diff --git a/libserialport.h.in b/libserialport.h.in index 2dab6a9..6aa5f6f 100644 --- a/libserialport.h.in +++ b/libserialport.h.in @@ -232,26 +232,7 @@ enum sp_signal { struct sp_port; /** Configuration for a serial port. */ -struct sp_port_config { - /** Baud rate in bits per second. */ - int baudrate; - /** Number of data bits to use. Valid values are 5 to 8. */ - int bits; - /** Parity setting to use. */ - enum sp_parity parity; - /** Number of stop bits to use (1 or 2). */ - int stopbits; - /** RTS pin mode. */ - enum sp_rts rts; - /** CTS pin mode. */ - enum sp_cts cts; - /** DTR pin mode. */ - enum sp_dtr dtr; - /** DSR pin mode. */ - enum sp_dsr dsr; - /** XON/XOFF flow control mode. */ - enum sp_xonxoff xon_xoff; -}; +struct sp_port_config; /** @defgroup Enumeration Port enumeration @@ -387,15 +368,42 @@ enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr); * @{ */ +/** + * Allocate a port configuration structure. + * + * The user should allocate a variable of type "struct sp_config *" and pass a + * pointer to this to receive the result. The variable will be updated to + * point to the new configuration structure. The structure is opaque and must + * be accessed via the functions provided. + * + * All parameters in the structure will be initialised to special values which + * are ignored by sp_set_config(). + * + * The structure should be freed after use by calling sp_free_config(). + * + * @param config_ptr Pointer to variable to receive result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_new_config(struct sp_port_config **config_ptr); + +/** + * Free a port configuration structure. + * + * @param config Pointer to configuration structure. + */ +void sp_free_config(struct sp_port_config *config); + /** * Get the current configuration of the specified serial port. * - * The user should allocate a struct sp_port_config, then pass a pointer to it - * as the config parameter. The struct will be populated with the port - * configuration. + * The user should allocate a configuration structure using sp_new_config() + * and pass this as the config parameter. The configuration structure will + * be updated with the port configuration. * - * Any setting that is in a state not recognised or supported by - * libserialport will have its value set to -1 in the struct. + * Any parameters that are configured with settings not recognised or + * supported by libserialport, will be set to special values that are + * ignored by sp_set_config(). * * @return SP_OK upon success, a negative error code otherwise. */ @@ -404,10 +412,9 @@ enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config /** * Set the configuration for the specified serial port. * - * The user should populate a struct sp_port_config, then pass a pointer to it - * as the config parameter. - * - * To retain the current value of any setting, set that field to -1. + * For each parameter in the configuration, there is a special value (usually + * -1, but see the documentation for each field). These values will be ignored + * and the corresponding setting left unchanged on the port. * * @return SP_OK upon success, a negative error code otherwise. */ @@ -424,52 +431,129 @@ enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config * enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate); /** - * Set the number of data bits for the specified serial port. + * Get the baud rate from a port configuration. + * + * The user should allocate a variable of type int and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param baudrate_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr); + +/** + * Set the baud rate in a port configuration. + * + * @param config Pointer to configuration structure. + * @param baudrate Baud rate in bits per second, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate); + +/** + * Set the data bits for the specified serial port. * * @param port Pointer to port structure. - * @param bits Number of data bits to use. Valid values are 5 to 8. + * @param bits Number of data bits. * * @return SP_OK upon success, a negative error code otherwise. */ enum sp_return sp_set_bits(struct sp_port *port, int bits); /** - * Set