USBasp/firmware/Makefile
Stefan Beller da7b6e47c7 Initial commit.
This includes the files as of
wget http://www.fischl.de/usbasp/usbasp.2011-05-28.tar.gz
tar -xf usbasp.2011.05-28.tar.gz
2012-05-19 16:27:27 +02:00

136 lines
4.6 KiB
Makefile
Executable File

#
# Makefile for usbasp
# 20061119 Thomas Fischl original
# 20061120 Hanns-Konrad Unger help: and TARGET=atmega48 added
#
# TARGET=atmega8 HFUSE=0xc9 LFUSE=0xef
# TARGET=atmega48 HFUSE=0xdd LFUSE=0xff
# TARGET=at90s2313
TARGET=atmega8
HFUSE=0xc9
LFUSE=0xef
# ISP=bsd PORT=/dev/parport0
# ISP=ponyser PORT=/dev/ttyS1
# ISP=stk500 PORT=/dev/ttyS1
# ISP=usbasp PORT=/dev/usb/ttyUSB0
# ISP=stk500v2 PORT=/dev/ttyUSB0
ISP=usbasp
PORT=/dev/usb/ttyUSB0
help:
@echo "Usage: make same as make help"
@echo " make help same as make"
@echo " make main.hex create main.hex"
@echo " make clean remove redundant data"
@echo " make disasm disasm main"
@echo " make flash upload main.hex into flash"
@echo " make fuses program fuses"
@echo " make avrdude test avrdude"
@echo "Current values:"
@echo " TARGET=${TARGET}"
@echo " LFUSE=${LFUSE}"
@echo " HFUSE=${HFUSE}"
@echo " CLOCK=12000000"
@echo " ISP=${ISP}"
@echo " PORT=${PORT}"
COMPILE = avr-gcc -Wall -O2 -Iusbdrv -I. -mmcu=$(TARGET) # -DDEBUG_LEVEL=2
OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o isp.o clock.o tpi.o main.o
.c.o:
$(COMPILE) -c $< -o $@
#-Wa,-ahlms=$<.lst
.S.o:
$(COMPILE) -x assembler-with-cpp -c $< -o $@
# "-x assembler-with-cpp" should not be necessary since this is the default
# file type for the .S (with capital S) extension. However, upper case
# characters are not always preserved on Windows. To ensure WinAVR
# compatibility define the file type manually.
.c.s:
$(COMPILE) -S $< -o $@
clean:
rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.bin *.o main.s usbdrv/*.o
# file targets:
main.bin: $(OBJECTS)
$(COMPILE) -o main.bin $(OBJECTS) -Wl,-Map,main.map
main.hex: main.bin
rm -f main.hex main.eep.hex
avr-objcopy -j .text -j .data -O ihex main.bin main.hex
# ./checksize main.bin
# do the checksize script as our last action to allow successful compilation
# on Windows with WinAVR where the Unix commands will fail.
disasm: main.bin
avr-objdump -d main.bin
cpp:
$(COMPILE) -E main.c
flash:
avrdude -c ${ISP} -p ${TARGET} -P ${PORT} -U flash:w:main.hex
fuses:
avrdude -c ${ISP} -p ${TARGET} -P ${PORT} -u -U hfuse:w:$(HFUSE):m -U lfuse:w:$(LFUSE):m
avrdude:
avrdude -c ${ISP} -p ${TARGET} -P ${PORT} -v
# Fuse atmega8 high byte HFUSE:
# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)
# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0
# | | | | | +-------- BOOTSZ1
# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
# | | | +-------------- CKOPT (full output swing)
# | | +---------------- SPIEN (allow serial programming)
# | +------------------ WDTON (WDT not always on)
# +-------------------- RSTDISBL (reset pin is enabled)
# Fuse atmega8 low byte LFUSE:
# 0x9f = 1 0 0 1 1 1 1 1
# ^ ^ \ / \--+--/
# | | | +------- CKSEL 3..0 (external >8M crystal)
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
# | +------------------ BODEN (BrownOut Detector enabled)
# +-------------------- BODLEVEL (2.7V)
#
# Fuse atmega48 high byte hfuse:
# 0xdf = 1 1 0 1 1 1 1 1 factory setting
# ^ ^ ^ ^ ^ \-+-/
# | | | | | +------ BODLEVEL (Brown out disabled)
# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
# | | | +-------------- WDTON (WDT not always on)
# | | +---------------- SPIEN (allow serial programming)
# | +------------------ DWEN (debug wire is disabled)
# +-------------------- RSTDISBL (reset pin is enabled)
# 0xdd = ext.reset, no DW, SPI, no watchdog, no save eeprom, BOD 2.7V
# Fuse atmega48 low byte lfuse:
# 0x62 = 0 1 1 0 0 0 1 0 factory setting
# ^ ^ \ / \--+--/
# | | | +------- CKSEL 3..0 (internal 8Mhz Oszillator)
# | | +--------------- SUT 1..0 (start-up time)
# | +------------------ CKOUT (no clock output)
# +-------------------- CKDIV8 (divide clock by 8)
# 0xdc = divide/1,no clock output,fast raising power,low Pw Oszil. 3..8 Mhz
# 0xe0 = divide/1,no clock output,fast raising power,external Oszil.
# 0xff = divide/1,no clock output,slow raising power,low Pw Oszil 8.. Mhz
SERIAL = `echo /dev/tty.USA19QI*`
UISP = uisp -dprog=$S -dserial=$(SERIAL) -dpart=auto
# The two lines above are for "uisp" and the AVR910 serial programmer connected
# to a Keyspan USB to serial converter to a Mac running Mac OS X.
# Choose your favorite programmer and interface.
uisp: all
$(UISP) --erase
$(UISP) --upload --verify if=main.hex