DHT11/examples/ReadPlot/ReadPlot.ino

/**
 * DHT11 Sensor Reader for Arduino
 * This sketch reads temperature and humidity data from the DHT11 sensor and prints the values to the serial plotter.
 *
 * Author: Dhruba Saha
 * Version: 2.0.0
 * License: MIT
 */

// Include the DHT11 library for interfacing with the sensor.
#include <DHT11.h>

// Create an instance of the DHT11 class. The sensor is connected to digital I/O pin 2.
DHT11 dht11(2);

void setup()
{
    // Initialize serial communication to allow debugging and data readout.
    // Using a baud rate of 9600 bps.
    Serial.begin(9600);
}

void loop()
{
    // Attempt to read the temperature and humidity values from the DHT11 sensor.
    int temperature = dht11.readTemperature();
    int humidity = dht11.readHumidity();

    // Check the results of the readings.
    // If there are no errors, print the temperature and humidity values in CSV format.
    if (temperature != DHT11::ERROR_CHECKSUM && temperature != DHT11::ERROR_TIMEOUT && humidity != DHT11::ERROR_CHECKSUM && humidity != DHT11::ERROR_TIMEOUT)
    {
        Serial.print("Temperature:");
        Serial.print(temperature);
        Serial.print(",Humidity:");
        Serial.println(humidity);
    }

    // Wait for 1 seconds before the next reading.
    delay(1000);
}