the parity for the specified serial port. + * Get the data bits from a port configuration. + * + * The user should allocate a variable of type int and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param bits_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr); + +/** + * Set the data bits in a port configuration. + * + * @param config Pointer to configuration structure. + * @param bits Number of data bits, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits); + +/** + * Set the parity setting for the specified serial port. * * @param port Pointer to port structure. - * @param parity Parity setting to use. + * @param parity Parity setting. * * @return SP_OK upon success, a negative error code otherwise. */ enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity); /** - * Set the number of stop bits for the specified port. + * Get the parity setting from a port configuration. + * + * The user should allocate a variable of type enum sp_parity and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param parity_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr); + +/** + * Set the parity setting in a port configuration. + * + * @param config Pointer to configuration structure. + * @param parity Parity setting, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity); + +/** + * Set the stop bits for the specified serial port. * * @param port Pointer to port structure. - * @param stopbits Number of stop bits to use (1 or 2). + * @param stopbits Number of stop bits. * * @return SP_OK upon success, a negative error code otherwise. */ enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits); /** - * Set the flow control type for the specified serial port. + * Get the stop bits from a port configuration. * - * This function is a wrapper that sets the RTS, CTS, DTR, DSR and - * XON/XOFF settings as necessary for the specified flow control - * type. For more fine-grained control of these settings, use their - * individual configuration functions or the sp_set_config() function. + * The user should allocate a variable of type int and pass a pointer to this + * to receive the result. * - * @param port Pointer to port structure. - * @param flowcontrol Flow control setting to use. + * @param config Pointer to configuration structure. + * @param stopbits_ptr Pointer to variable to store result. * * @return SP_OK upon success, a negative error code otherwise. */ -enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol); +enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr); /** - * Set the RTS pin behaviour for the specified port. + * Set the stop bits in a port configuration. + * + * @param config Pointer to configuration structure. + * @param stopbits Number of stop bits, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits); + +/** + * Set the RTS pin behaviour for the specified serial port. * * @param port Pointer to port structure. * @param rts RTS pin mode. @@ -479,7 +563,30 @@ enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flow enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); /** - * Set the CTS pin behaviour for the specified port. + * Get the RTS pin behaviour from a port configuration. + * + * The user should allocate a variable of type enum sp_rts and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param rts_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr); + +/** + * Set the RTS pin behaviour in a port configuration. + * + * @param config Pointer to configuration structure. + * @param rts RTS pin mode, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts); + +/** + * Set the CTS pin behaviour for the specified serial port. * * @param port Pointer to port structure. * @param cts CTS pin mode. @@ -489,7 +596,30 @@ enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); /** - * Set the DTR pin behaviour for the specified port. + * Get the CTS pin behaviour from a port configuration. + * + * The user should allocate a variable of type enum sp_cts and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param cts_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr); + +/** + * Set the CTS pin behaviour in a port configuration. + * + * @param