1
0
mirror of git://sigrok.org/libserialport synced 2023-08-10 21:13:24 +03:00
libserialport/libserialport.h.in
Uwe Hermann 44df415480 Doxygen: Fix an issue causing missing #define documentation output.
Searching for documented defines...
  [...]libserialport.h:1624: warning: documentation for unknown define SP_PACKAGE_VERSION_MAJOR found.
  [...]libserialport.h:1627: warning: documentation for unknown define SP_PACKAGE_VERSION_MINOR found.
  [...]libserialport.h:1630: warning: documentation for unknown define SP_PACKAGE_VERSION_MICRO found.
  [...]libserialport.h:1633: warning: documentation for unknown define SP_PACKAGE_VERSION_STRING found.
  [...]libserialport.h:1640: warning: documentation for unknown define SP_LIB_VERSION_CURRENT found.
  [...]libserialport.h:1643: warning: documentation for unknown define SP_LIB_VERSION_REVISION found.
  [...]libserialport.h:1646: warning: documentation for unknown define SP_LIB_VERSION_AGE found.
  [...]libserialport.h:1649: warning: documentation for unknown define SP_LIB_VERSION_STRING found.
2020-01-05 18:19:32 +01:00

1738 lines
57 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* This file is part of the libserialport project.
*
* Copyright (C) 2013, 2015 Martin Ling <martin-libserialport@earth.li>
* Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2014 Aurelien Jacobs <aurel@gnuage.org>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @mainpage libserialport API
*
* Introduction
* ============
*
* libserialport is a minimal library written in C that is intended to take
* care of the OS-specific details when writing software that uses serial ports.
*
* By writing your serial code to use libserialport, you enable it to work
* transparently on any platform supported by the library.
*
* libserialport is an open source project released under the LGPL3+ license.
*
* The library is maintained by the [sigrok](http://sigrok.org/) project. See
* the [libserialport homepage](http://sigrok.org/wiki/Libserialport) for the
* latest information.
*
* Source code is maintained in git at
* [git://sigrok.org/libserialport](http://sigrok.org/gitweb/?p=libserialport.git).
*
* Bugs are tracked at http://sigrok.org/bugzilla/.
*
* The library was conceived and designed by Martin Ling, is maintained by
* Uwe Hermann, and has received contributions from several other developers.
* See the git history for full credits.
*
* API information
* ===============
*
* The API has been designed from scratch. It does not exactly resemble the
* serial API of any particular operating system. Instead it aims to provide
* a set of functions that can reliably be implemented across all operating
* systems. These form a sufficient basis for higher level behaviour to
* be implemented in a platform independent manner.
*
* If you are porting code written for a particular OS, you may find you need
* to restructure things somewhat, or do without some specialised features.
* For particular notes on porting existing code, see @ref Porting.
*
* Examples
* --------
*
* Some simple example programs using libserialport are included in the
* @c examples directory in the source package:
*
* - @ref list_ports.c - Getting a list of ports present on the system.
* - @ref port_info.c - Getting information on a particular serial port.
*
* These examples are linked with the API documentation. Each function
* in the API reference includes links to where it is used in an example
* program, and each appearance of a function in the examples links
* to that function's entry in the API reference.
*
* Headers
* -------
*
* To use libserialport functions in your code, you should include the
* libserialport.h header, i.e.
* @code
* #include <libserialport.h>
* @endcode
*
* Namespace
* ---------
*
* All identifiers defined by the public libserialport headers use the prefix
* @c sp_ (for functions and data types) or @c SP_ (for macros and constants).
*
* Functions
* ---------
*
* The functions provided by the library are documented in detail in
* the following sections:
*
* - @ref Enumeration (obtaining a list of serial ports on the system)
* - @ref Ports (opening, closing and getting information about ports)
* - @ref Configuration (baud rate, parity, etc.)
* - @ref Signals (modem control lines, breaks, etc.)
* - @ref Data (reading and writing data, and buffer management)
* - @ref Waiting (waiting for ports to be ready, integrating with event loops)
* - @ref Errors (getting error and debugging information)
*
* Data structures
* ---------------
*
* The library defines three data structures:
*
* - @ref sp_port, which represents a serial port.
* See @ref Enumeration.
* - @ref sp_port_config, which represents a port configuration.
