Merge from bittboy/buildroot@db180c0

board/technexion/imx6ulpico/readme.txt

@@ -0,0 +1,70 @@
+*****************************
+Technexion i.MX6UL Pico board
+*****************************
+
+This file documents the Buildroot support for the Technexion i.MX6UL Pico board.
+
+Build
+=====
+
+First, configure Buildroot for the i.MX6UL Pico board:
+
+  make imx6ulpico_defconfig
+
+Build all components:
+
+  make
+
+You will find in output/images/ the following files:
+  - imx6ul-pico-hobbit.dtb
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - u-boot.imx
+  - zImage
+
+Create a bootable SD card
+=========================
+
+In the U-Boot prompt lauch:
+
+=> ums 0 mmc 0
+
+This will mount the eMMC content in the host PC as a mass storage device.
+
+To determine the device associated to the eMMC card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on the eMMC card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/common/imx/genimage.cfg.template.
+
+Boot the i.MX6UL Pico board
+=========================
+
+To boot your newly created system:
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+  emulator at 115200 bps, 8n1;
+- power on the board.
+
+Using Wifi
+==========
+
+# modprobe brcmfmac
+# iwconfig wlan0 essid ACCESSPOINTNAME
+# wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf
+(enter the wifi password and press enter)
+# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
+# udhcpc -i wlan0
+# ping buildroot.org
+
+Enjoy!

board/technexion/imx6ulpico/rootfs_overlay/lib/firmware/brcm/brcmfmac4339-sdio.txt

@@ -0,0 +1,102 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA.
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xFF47,0x17B5,0xFD2B
+pa2gccka0=0xFF5F,0x1B46,0xFCCC
+pa5ga0=0xff54,0x16ec,0xfd45,0xff52,0x16a1,0xfd4d,0xff46,0x15b7,0xfd5a,0xff56,0x156d,0xfd79
+pa5gbw40a0=0xff59,0x17ca,0xfd30,0xff42,0x163d,0xfd4b,0xff31,0x152e,0xfd55,0xff60,0x16d8,0xfd54
+pa5gbw80a0=0xff56,0x1740,0xfd3f,0xff50,0x1738,0xfd3d,0xff4d,0x16b4,0xfd42,0xff58,0x1634,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa866666
+mcsbw405glpo=0xaa866666
+mcsbw805glpo=0xaa866666
+mcsbw205gmpo=0xaa866666
+mcsbw405gmpo=0xaa866666
+mcsbw805gmpo=0xaa866666
+mcsbw205ghpo=0xaa866666
+mcsbw405ghpo=0xaa866666
+mcsbw805ghpo=0xaa866666
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+#GPIO 0 for SDIO HW OOB interruption
+#muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1