bump version to 2022.02.9

add miyoo_defconfig

board/olimex/a13_olinuxino/genimage.cfg

@@ -1,12 +1,13 @@
 image boot.vfat {
-        vfat {
-                files = {
-                        "zImage",
-                        "sun5i-a13-olinuxino.dtb",
-                        "boot.scr"
-                }
-        }
-        size = 64M
+	vfat {
+		files = {
+			"zImage",
+			"sun5i-a13-olinuxino.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 64M
 }
 
 image sdcard.img {
@@ -16,16 +17,15 @@ image sdcard.img {
 	partition u-boot {
 		in-partition-table = "no"
 		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
+		offset = 8K
+		size = 1016K # 1MB - 8KB
 	}
 
-        partition boot {
-                partition-type = 0xC
-                bootable = "true"
-                image = "boot.vfat"
-        }
-
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
 
 	partition rootfs {
 		partition-type = 0x83

board/olimex/a20_olinuxino/genimage.cfg

@@ -5,8 +5,8 @@ image sdcard.img {
 	partition u-boot {
 		in-partition-table = "no"
 		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
+		offset = 8K
+		size = 1016K # 1MB - 8KB
 	}
 
 	partition rootfs {

board/olimex/a20_olinuxino/linux-disable-lima.fragment

@@ -0,0 +1,2 @@
+# Disable LIMA in favour of Mali
+# CONFIG_DRM_LIMA is not set

board/olimex/a20_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label Olinuxino
+    kernel /boot/zImage
+    fdtdir /boot
+    append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 drm_kms_helper.drm_leak_fbdev_smem=1 drm_kms_helper.drm_fbdev_overalloc=200 ${extra}

board/olimex/a33_olinuxino/genimage.cfg

@@ -5,8 +5,8 @@ image sdcard.img {
 	partition u-boot {
 		in-partition-table = "no"
 		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
+		offset = 8K
+		size = 1016K # 1MB - 8KB
 	}
 
 	partition rootfs {

board/olimex/a64-olinuxino/genimage.cfg

@@ -6,6 +6,7 @@ image boot.vfat {
 			"boot.scr"
 		}
 	}
+
 	size = 64M
 }
 
@@ -13,17 +14,11 @@ image sdcard.img {
 	hdimage {
 	}
 
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8192
-	}
-
 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40K
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1032K # 1MB - 8KB + 16KB(GPT)
 	}
 
 	partition boot {

board/olimex/stmp1_olinuxino/genimage.cfg

@@ -0,0 +1,25 @@
+image sdcard.img {
+	hdimage {
+		gpt = "true"
+	}
+
+	partition fsbl1 {
+		image = "u-boot-spl.stm32"
+		size = 256K
+	}
+
+	partition fsbl2 {
+		image = "u-boot-spl.stm32"
+		size = 256K
+	}
+
+	partition ssbl {
+		image = "u-boot.img"
+		size = 2M
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		bootable = "yes"
+	}
+}

board/olimex/stmp1_olinuxino/linux.config

@@ -0,0 +1,125 @@
+CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_SMP=y
+CONFIG_HIGHMEM=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
+CONFIG_UEVENT_HELPER=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OF_OVERLAY=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_MICREL_PHY=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_NULL_TTY=m
+CONFIG_SERIAL_DEV_BUS=m
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_STM32=m
+CONFIG_SPI_STM32_QSPI=m
+CONFIG_PINCTRL_AXP209=m
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=m
+CONFIG_DRM_STM_DSI=m
+CONFIG_DRM_PANEL_LVDS=m
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m
+CONFIG_DRM_ITE_IT66121=m
+CONFIG_DRM_ETNAVIV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GPIO=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_UIO=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_DMEM_GENIRQ=m
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_CLKSRC_STM32_LP=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=m
+CONFIG_PWM_STM32_LP=m
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_VFAT_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y

board/olimex/stmp1_olinuxino/readme.txt

@@ -0,0 +1,53 @@
+STMP157-OLinuXino-LIME2
+
+Intro
+=====
+
+These are open hardware boards, all based on the STmicro STMP157 SoC.
+
+for more details about the board see the following pages:
+ - https://www.olimex.com/Products/OLinuXino/open-source-hardware
+ - https://www.olimex.com/Products/OLinuXino/STMP1/STMP157-OLinuXino-LIME2/
+
+The following defconfigs are available:
+ - olimex_stmp157_olinuxino_lime_defconfig
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make <board>_defconfig
+
+Compile everything and build the rootfs image:
+
+    $ make
+
+Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+    output/images/
+    +-- rootfs.ext2
+    +-- rootfs.ext4 -> rootfs.ext2
+    +-- sdcard.img
+    +-- stm32mp1xx-olinuxino-lime.dtb
+    +-- u-boot-spl.stm32
+    +-- u-boot.img
+    `-- zImage
+
+
+How to write the SD card
+========================
+
+The sdcard.img file is a complete bootable image ready to be written
+on the boot medium. To install it, simply copy the image to a uSD
+card:
+
+    # dd if=output/images/sdcard.img of=/dev/sdX
+
+Where 'sdX' is the device node of the uSD.
+
+Eject the SD card, insert it in the STMP1-OLinuXino board, and power it up.
+

board/olimex/stmp1_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label stmp1-olinuxino-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp1xx-olinuxino-lime.dtb
+  append root=/dev/mmcblk0p4 rootwait