* See @ref Configuration.
* - @ref sp_event_set, which represents a set of events.
* See @ref Waiting.
*
* All these structures are allocated and freed by library functions. It is
* the caller's responsibility to ensure that the correct calls are made to
* free allocated structures after use.
*
* Return codes and error handling
* -------------------------------
*
* Most functions have return type @ref sp_return and can return only four
* possible error values:
*
* - @ref SP_ERR_ARG means that a function was called with invalid
* arguments. This implies a bug in the caller. The arguments passed would
* be invalid regardless of the underlying OS or serial device involved.
*
* - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or
* message provided by the OS can be obtained by calling sp_last_error_code()
* or sp_last_error_message().
*
* - @ref SP_ERR_SUPP indicates that there is no support for the requested
* operation in the current OS, driver or device. No error message is
* available from the OS in this case. There is either no way to request
* the operation in the first place, or libserialport does not know how to
* do so in the current version.
*
* - @ref SP_ERR_MEM indicates that a memory allocation failed.
*
* All of these error values are negative.
*
* Calls that succeed return @ref SP_OK, which is equal to zero. Some functions
* declared @ref sp_return can also return a positive value for a successful
* numeric result, e.g. sp_blocking_read() or sp_blocking_write().
*
* An error message is only available via sp_last_error_message() in the case
* where @ref SP_ERR_FAIL was returned by the previous function call. The error
* message returned is that provided by the OS, using the current language
* settings. It is an error to call sp_last_error_code() or
* sp_last_error_message() except after a previous function call returned
* @ref SP_ERR_FAIL. The library does not define its own error codes or
* messages to accompany other return codes.
*
* Thread safety
* -------------
*
* Certain combinations of calls can be made concurrently, as follows.
*
* - Calls using different ports may always be made concurrently, i.e.
* it is safe for separate threads to handle their own ports.
*
* - Calls using the same port may be made concurrently when one call
* is a read operation and one call is a write operation, i.e. it is safe
* to use separate "reader" and "writer" threads for the same port. See
* below for which operations meet these definitions.
*
* Read operations:
*
* - sp_blocking_read()
* - sp_blocking_read_next()
* - sp_nonblocking_read()
* - sp_input_waiting()
* - sp_flush() with @ref SP_BUF_INPUT only.
* - sp_wait() with @ref SP_EVENT_RX_READY only.
*
* Write operations:
*
* - sp_blocking_write()
* - sp_nonblocking_write()
* - sp_output_waiting()
* - sp_drain()
* - sp_flush() with @ref SP_BUF_OUTPUT only.
* - sp_wait() with @ref SP_EVENT_TX_READY only.
*
* If two calls, on the same port, do not fit into one of these categories
* each, then they may not be made concurrently.
*
* Debugging
* ---------
*
* The library can output extensive tracing and debugging information. The
* simplest way to use this is to set the environment variable
* @c LIBSERIALPORT_DEBUG to any value; messages will then be output to the
* standard error stream.
*
* This behaviour is implemented by a default debug message handling
* callback. An alternative callback can be set using sp_set_debug_handler(),
* in order to e.g. redirect the output elsewhere or filter it.
*
* No guarantees are made about the content of the debug output; it is chosen
* to suit the needs of the developers and may change between releases.
*
* @anchor Porting
* Porting
* -------
*
* The following guidelines may help when porting existing OS-specific code
* to use libserialport.
*
* ### Porting from Unix-like systems ###
*
* There are two main differences to note when porting code written for Unix.
*
* The first is that Unix traditionally provides a wide range of functionality
* for dealing with serial devices at the OS level; this is exposed through the
* termios API and dates to the days when serial terminals were common. If your
* code relies on many of these facilities you will need to adapt it, because
* libserialport provides only a raw binary channel with no special handling.
*
* The second relates to blocking versus non-blocking I/O behaviour. In
* Unix-like systems this is normally specified by setting the @c O_NONBLOCK
* flag on the file descriptor, affecting the semantics of subsequent @c read()
* and @c write() calls.
