bump version to 2022.02.9

add miyoo_defconfig

board/udoo/common/boot.scr.txt

@@ -0,0 +1,7 @@
+setenv finduuid "part uuid mmc 1:1 uuid"
+run finduuid
+run findfdt
+setenv bootargs "console=${console} root=PARTUUID=${uuid} rootwait rootfstype=ext4"
+load mmc 1:1 ${fdt_addr} boot/${fdtfile}
+load mmc 1:1 ${loadaddr} boot/zImage
+bootz ${loadaddr} - ${fdt_addr}

board/udoo/common/post-build.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr

board/udoo/mx6qdl/linux.fragment

@@ -1 +0,0 @@
-# CONFIG_USB is not set

board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch

@@ -0,0 +1,26 @@
+[PATCH] ARM: dts: imx6qdl-udoo: Disable usbh1 to avoid kernel hang
+
+Currently the kernel hangs when USB Host1 is enabled due to the lack of
+support for controlling the USB hub clock and GPIO reset line.
+
+Peter Chen has made several attempts to fix this problem, but his series
+has not been applied yet, so better disable USB host1 for now to avoid
+the kernel hang.
+
+Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
+---
+
+diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+index 828dd20cd27d..c9e122865312 100644
+--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+@@ -292,7 +292,8 @@ &usbh1 {
+ 	pinctrl-0 = <&pinctrl_usbh>;
+ 	vbus-supply = <&reg_usb_h1_vbus>;
+ 	clocks = <&clks IMX6QDL_CLK_CKO>;
+-	status = "okay";
++	/* currently USB support causes a kernel hang. Disable it for now */
++	status = "disabled";
+ };
+ 
+ &usbotg {

board/udoo/mx6qdl/readme.txt

@@ -14,4 +14,4 @@ directory, ready to be dumped on a micro SD card:
 dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
 
 For details about the medium image layout, see the definition in
-board/udoo/mx6qdl/genimage.cfg.
+board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl.

board/udoo/neo/boot.scr.txt

@@ -1,7 +0,0 @@
-setenv finduuid "part uuid mmc 0:1 uuid"
-run finduuid
-run findfdt
-setenv bootargs "console=ttymxc0,115200 root=PARTUUID=${uuid} rootwait rootfstype=ext4"
-load mmc 0:1 ${fdt_addr} boot/${fdtfile}
-load mmc 0:1 ${loadaddr} boot/zImage
-bootz ${loadaddr} - ${fdt_addr}

board/udoo/neo/genimage.cfg

@@ -1,32 +0,0 @@
-# Minimal SD card image for the MX6SX Udoo Neo board
-#
-# The SD card must have at least 1 MB free at the beginning.
-# U-Boot and its environment are dumped as is.
-# A single root filesystem partition is required (Ext4 in this case).
-#
-# For details about the layout, see:
-# http://wiki.wandboard.org/index.php/Boot-process
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition spl {
-    in-partition-table = "no"
-    image = "SPL"
-    offset = 1K
-  }
-
-  partition u-boot {
-    in-partition-table = "no"
-    image = "u-boot.img"
-    offset = 69K
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-    offset = 1M
-    size = 512M
-  }
-}

board/udoo/neo/post-build.sh

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -d -m 755 $TARGET_DIR/boot
-$HOST_DIR/bin/mkimage -A arm -O linux -T script -C none  \
-	-n "boot script" -d $BOARD_DIR/boot.scr.txt $TARGET_DIR/boot/boot.scr

board/udoo/neo/post-image.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-  --rootpath "${TARGET_DIR}" \
-  --tmppath "${GENIMAGE_TMP}" \
-  --inputpath "${BINARIES_DIR}" \
-  --outputpath "${BINARIES_DIR}" \
-  --config "${GENIMAGE_CFG}"
-

board/udoo/neo/readme.txt

@@ -13,4 +13,4 @@ directory, ready to be dumped on an SD card:
 dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
 
 For details about the medium image layout, see the definition in
-board/udoo/neo/genimage.cfg.
+board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl.