblk0 unit MB print | grep '5' | tail -n1 | awk '{print $2}'`
|
||||
parted -a optimal /dev/mmcblk0 --script rm '5' | tee -a ${LOG}
|
||||
parted -a optimal /dev/mmcblk0 --script mkpart roms $P5_START_POINT 100% | tee -a ${LOG}
|
||||
partx -u /dev/mmcblk0 | tee -a ${LOG}
|
||||
parted -a optimal /dev/mmcblk0 --script rm '5' 2>&1 | tee -a ${LOG}
|
||||
parted -a optimal /dev/mmcblk0 --script mkpart roms $P5_START_POINT 100% 2>&1 | tee -a ${LOG}
|
||||
partx -u /dev/mmcblk0 2>&1 | tee -a ${LOG}
|
||||
if test "${P5_FS_TYPE}" == "BTRFS"; then
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o rw,noatime | tee -a ${LOG}
|
||||
btrfs filesystem resize max ${ROMS} | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o rw,noatime 2>&1 | tee -a ${LOG}
|
||||
btrfs filesystem resize max ${ROMS} 2>&1 | tee -a ${LOG}
|
||||
else #EXT4
|
||||
resize2fs /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
e2fsck -y /dev/mmcblk0p5 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o rw,noatime,nodiratime | tee -a ${LOG}
|
||||
resize2fs /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
e2fsck -y /dev/mmcblk0p5 2>&1 | tee -a ${LOG}
|
||||
mount /dev/mmcblk0p5 "${ROMS}" -o rw,noatime,nodiratime 2>&1 | tee -a ${LOG}
|
||||
fi
|
||||
partprobe
|
||||
partprobe 2>&1 | tee -a ${LOG}
|
||||
fi
|
||||
RESIZE_COMMENCED=true
|
||||
else
|
||||
@@ -686,20 +758,20 @@ if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --ok-label YE
|
||||
fi
|
||||
fi
|
||||
if ! $RESIZE_COMMENCED && test "${P5_FS_TYPE}" == "FAT32" ; then
|
||||
sgdisk --typecode=5:0700 /dev/mmcblk0 # Microsoft basic data - partition type
|
||||
partprobe
|
||||
sgdisk --typecode=5:0700 /dev/mmcblk0 2>&1 | tee -a ${LOG} # Microsoft basic data - partition type
|
||||
partprobe 2>&1 | tee -a ${LOG}
|
||||
fi
|
||||
# output FS table with type
|
||||
df -Th >> ${LOG}
|
||||
df -Th >> ${LOG} 2>&1
|
||||
|
||||
# Cleanup - delete the temporary file storing variable value
|
||||
rm $TEMP
|
||||
|
||||
# disable this script
|
||||
mount -o remount,rw "${BOOTDIR}" | tee -a ${LOG}
|
||||
mount -o remount,rw "${BOOTDIR}" 2>&1 | tee -a ${LOG}
|
||||
echo "Disabling the firstboot script." | tee -a ${LOG}
|
||||
mv "${BOOTDIR}/firstboot" "${BOOTDIR}/firstboot.done" | tee -a ${LOG}
|
||||
mount -o remount,ro "${BOOTDIR}" | tee -a ${LOG}
|
||||
mv "${BOOTDIR}/firstboot" "${BOOTDIR}/firstboot.done" 2>&1 | tee -a ${LOG}
|
||||
mount -o remount,ro "${BOOTDIR}" 2>&1 | tee -a ${LOG}
|
||||
|
||||
# copy over the config files
|
||||
echo "Copying default configuration files into place..." | tee -a ${LOG}
|
||||
@@ -708,6 +780,8 @@ if $BITTBOY_CONFIG; then
|
||||
elif $MIYOO_CONFIG; then
|
||||
cp "${HOME}/gmenu2x/input_miyoo.conf" "${HOME}/gmenu2x/input.conf"
|
||||
fi
|
||||
echo -en "\nUsing following GMenu2X input configuration:\n" >> ${GMENU2X_LOGS}
|
||||
cat "${HOME}/gmenu2x/input.conf" >> ${GMENU2X_LOGS}
|
||||
|
||||
sync
|
||||
echo "firstboot script finished." | tee -a ${LOG}
|
||||
@@ -716,13 +790,13 @@ echo
|
||||
|
||||
#install IPK packages
|
||||
echo "starting ipk install manager..." | tee -a ${LOG}
|
||||
${BOOTDIR}/ipk_install.sh | tee -a ${LOG}
|
||||
${BOOTDIR}/ipk_install.sh 2>&1 | tee -a ${LOG}
|
||||
|
||||
# Reboot device if CONSOLE_VARIANT was overwritten from $CHOICE so that it could be applied in u-boot by readID
|
||||
## or found firstboot custom script
|
||||
if ($CONSOLE_OVERWRITE || test -r "${BOOTDIR}/firstboot.custom.sh"); then
|
||||
safe_reboot_func
|
||||
else
|
||||
#just grep logs from temp directory before continuing
|
||||
yes | mv ${LOG} ${HOME}/log_firstboot.txt
|
||||
#just grep logs from temp directory before continuing just in case
|
||||
restore_temp_log_func
|
||||
fi
|
||||
|
||||
@@ -67,11 +67,11 @@ if (dialog --backtitle "MiyooCFW 2.0" --no-shadow --clear --stdout --title "WARN
|
||||
clear
|
||||
for package in $selected_packages; do
|
||||
ipk_package="${help_messages[$((2 * package + 1))]}"
|
||||
echo "Installing $ipk_package..."
|
||||
echo "Installing $ipk_package..." | tee -a ${LOG}
|
||||
if opkg install "$ipk_package" 2>/dev/null; then
|
||||
echo "$ipk_package installed successfully."
|
||||
echo "$ipk_package installed successfully." | tee -a ${LOG}
|
||||
else
|
||||
echo "Failed to install $ipk_package."
|
||||
echo "Failed to install $ipk_package." | tee -a ${LOG}
|
||||
fi
|
||||
done
|
||||
echo "Installation complete."
|
||||
|
||||
Reference in New Issue
Block a user