*
* In libserialport, blocking and nonblocking operations are both available at
* any time. If your existing code ѕets @c O_NONBLOCK, you should use
* sp_nonblocking_read() and sp_nonblocking_write() to get the same behaviour
* as your existing @c read() and @c write() calls. If it does not, you should
* use sp_blocking_read() and sp_blocking_write() instead. You may also find
* sp_blocking_read_next() useful, which reproduces the semantics of a blocking
* read() with @c VTIME=0 and @c VMIN=1 set in termios.
*
* Finally, you should take care if your program uses custom signal handlers.
* The blocking calls provided by libserialport will restart system calls that
* return with @c EINTR, so you will need to make your own arrangements if you
* need to interrupt blocking operations when your signal handlers are called.
* This is not an issue if you only use the default handlers.
*
* ### Porting from Windows ###
*
* The main consideration when porting from Windows is that there is no
* direct equivalent for overlapped I/O operations.
*
* If your program does not use overlapped I/O, you can simply use
* sp_blocking_read() and sp_blocking_write() as direct equivalents for
* @c ReadFile() and @c WriteFile(). You may also find sp_blocking_read_next()
* useful, which reproduces the special semantics of @c ReadFile() with
* @c ReadIntervalTimeout and @c ReadTotalTimeoutMultiplier set to @c MAXDWORD
* and @c ReadTotalTimeoutConstant set to between @c 1 and @c MAXDWORD-1 .
*
* If your program makes use of overlapped I/O to continue work while a serial
* operation is in progress, then you can achieve the same results using
* sp_nonblocking_read() and sp_nonblocking_write().
*
* Generally, overlapped I/O is combined with either waiting for completion
* once there is no more background work to do (using @c WaitForSingleObject()
* or @c WaitForMultipleObjects()), or periodically checking for completion
* with @c GetOverlappedResult(). If the aim is to start a new operation for
* further data once the previous one has completed, you can instead simply
* call the nonblocking functions again with the next data. If you need to
* wait for completion, use sp_wait() to determine when the port is ready to
* send or receive further data.
*/
#ifndef LIBSERIALPORT_LIBSERIALPORT_H
#define LIBSERIALPORT_LIBSERIALPORT_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stddef.h>
/** Return values. */
enum sp_return {
/** Operation completed successfully. */
SP_OK = 0,
/** Invalid arguments were passed to the function. */
SP_ERR_ARG = -1,
/** A system error occurred while executing the operation. */
SP_ERR_FAIL = -2,
/** A memory allocation failed while executing the operation. */
SP_ERR_MEM = -3,
/** The requested operation is not supported by this system or device. */
SP_ERR_SUPP = -4
};
/** Port access modes. */
enum sp_mode {
/** Open port for read access. */
SP_MODE_READ = 1,
/** Open port for write access. */
SP_MODE_WRITE = 2,
/** Open port for read and write access. @since 0.1.1 */
SP_MODE_READ_WRITE = 3
};
/** Port events. */
enum sp_event {
/** Data received and ready to read. */
SP_EVENT_RX_READY = 1,
/** Ready to transmit new data. */
SP_EVENT_TX_READY = 2,
/** Error occurred. */
SP_EVENT_ERROR = 4
};
/** Buffer selection. */
enum sp_buffer {
/** Input buffer. */
SP_BUF_INPUT = 1,
/** Output buffer. */
SP_BUF_OUTPUT = 2,
/** Both buffers. */
SP_BUF_BOTH = 3
};
/** Parity settings. */
enum sp_parity {
/** Special value to indicate setting should be left alone. */
SP_PARITY_INVALID = -1,
/** No parity. */
SP_PARITY_NONE = 0,
/** Odd parity. */
SP_PARITY_ODD = 1,
/** Even parity. */
SP_PARITY_EVEN = 2,
/** Mark parity. */
SP_PARITY_MARK = 3,
/** Space parity. */
SP_PARITY_SPACE = 4
};
/** RTS pin behaviour. */
enum sp_rts {
/** Special value to indicate setting should be left alone. */
SP_RTS_INVALID = -1,
/** RTS off. */
SP_RTS_OFF = 0,
/** RTS on. */
SP_RTS_ON = 1,
/** RTS used for flow control. */
SP_RTS_FLOW_CONTROL = 2
};
/** CTS pin behaviour. */
enum sp_cts {
/** Special value to indicate setting should be left alone. */
SP_CTS_INVALID = -1,
/** CTS ignored. */
SP_CTS_IGNORE = 0,
/** CTS used for flow control. */
SP_CTS_FLOW_CONTROL = 1
};
/** DTR pin behaviour. */
enum sp_dtr {
/** Special value to indicate setting should be left alone. */
SP_DTR_INVALID = -1,
/** DTR off. */
SP_DTR_OFF = 0,
/** DTR on. */
SP_DTR_ON = 1,
/** DTR used for flow control. */
SP_DTR_FLOW_CONTROL = 2
};
/** DSR pin behaviour. */
enum sp_dsr {
/** Special value to indicate setting should be left alone. */
SP_DSR_INVALID = -1,
/** DSR ignored. */
SP_DSR_IGNORE = 0,
/** DSR used for flow control. */
SP_DSR_FLOW_CONTROL = 1
};
/** XON/XOFF flow control behaviour. */
enum sp_xonxoff {
/** Special value to indicate setting should be left alone. */
SP_XONXOFF_INVALID = -1,
/** XON/XOFF disabled. */
SP_XONXOFF_DISABLED = 0,
/** XON/XOFF enabled for input only. */
SP_XONXOFF_IN = 1,
/** XON/XOFF enabled for output only. */
SP_XONXOFF_OUT = 2,
/** XON/XOFF enabled for input and output. */
SP_XONXOFF_INOUT = 3
};
/** Standard flow control combinations. */
enum sp_flowcontrol {
/** No flow control. */
SP_FLOWCONTROL_NONE = 0,
/** Software flow control using XON/XOFF characters. */
SP_FLOWCONTROL_XONXOFF = 1,
/** Hardware flow control using RTS/CTS signals. */
SP_FLOWCONTROL_RTSCTS = 2,
/** Hardware flow control using DTR/DSR signals. */
SP_FLOWCONTROL_DTRDSR = 3
};
/** Input signals. */
enum sp_signal {
/** Clear to send. */
SP_SIG_CTS = 1,
/** Data set ready. */
SP_SIG_DSR = 2,
/** Data carrier detect. */
SP_SIG_DCD = 4,
/** Ring indicator. */
SP_SIG_RI = 8
};
/**
* Transport types.
*
* @since 0.1.1
*/
enum sp_transport {
/** Native platform serial port. @since 0.1.1 */
SP_TRANSPORT_NATIVE,
/** USB serial port adapter. @since 0.1.1 */
SP_TRANSPORT_USB,
/** Bluetooth serial port adapter. @since 0.1.1 */
SP_TRANSPORT_BLUETOOTH
};
/**
* @struct sp_port
* An opaque structure representing a serial port.
*/
struct sp_port;
/**
* @struct sp_port_config
* An opaque structure representing the configuration for a serial port.
*/
struct sp_port_config;
/**
* @struct sp_event_set
* A set of handles to wait on for events.
*/
struct sp_event_set {
/** Array of OS-specific handles. */
void *handles;
/** Array of bitmasks indicating which events apply for each handle. */
enum sp_event *masks;
/** Number of handles. */
unsigned int count;
};
/**
* @defgroup Enumeration Port enumeration
*
* Enumerating the serial ports of a system.
*
* See @ref list_ports.c for a working example of port enumeration.
*
* @{
*/
/**
* Obtain a pointer to a new sp_port structure representing the named port.
*
* The user should allocate a variable of type "struct sp_port *" and pass a
* pointer to this to receive the result.
*
* The result should be freed after use by calling sp_free_port().
*
* @param[in] portname The OS-specific name of a serial port. Must not be NULL.
* @param[out] port_ptr If any error is returned, the variable pointed to by
* port_ptr will be set to NULL. Otherwise, it will be set
* to point to the newly allocated port. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr);
/**
* Free a port structure obtained from sp_get_port_by_name() or sp_copy_port().
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @since 0.1.0
*/
void sp_free_port(struct sp_port *port);
/**
* List the serial ports available on the system.
*
* The result obtained is an array of pointers to sp_port structures,
* terminated by a NULL. The user should allocate a variable of type
* "struct sp_port **" and pass a pointer to this to receive the result.
*
* The result should be freed after use by calling sp_free_port_list().
* If a port from the list is to be used after freeing the list, it must be
* copied first using sp_copy_port().
*
* @param[out] list_ptr If any error is returned, the variable pointed to by
* list_ptr will be set to NULL. Otherwise, it will be set
* to point to the newly allocated array. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_list_ports(struct sp_port ***list_ptr);
/**
* Make a new copy of an sp_port structure.
*
* The user should allocate a variable of type "struct sp_port *" and pass a
* pointer to this to receive the result.
*
* The copy should be freed after use by calling sp_free_port().
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] copy_ptr If any error is returned, the variable pointed to by
* copy_ptr will be set to NULL. Otherwise, it will be set
* to point to the newly allocated copy. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr);
/**
* Free a port list obtained from sp_list_ports().
*
* This will also free all the sp_port structures referred to from the list;
* any that are to be retained must be copied first using sp_copy_port().
*
* @param[in] ports Pointer to a list of port structures. Must not be NULL.
*
* @since 0.1.0
*/
void sp_free_port_list(struct sp_port **ports);
/**
* @}
* @defgroup Ports Port handling
*
* Opening, closing and querying ports.
*
* See @ref port_info.c for a working example of getting port information.
*
* @{
*/
/**
* Open the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] flags Flags to use when opening the serial port.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_open(struct sp_port *port, enum sp_mode flags);
/**
* Close the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_close(struct sp_port *port);
/**
* Get the name of a port.
*
* The name returned is whatever is normally used to refer to a port on the
* current operating system; e.g. for Windows it will usually be a "COMn"
* device name, and for Unix it will be a device path beginning with "/dev/".
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port name, or NULL if an invalid port is passed. The name
* string is part of the port structure and may not be used after
* the port structure has been freed.
*
* @since 0.1.0
*/
char *sp_get_port_name(const struct sp_port *port);
/**
* Get a description for a port, to present to end user.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port description, or NULL if an invalid port is passed.
* The description string is part of the port structure and may not
* be used after the port structure has been freed.
*
* @since 0.1.1
*/
char *sp_get_port_description(const struct sp_port *port);
/**
* Get the transport type used by a port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port transport type.
*
* @since 0.1.1
*/
enum sp_transport sp_get_port_transport(const struct sp_port *port);
/**
* Get the USB bus number and address on bus of a USB serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] usb_bus Pointer to a variable to store the USB bus.
* Can be NULL (in that case it will be ignored).
* @param[out] usb_address Pointer to a variable to store the USB address.
* Can be NULL (in that case it will be ignored).
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.1
*/
enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port,
int *usb_bus, int *usb_address);
/**
* Get the USB Vendor ID and Product ID of a USB serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] usb_vid Pointer to a variable to store the USB VID.
* Can be NULL (in that case it will be ignored).
* @param[out] usb_pid Pointer to a variable to store the USB PID.
* Can be NULL (in that case it will be ignored).
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.1
*/
enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid);
/**
* Get the USB manufacturer string of a USB serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port manufacturer string, or NULL if an invalid port is passed.
* The manufacturer string is part of the port structure and may not
* be used after the port structure has been freed.
*
* @since 0.1.1
*/
char *sp_get_port_usb_manufacturer(const struct sp_port *port);
/**
* Get the USB product string of a USB serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port product string, or NULL if an invalid port is passed.
* The product string is part of the port structure and may not be
* used after the port structure has been freed.
*
* @since 0.1.1
*/
char *sp_get_port_usb_product(const struct sp_port *port);
/**
* Get the USB serial number string of a USB serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port serial number, or NULL if an invalid port is passed.
* The serial number string is part of the port structure and may
* not be used after the port structure has been freed.
*
* @since 0.1.1
*/
char *sp_get_port_usb_serial(const struct sp_port *port);
/**
* Get the MAC address of a Bluetooth serial adapter port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return The port MAC address, or NULL if an invalid port is passed.
* The MAC address string is part of the port structure and may not
* be used after the port structure has been freed.
*
* @since 0.1.1
*/
char *sp_get_port_bluetooth_address(const struct sp_port *port);
/**
* Get the operating system handle for a port.
*
* The type of the handle depends on the operating system. On Unix based
* systems, the handle is a file descriptor of type "int". On Windows, the
* handle is of type "HANDLE". The user should allocate a variable of the
* appropriate type and pass a pointer to this to receive the result.
