PrusaSlicer

🍪/3D_Printer/PrusaSlicer/filament/Syntech, PLA BLACK.ini

@@ -0,0 +1,86 @@
+# generated by PrusaSlicer 2.9.4 on 2025-12-06 at 22:01:57 UTC
+bed_temperature = 50
+bridge_fan_speed = 100
+chamber_minimal_temperature = 0
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+cooling_perimeter_transition_distance = 0
+cooling_slowdown_logic = uniform_cooling
+custom_parameters_filament = ""
+disable_fan_first_layers = 3
+enable_dynamic_fan_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.97
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_abrasive = 0
+filament_colour = #3D3846
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_infill_max_crossing_speed = 0
+filament_infill_max_speed = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_purge_multiplier = 100%
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 5
+filament_retract_length_toolchange = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_retract_speed = 40
+filament_seam_gap_distance = nil
+filament_settings_id = ""
+filament_shrinkage_compensation_xy = 0%
+filament_shrinkage_compensation_z = 0%
+filament_soluble = 0
+filament_spool_weight = 0
+filament_stamping_distance = 0
+filament_stamping_loading_speed = 20
+filament_toolchange_delay = 0
+filament_travel_lift_before_obstacle = nil
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Syntech
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 195
+full_fan_speed_layer = 0
+idle_temperature = nil
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 195