Merge from bittboy/buildroot@db180c0

board/freescale/imx23evk/readme.txt

@@ -0,0 +1,48 @@
+**************************
+Freescale i.MX23 EVK board
+**************************
+
+This file documents the Buildroot support for the Freescale i.MX23 EVK board.
+
+Build
+=====
+
+First, configure Buildroot for your i.MX23 EVK board:
+
+  make imx23evk_defconfig
+
+Build all components:
+
+  make
+
+You will find in output/images/ directory the following files:
+  - imx23-evk.dtb
+  - rootfs.tar
+  - u-boot.sd
+  - zImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Then, run the following command:
+
+*** WARNING! The command will destroy all the card content. Use with care! ***
+
+ sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
+
+Boot the i.MX23 EVK board
+=========================
+
+- Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot
+  from the SD card
+- Insert the SD card in the SD Card slot of the board;
+- Connect an RS232 UART cable to the Debug UART Port and connect using a
+  terminal emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!