*
* To obtain a valid handle, the port must first be opened by calling
* sp_open() using the same port structure.
*
* After the port is closed or the port structure freed, the handle may
* no longer be valid.
*
* @warning This feature is provided so that programs may make use of
* OS-specific functionality where desired. Doing so obviously
* comes at a cost in portability. It also cannot be guaranteed
* that direct usage of the OS handle will not conflict with the
* library's own usage of the port. Be careful.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] result_ptr If any error is returned, the variable pointed to by
* result_ptr will have unknown contents and should not
* be used. Otherwise, it will be set to point to the
* OS handle. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr);
/**
* @}
*
* @defgroup Configuration Configuration
*
* Setting and querying serial port parameters.
* @{
*/
/**
* Allocate a port configuration structure.
*
* The user should allocate a variable of type "struct sp_port_config *" and
* pass a pointer to this to receive the result. The variable will be updated
* to point to the new configuration structure. The structure is opaque and
* must be accessed via the functions provided.
*
* All parameters in the structure will be initialised to special values which
* are ignored by sp_set_config().
*
* The structure should be freed after use by calling sp_free_config().
*
* @param[out] config_ptr If any error is returned, the variable pointed to by
* config_ptr will be set to NULL. Otherwise, it will
* be set to point to the allocated config structure.
* Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_new_config(struct sp_port_config **config_ptr);
/**
* Free a port configuration structure.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
*
* @since 0.1.0
*/
void sp_free_config(struct sp_port_config *config);
/**
* Get the current configuration of the specified serial port.
*
* The user should allocate a configuration structure using sp_new_config()
* and pass this as the config parameter. The configuration structure will
* be updated with the port configuration.
*
* Any parameters that are configured with settings not recognised or
* supported by libserialport, will be set to special values that are
* ignored by sp_set_config().
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] config Pointer to a configuration structure that will hold
* the result. Upon errors the contents of the config
* struct will not be changed. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config);
/**
* Set the configuration for the specified serial port.
*
* For each parameter in the configuration, there is a special value (usually
* -1, but see the documentation for each field). These values will be ignored
* and the corresponding setting left unchanged on the port.
*
* Upon errors, the configuration of the serial port is unknown since
* partial/incomplete config updates may have happened.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] config Pointer to a configuration structure. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config);
/**
* Set the baud rate for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] baudrate Baud rate in bits per second.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate);
/**
* Get the baud rate from a port configuration.
*
* The user should allocate a variable of type int and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr);
/**
* Set the baud rate in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate);
/**
* Set the data bits for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] bits Number of data bits.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_bits(struct sp_port *port, int bits);
/**
* Get the data bits from a port configuration.
*
* The user should allocate a variable of type int and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr);
/**
* Set the data bits in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] bits Number of data bits, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits);
/**
* Set the parity setting for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] parity Parity setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity);
/**
* Get the parity setting from a port configuration.
*
* The user should allocate a variable of type enum sp_parity and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr);
/**
* Set the parity setting in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] parity Parity setting, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity);
/**
* Set the stop bits for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] stopbits Number of stop bits.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits);
/**
* Get the stop bits from a port configuration.
*
* The user should allocate a variable of type int and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr);
/**
* Set the stop bits in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] stopbits Number of stop bits, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits);
/**
* Set the RTS pin behaviour for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] rts RTS pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts);
/**
* Get the RTS pin behaviour from a port configuration.
*
* The user should allocate a variable of type enum sp_rts and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr);
/**
* Set the RTS pin behaviour in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] rts RTS pin mode, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts);
/**
* Set the CTS pin behaviour for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] cts CTS pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts);
/**
* Get the CTS pin behaviour from a port configuration.
*
* The user should allocate a variable of type enum sp_cts and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr);
/**
* Set the CTS pin behaviour in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] cts CTS pin mode, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts);
/**
* Set the DTR pin behaviour for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] dtr DTR pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr);
/**
* Get the DTR pin behaviour from a port configuration.
*
* The user should allocate a variable of type enum sp_dtr and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr);
/**
* Set the DTR pin behaviour in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] dtr DTR pin mode, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr);
/**
* Set the DSR pin behaviour for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] dsr DSR pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr);
/**
* Get the DSR pin behaviour from a port configuration.
