Merge from bittboy/buildroot@db180c0

board/nexbox/a95x/readme.txt

@@ -0,0 +1,48 @@
+Nexbox A95X
+
+Intro
+=====
+
+Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
+(quad A53), 8/16GB eMMC and 1/2GB RAM.  To use this defconfig, wires to the
+internal UART solder pads must be added.  See the linux-meson page for
+details:
+
+http://linux-meson.com/doku.php?id=nexbox_a95x_s905
+
+Both the s905 (gxbb) and s905x (gxl) variant is supported.
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the A95X.  With the current configuration it will
+bring-up the board from microSD, and allow access through the serial
+console.
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make nexbox_a95x_defconfig
+
+Compile everything and build the SD card image:
+
+    $ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto a microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+How to boot
+===========
+
+Insert microSD card and connect serial cable. Power board and stop
+U-Boot by pressing any key. Boot the system by typing:
+
+fatload mmc 0:1 0x1070000 boot.scr
+autoscr 0x1070000