DHT-sensor-library/examples/DHTtester/DHTtester.ino

70 lines
2.2 KiB
Arduino
Raw Normal View History

2011-06-23 00:09:13 +04:00
// Example testing sketch for various DHT humidity/temperature sensors
// Written by ladyada, public domain
#include "DHT.h"
2015-10-13 07:09:17 +03:00
#define DHTPIN 2 // what digital pin we're connected to
2011-06-23 00:09:13 +04:00
// Uncomment whatever type you're using!
//#define DHTTYPE DHT11 // DHT 11
2015-10-13 07:09:17 +03:00
#define DHTTYPE DHT22 // DHT 22 (AM2302), AM2321
2011-06-23 00:09:13 +04:00
//#define DHTTYPE DHT21 // DHT 21 (AM2301)
// Connect pin 1 (on the left) of the sensor to +5V
// NOTE: If using a board with 3.3V logic like an Arduino Due connect pin 1
// to 3.3V instead of 5V!
2011-06-23 00:09:13 +04:00
// Connect pin 2 of the sensor to whatever your DHTPIN is
// Connect pin 4 (on the right) of the sensor to GROUND
2011-06-23 00:28:22 +04:00
// Connect a 10K resistor from pin 2 (data) to pin 1 (power) of the sensor
2011-06-23 00:09:13 +04:00
// Initialize DHT sensor.
// Note that older versions of this library took an optional third parameter to
// tweak the timings for faster processors. This parameter is no longer needed
// as the current DHT reading algorithm adjusts itself to work on faster procs.
2011-06-23 00:09:13 +04:00
DHT dht(DHTPIN, DHTTYPE);
void setup() {
Serial.begin(9600);
2011-06-23 00:09:13 +04:00
Serial.println("DHTxx test!");
2011-06-23 00:09:13 +04:00
dht.begin();
}
void loop() {
// Wait a few seconds between measurements.
delay(2000);
2011-06-23 00:09:13 +04:00
// Reading temperature or humidity takes about 250 milliseconds!
// Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
float h = dht.readHumidity();
// Read temperature as Celsius (the default)
2011-06-23 00:09:13 +04:00
float t = dht.readTemperature();
// Read temperature as Fahrenheit (isFahrenheit = true)
float f = dht.readTemperature(true);
// Check if any reads failed and exit early (to try again).
if (isnan(h) || isnan(t) || isnan(f)) {
Serial.println("Failed to read from DHT sensor!");
return;
}
// Compute heat index in Fahrenheit (the default)
float hif = dht.computeHeatIndex(f, h);
// Compute heat index in Celsius (isFahreheit = false)
float hic = dht.computeHeatIndex(t, h, false);
2011-06-23 00:09:13 +04:00
Serial.print("Humidity: ");
Serial.print(h);
Serial.print(" %\t");
Serial.print("Temperature: ");
Serial.print(t);
Serial.print(" *C ");
Serial.print(f);
Serial.print(" *F\t");
Serial.print("Heat index: ");
Serial.print(hic);
Serial.print(" *C ");
Serial.print(hif);
Serial.println(" *F");
2011-06-23 00:09:13 +04:00
}