PrusaSlicer

🍪/3D_Printer/PrusaSlicer/print/Speed 60mm.ini

@@ -0,0 +1,198 @@
+# generated by PrusaSlicer 2.9.4 on 2025-12-27 at 02:37:44 UTC
+arc_fitting = disabled
+automatic_extrusion_widths = 0
+automatic_infill_combination = 0
+automatic_infill_combination_max_layer_height = 100%
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bed_temperature_extruder = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+custom_parameters_print = 
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 1
+ensure_vertical_shell_thickness = enabled
+external_perimeter_acceleration = 0
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_infill_speed = 0
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = disabled
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+interlocking_beam = 0
+interlocking_beam_layer_count = 2
+interlocking_beam_width = 0.8
+interlocking_boundary_avoidance = 2
+interlocking_depth = 2
+interlocking_orientation = 22.5
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 0
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_one_perimeter_first_layer = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+over_bridge_speed = 0
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_generator = arachne
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 50%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+scarf_seam_entire_loop = 0
+scarf_seam_length = 20
+scarf_seam_max_segment_length = 1
+scarf_seam_on_inner_perimeters = 0
+scarf_seam_only_on_smooth = 1
+scarf_seam_placement = nowhere
+scarf_seam_start_height = 0%
+seam_gap_distance = 15%
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 15
+solid_infill_acceleration = 0
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 1
+support_material_interface_pattern = concentric
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear-grid
+support_material_spacing = 2
+support_material_speed = 80
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
+thick_bridges = 0
+thin_walls = 1
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0
+top_one_perimeter_type = none
+top_solid_infill_acceleration = 0
+top_solid_infill_speed = 15
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_acceleration = 0
+travel_short_distance_acceleration = 0
+travel_speed = 130
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_acceleration = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_flow = 100%
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_width = 60
+xy_size_compensation = 0