config Pointer to configuration structure. + * @param cts CTS pin mode, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts); + +/** + * Set the DTR pin behaviour for the specified serial port. * * @param port Pointer to port structure. * @param dtr DTR pin mode. @@ -499,7 +629,30 @@ enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); /** - * Set the RTS pin behaviour for the specified port. + * Get the DTR pin behaviour from a port configuration. + * + * The user should allocate a variable of type enum sp_dtr and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param dtr_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr); + +/** + * Set the DTR pin behaviour in a port configuration. + * + * @param config Pointer to configuration structure. + * @param dtr DTR pin mode, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr); + +/** + * Set the DSR pin behaviour for the specified serial port. * * @param port Pointer to port structure. * @param dsr DSR pin mode. @@ -509,15 +662,91 @@ enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr); /** - * Configure XON/XOFF flow control for the specified port. + * Get the DSR pin behaviour from a port configuration. + * + * The user should allocate a variable of type enum sp_dsr and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param dsr_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr); + +/** + * Set the DSR pin behaviour in a port configuration. + * + * @param config Pointer to configuration structure. + * @param dsr DSR pin mode, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr); + +/** + * Set the XON/XOFF configuration for the specified serial port. * * @param port Pointer to port structure. - * @param xon_xoff XON/XOFF flow control mode. + * @param xon_xoff XON/XOFF mode. * * @return SP_OK upon success, a negative error code otherwise. */ enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff); +/** + * Get the XON/XOFF configuration from a port configuration. + * + * The user should allocate a variable of type enum sp_xonxoff and pass a pointer to this + * to receive the result. + * + * @param config Pointer to configuration structure. + * @param xon_xoff_ptr Pointer to variable to store result. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr); + +/** + * Set the XON/XOFF configuration in a port configuration. + * + * @param config Pointer to configuration structure. + * @param xon_xoff XON/XOFF mode, or -1 to retain current setting. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff); + +/** + * Set the flow control type in a port configuration. + * + * This function is a wrapper that sets the RTS, CTS, DTR, DSR and + * XON/XOFF settings as necessary for the specified flow control + * type. For more fine-grained control of these settings, use their + * individual configuration functions. + * + * @param config Pointer to configuration structure. + * @param flowcontrol Flow control setting to use. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol); + +/** + * Set the flow control type for the specified serial port. + * + * This function is a wrapper that sets the RTS, CTS, DTR, DSR and + * XON/XOFF settings as necessary for the specified flow control + * type. For more fine-grained control of these settings, use their + * individual configuration functions. + * + * @param port Pointer to port structure. + * @param flowcontrol Flow control setting to use. + * + * @return SP_OK upon success, a negative error code otherwise. + */ +enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol); + /** * @} * @defgroup Data Reading, writing, and flushing data diff --git a/serialport.c b/serialport.c index 739a6ed..f426fca 100644 --- a/serialport.c +++ b/serialport.c @@ -67,6 +67,18 @@ struct sp_port { #endif }; +struct sp_port_config { + int baudrate; + int bits; + enum sp_parity parity; + int stopbits; + enum sp_rts rts; + enum sp_cts cts; + enum sp_dtr dtr; + enum sp_dsr dsr; + enum sp_xonxoff xon_xoff; +}; + struct port_data { #ifdef _WIN32 DCB dcb; @@ -1452,6 +1464,31 @@ static enum sp_return set_config(struct sp_port *port, struct port_data *data, RETURN_OK(); } +enum sp_return sp_new_config(struct sp_port_config **config_ptr) +{ + TRACE("%p", config_ptr); + + if (!config_ptr) + RETURN_ERROR(SP_ERR_ARG, "Null result pointer"); + + if (!