mirror/cwm
1
0
Fork 0
mirror of https://github.com/leahneukirchen/cwm.git synced 2023-08-10 21:13:12 +03:00
Code Issues Projects Releases Wiki Activity
750 Commits 4 Branches 18 Tags 2.3 MiB
cb60a4b917
Commit Graph

750 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
okan
6c835fd585 Remove unnecessary memset since reload was replaced with restart; 
from Kent Spillner.
 2014-08-19 18:39:41 +00:00
okan
01cca3c114 Pull highstack from group_ctx (and useless calculations of); in the one 
place that we use highstack, replace that usage with a local variable
(for now until stacking is done properly).
 2014-08-19 12:47:51 +00:00
okan
1192007171 Get rid of nhidden in group_ctx; it actually never reported correctly 
since nhidden wasn't incremented nor decremeted in all the right places,
thus confusing matters.  We don't need to carry a count around, so just
use a local variable in the one place we need one to supply
XRestackWindows().
 2014-08-18 13:57:57 +00:00
okan
e9cb5b743f plug memleak (currently unused func); from Tiago Cunha 2014-04-21 12:52:14 +00:00
okan
d46b0f8848 Alignment fix; found the hard way on sparc64 by landry@ (and thanks too 
for fast access to a box!)

ok deraadt@, matthieu@
 2014-02-27 00:52:57 +00:00
okan
6798e3dde3 Make sure we cycle through existing client's group membership and set 
the hidden state on the group; important to know group hidden state
after a re-exec or restart of cwm (as easily seen in group menu).
 2014-02-08 02:49:30 +00:00
okan
1208225fbd Replace a few hand rolled loops with like tailq loops. 2014-02-08 02:40:43 +00:00
okan
2a87320bbf all mapped clients now should have a group, so simplify some cases 2014-02-07 21:59:56 +00:00
okan
3cb81ebeea If _NET_WM_DESKTOP is set to -1 during client creation, place the client into 
group 0 (nogroup); solves problem initially discovered by oga@nicotinebsd with
tint2.  A clientmessage *after* client creation already handles this case.

Go further and assign every client to a group; in non-sticky mode, group 0
(nogroup) and sticky mode, the active group.  In both cases, autogroup will
override the group assignment.  Removing a group from a client always places
the client back into group 0 (nogroup).  Autogroup can also assign a client to
group 0 (nogroup) to keep a client always visible (unless of course one opts to
hide all clients).
 2014-02-07 18:09:54 +00:00
okan
98d8483d35 Some clients set the urgency flag even if they are the active client; 
prevent annoying behavior by only setting the cwm urgency flag if the client
is not active; diff from Thomas Adam.
 2014-02-06 20:58:46 +00:00
okan
f793964c9e Introduce a region queue and replace screen's XineramaScreenInfo; we 
still use Xinerama to populate the regions per screen, but will switch
at a more appropriate time.
 2014-02-03 21:07:47 +00:00
okan
8a6dd51fac make this XQueryTree like the other 2014-02-03 20:29:05 +00:00
okan
ad96c16838 Move redundant bits from screen_init (while dealing with existing 
clients) directly into client_init, performing the X roundtrip only
once. With the previous change in maprequest, this moves decision making
into one place for creating new clients.
 2014-02-03 20:20:39 +00:00
okan
ad76995af7 Move redundant window attr fetch from maprequest directly into 
client_init and perform that X roundtrip only once.
 2014-02-02 21:34:05 +00:00
okan
ad1b78c6d1 No need to store screen colormap and visual; rather just use the X 
macros in the one place they are needed.
 2014-02-02 16:29:04 +00:00
okan
5f9c7a21c7 Unlike free(3), XFree(3) can't be passed a NULL pointer. 2014-02-02 16:13:50 +00:00
okan
0a71742af4 The menu already limits entries with MENU_MAXENTRY, so don't bother 
holding a command name limit as well.
 2014-02-02 15:46:05 +00:00
okan
fd827fd757 Take menu's bwidth into account for position/size; reported by Thomas Adam. 2014-02-01 19:28:46 +00:00
okan
8b63ac62c2 Let the config parser continue parsing even after encountering an error; 
original idea (with now-outdated patch) from Thomas Adam.  Since we now
report where errors exist, this now makes more sense.  Expand a bit on
config file parsing in the cwm(1).

