Merge from bittboy/buildroot@db180c0

board/altera/socrates_cyclone5/boot-env.txt

@@ -0,0 +1,8 @@
+linux_load_address=0x100000
+linux_dtb_load_address=0x100
+linux_dtb=socfpga_cyclone5_socrates.dtb
+linux_load=mmc rescan; fatload mmc 0:1 ${linux_load_address} zImage; fatload mmc 0:1 ${linux_dtb_load_address} ${linux_dtb}
+bootargs=console=ttyS0,115200 root=/dev/mmcblk0p3 ro rootwait
+source_env=fatload mmc 0:1 0x2000000 boot.scr; source 0x2000000
+bootcmd=run linux_load; bootz ${linux_load_address} - ${linux_dtb_load_address}
+bootdelay=1

board/altera/socrates_cyclone5/genimage.cfg

@@ -0,0 +1,58 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"socfpga_cyclone5_socrates.dtb"
+		}
+	}
+	size = 8M
+}
+
+image uboot.img {
+	hdimage {
+		partition-table = "no"
+	}
+
+	partition spl {
+		in-partition-table = "no"
+		image = "u-boot-spl.bin.crc"
+		offset = 0
+		size = 64k
+	}
+
+	partition uboot-full {
+		in-partition-table = "no"
+		image = "u-boot.img"
+		offset = 256k
+	}
+
+	size = 1M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition uboot-env {
+		in-partition-table = "no"
+		image = "uboot-env.bin"
+		offset = 17408 # 512 * 34 -> just after gpt
+	}
+
+	partition boot {
+		partition-type = 0xc
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition uboot {
+		partition-type = 0xa2
+		image = "uboot.img"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		size = 500M
+	}
+}

board/altera/socrates_cyclone5/readme.txt

@@ -0,0 +1,52 @@
+EBV SoCrates Evaluation Board
+
+Intro
+=====
+
+More information about this board can be found here:
+https://rocketboards.org/foswiki/Documentation/EBVSoCratesEvaluationBoard
+
+Build
+=====
+
+First, load socrates config for buildroot
+
+    make socrates_cyclone5_defconfig
+
+Build everything
+
+    make
+
+Following files will be generated in output/images
+
+.
+├── boot.vfat
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── socfpga_cyclone5_socrates.dtb
+├── u-boot-spl.bin
+├── u-boot-spl.bin.crc
+├── u-boot.bin
+├── u-boot.img
+├── uboot-env.bin
+├── uboot.img
+└── zImage
+
+
+Creating bootable SD card
+=========================
+
+Simply invoke
+
+dd if=output/images/sdcard.img of=/dev/sdX
+
+Where X is your SD card device (not partition)
+
+Booting
+=======
+
+Pins 6:8 on P18 selector is used to determine boot device. To boot socrates from
+sdcard set these pins to value 0x5 (101b). Remaining pins are used to determine
+how to configure FPGA and are not associated with booting into Linux kernel.