(*config_ptr = malloc(sizeof(struct sp_port_config)))) + RETURN_ERROR(SP_ERR_MEM, "config malloc failed"); + + RETURN_OK(); +} + +void sp_free_config(struct sp_port_config *config) +{ + TRACE("%p", config); + + if (!config) + DEBUG("Null config"); + else + free(config); + + RETURN(); +} + enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config) { struct port_data data; @@ -1461,7 +1498,7 @@ enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config CHECK_OPEN_PORT(); if (!config) - RETURN_ERROR(SP_ERR_ARG, "Null result pointer"); + RETURN_ERROR(SP_ERR_ARG, "Null config"); TRY(get_config(port, &data, config)); @@ -1486,7 +1523,8 @@ enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config * RETURN_OK(); } -#define CREATE_SETTER(x, type) int sp_set_##x(struct sp_port *port, type x) { \ +#define CREATE_ACCESSORS(x, type) \ +enum sp_return sp_set_##x(struct sp_port *port, type x) { \ struct port_data data; \ struct sp_port_config config; \ TRACE("%p, %d", port, x); \ @@ -1495,17 +1533,65 @@ enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config * config.x = x; \ TRY(set_config(port, &data, &config)); \ RETURN_OK(); \ +} \ +enum sp_return sp_get_config_##x(const struct sp_port_config *config, type *x) { \ + TRACE("%p", config); \ + if (!config) \ + RETURN_ERROR(SP_ERR_ARG, "Null config"); \ + *x = config->x; \ + RETURN_OK(); \ +} \ +enum sp_return sp_set_config_##x(struct sp_port_config *config, type x) { \ + TRACE("%p, %d", config, x); \ + if (!config) \ + RETURN_ERROR(SP_ERR_ARG, "Null config"); \ + config->x = x; \ + RETURN_OK(); \ } -CREATE_SETTER(baudrate, int) -CREATE_SETTER(bits, int) -CREATE_SETTER(parity, enum sp_parity) -CREATE_SETTER(stopbits, int) -CREATE_SETTER(rts, enum sp_rts) -CREATE_SETTER(cts, enum sp_cts) -CREATE_SETTER(dtr, enum sp_dtr) -CREATE_SETTER(dsr, enum sp_dsr) -CREATE_SETTER(xon_xoff, enum sp_xonxoff) +CREATE_ACCESSORS(baudrate, int) +CREATE_ACCESSORS(bits, int) +CREATE_ACCESSORS(parity, enum sp_parity) +CREATE_ACCESSORS(stopbits, int) +CREATE_ACCESSORS(rts, enum sp_rts) +CREATE_ACCESSORS(cts, enum sp_cts) +CREATE_ACCESSORS(dtr, enum sp_dtr) +CREATE_ACCESSORS(dsr, enum sp_dsr) +CREATE_ACCESSORS(xon_xoff, enum sp_xonxoff) + +enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol) +{ + if (!config) + RETURN_ERROR(SP_ERR_ARG, "Null configuration"); + + if (flowcontrol > SP_FLOWCONTROL_DTRDSR) + RETURN_ERROR(SP_ERR_ARG, "Invalid flow control setting"); + + if (flowcontrol == SP_FLOWCONTROL_XONXOFF) + config->xon_xoff = SP_XONXOFF_INOUT; + else + config->xon_xoff = SP_XONXOFF_DISABLED; + + if (flowcontrol == SP_FLOWCONTROL_RTSCTS) { + config->rts = SP_RTS_FLOW_CONTROL; + config->cts = SP_CTS_FLOW_CONTROL; + } else { + if (config->rts == SP_RTS_FLOW_CONTROL) + config->rts = SP_RTS_ON; + config->cts = SP_CTS_IGNORE; + } + + if (flowcontrol == SP_FLOWCONTROL_DTRDSR) { + config->dtr = SP_DTR_FLOW_CONTROL; + config->dsr = SP_DSR_FLOW_CONTROL; + } else { + if (config->dtr == SP_DTR_FLOW_CONTROL) + config->dtr = SP_DTR_ON; + config->dsr = SP_DSR_IGNORE; + } + + RETURN_OK(); +} enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol) { @@ -1516,33 +1602,9 @@ enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flow CHECK_OPEN_PORT(); - if (flowcontrol > SP_FLOWCONTROL_DTRDSR) - RETURN_ERROR(SP_ERR_ARG, "Invalid flow control setting"); - TRY(get_config(port, &data, &config)); - if (flowcontrol == SP_FLOWCONTROL_XONXOFF) - config.xon_xoff = SP_XONXOFF_INOUT; - else - config.xon_xoff = SP_XONXOFF_DISABLED; - - if (flowcontrol == SP_FLOWCONTROL_RTSCTS) { - config.rts = SP_RTS_FLOW_CONTROL; - config.cts = SP_CTS_FLOW_CONTROL; - } else { - if (config.rts == SP_RTS_FLOW_CONTROL) - config.rts = SP_RTS_ON; - config.cts = SP_CTS_IGNORE; - } - - if (flowcontrol == SP_FLOWCONTROL_DTRDSR) { - config.dtr = SP_DTR_FLOW_CONTROL; - config.dsr = SP_DSR_FLOW_CONTROL; - } else { - if (config.dtr == SP_DTR_FLOW_CONTROL) - config.dtr = SP_DTR_ON; - config.dsr = SP_DSR_IGNORE; - } + TRY(sp_set_config_flowcontrol(&config, flowcontrol)); TRY(set_config(port, &data, &config));