Discussed with a few, including sthen; ok sthen.
 2014-02-01 00:25:04 +00:00
okan
34477b8a35 re-add lost free from previous 2014-01-30 22:41:16 +00:00
okan
cc1902f57c Switch ignoreq to winname struct since it's basically the same thing; 
removes limit on name matching.
 2014-01-30 22:17:22 +00:00
okan
7928c1ad7c use the same autogroupwin variable as everywhere else 2014-01-30 15:43:53 +00:00
okan
fdefcecfa0 Move cwm_status around to avoid header fu, and remove extraneous signal 
header from xevents.c; noticed by Christian Neukirchen.
 2014-01-30 15:41:11 +00:00
okan
7b5b7cc9e9 Remove duplicate mouse functions and instead use the kbfunc ones. No 
user visable changes at this point, but they'll merge at an appropriate
time.
 2014-01-30 14:40:21 +00:00
okan
2be890489b Minimize trivial differences between a few kb and mb functions. 2014-01-29 22:30:00 +00:00
okan
59fe14bd2f keybinding -> key binding 2014-01-29 21:17:33 +00:00
okan
db0b2fde5c Merge keybinding and mousebinding queues into using the same merged 
struct, binding; they were essentially the same accept for what was
'pressed', keysym or button.
 2014-01-29 21:13:52 +00:00
okan
4438970b64 Much like we do for keyboard and mouse bindings, remove duplicates for 
command name - last match.
 2014-01-29 18:43:27 +00:00
okan
1f8f19b4d5 Check command name/path for truncation and provide user feedback during 
config parse (and use conf_cmd_add to populate defaults); based on a
discussion with Tiago Cunha.  While this looks ugly, there are likely
some other changes here to come.
 2014-01-29 18:34:22 +00:00
okan
c28467cda5 Check ignore windowname for truncation and provide user feedback during 
config parse; based on a discussion with Tiago Cunha.
 2014-01-28 20:22:21 +00:00
okan
df15337a9f The EWMH spec states that if the cardinal returned is 0xFFFFFFFF (-1) 
then the window should appear on all desktops, which in our case is
assigned to group 0.  Found to fix stalonetray due to the non-ewmh aware
range checking in group_movetogroup(); from Thomas Adam.
 2014-01-28 13:40:40 +00:00
okan
51b3fbee52 Move conf_init/clear into main - no behaviour change; from Tiago Cunha. 2014-01-28 00:42:20 +00:00
okan
0608610cc7 move some init up and shed some blank lines 2014-01-27 15:13:09 +00:00
okan
469db5f371 simplify parse_config using assignment; inspired by a very old diff from 
Tiago Cunha.
 2014-01-27 14:49:40 +00:00
okan
6f10349843 more range checking 2014-01-24 22:38:02 +00:00
okan
c7e2ee5dd5 correct arguments and drop the cast. 
sanity check by oga@nicotinebsd
 2014-01-24 15:08:06 +00:00
okan
53e77acafc no need to quote within warning 2014-01-23 17:13:38 +00:00
okan
79248a385b If no title is supplied, term uses only the basename for its title. 
This is useless when searching for windows launched via the ssh command
menu; supply a more useful title: '[ssh] <hostname>'.

Idea from todd@, ok todd@
 2014-01-23 16:51:28 +00:00
okan
3d2eec293a zap whitespace 2014-01-22 22:41:09 +00:00
okan
978a5767ec cwm_argv doesn't need to be global any longer 2014-01-22 22:26:05 +00:00
okan
5121ea5e10 start properly releasing X resources during teardown 2014-01-22 22:14:02 +00:00
okan
77aa5ac45b Somewhat streamline event loop/restart/quit handling; most notable 
change allows a restart to trigger proper teardown first, even though
teardown is not (yet) complete.

After some discussion with oga@nicotinebsd.org regarding a more
complicated version/idea.
 2014-01-22 21:48:27 +00:00
okan
ac3162439a Sprinkle a few more const; from Tiago Cunha. 2014-01-21 15:42:44 +00:00
okan
83f9ef884a Save the ptr position before lowering via kbd, so as to be able to cycle 
back with the pointer in the right place; matches behaviour when
lowering via the mouse function.
 2014-01-20 23:18:47 +00:00
okan
c7adadaf9d merge KBFLAG_NEEDCLIENT and MOUSEBIND_CTX_*; brings kbfunc and mousefunc 
bits even closer.
 2014-01-20 23:03:51 +00:00
okan
34f43e3f2d Use argument to pass down flags for mousefunc cyclegroup; removes 
rcyclegroup wrapper need - now similar to kbfunc.
 2014-01-20 22:31:53 +00:00
okan
d91571c567 constify and rename some confusing variables around cmdq. 2014-01-20 21:34:32 +00:00
okan
7263fb4c84 - remove redundant range check for buttons in conf_bind_mouse. 
- make conf_bind_kbd return error on non-matches to match what
   conf_bind_mouse does.
 - rename some variables while here for clarity.
 - constify bind and cmd.

from Tiago Cunha.
 2014-01-20 19:06:04 +00:00
okan
720b5452aa Add a function that adds an entry to a menuq, normalizing a common code 
path; from Tiago Cunha.
 2014-01-20 18:58:03 +00:00
okan
43ccf4eae0 use consistent types 2014-01-03 15:29:06 +00:00