*
* The user should allocate a variable of type enum sp_dsr and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr);
/**
* Set the DSR pin behaviour in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] dsr DSR pin mode, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr);
/**
* Set the XON/XOFF configuration for the specified serial port.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] xon_xoff XON/XOFF mode.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff);
/**
* Get the XON/XOFF configuration from a port configuration.
*
* The user should allocate a variable of type enum sp_xonxoff and
* pass a pointer to this to receive the result.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr);
/**
* Set the XON/XOFF configuration in a port configuration.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff);
/**
* Set the flow control type in a port configuration.
*
* This function is a wrapper that sets the RTS, CTS, DTR, DSR and
* XON/XOFF settings as necessary for the specified flow control
* type. For more fine-grained control of these settings, use their
* individual configuration functions.
*
* @param[in] config Pointer to a configuration structure. Must not be NULL.
* @param[in] flowcontrol Flow control setting to use.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol);
/**
* Set the flow control type for the specified serial port.
*
* This function is a wrapper that sets the RTS, CTS, DTR, DSR and
* XON/XOFF settings as necessary for the specified flow control
* type. For more fine-grained control of these settings, use their
* individual configuration functions.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] flowcontrol Flow control setting to use.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol);
/**
* @}
*
* @defgroup Data Data handling
*
* Reading, writing, and flushing data.
*
* @{
*/
/**
* Read bytes from the specified serial port, blocking until complete.
*
* @warning If your program runs on Unix, defines its own signal handlers, and
* needs to abort blocking reads when these are called, then you
* should not use this function. It repeats system calls that return
* with EINTR. To be able to abort a read from a signal handler, you
* should implement your own blocking read using sp_nonblocking_read()
* together with a blocking method that makes sense for your program.
* E.g. you can obtain the file descriptor for an open port using
* sp_get_port_handle() and use this to call select() or pselect(),
* with appropriate arrangements to return if a signal is received.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
* @param[in] count Requested number of bytes to read.
* @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
*
* @return The number of bytes read on success, or a negative error code. If
* the number of bytes returned is less than that requested, the
* timeout was reached before the requested number of bytes was
* available. If timeout is zero, the function will always return
* either the requested number of bytes or a negative error code.
*
* @since 0.1.0
*/
enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
/**
* Read bytes from the specified serial port, returning as soon as any data is
* available.
*
* @warning If your program runs on Unix, defines its own signal handlers, and
* needs to abort blocking reads when these are called, then you
* should not use this function. It repeats system calls that return
* with EINTR. To be able to abort a read from a signal handler, you
* should implement your own blocking read using sp_nonblocking_read()
* together with a blocking method that makes sense for your program.
* E.g. you can obtain the file descriptor for an open port using
* sp_get_port_handle() and use this to call select() or pselect(),
* with appropriate arrangements to return if a signal is received.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
* @param[in] count Maximum number of bytes to read. Must not be zero.
* @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
*
* @return The number of bytes read on success, or a negative error code. If
* the result is zero, the timeout was reached before any bytes were
* available. If timeout_ms is zero, the function will always return
* either at least one byte, or a negative error code.
*
* @since 0.1.1
*/
enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
/**
* Read bytes from the specified serial port, without blocking.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
* @param[in] count Maximum number of bytes to read.
*
* @return The number of bytes read on success, or a negative error code. The
* number of bytes returned may be any number from zero to the maximum
* that was requested.
*
* @since 0.1.0
*/
enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count);
/**
* Write bytes to the specified serial port, blocking until complete.
*
* Note that this function only ensures that the accepted bytes have been
* written to the OS; they may be held in driver or hardware buffers and not
* yet physically transmitted. To check whether all written bytes have actually
* been transmitted, use the sp_output_waiting() function. To wait until all
* written bytes have actually been transmitted, use the sp_drain() function.
*
* @warning If your program runs on Unix, defines its own signal handlers, and
* needs to abort blocking writes when these are called, then you
* should not use this function. It repeats system calls that return
* with EINTR. To be able to abort a write from a signal handler, you
* should implement your own blocking write using sp_nonblocking_write()
* together with a blocking method that makes sense for your program.
* E.g. you can obtain the file descriptor for an open port using
* sp_get_port_handle() and use this to call select() or pselect(),
* with appropriate arrangements to return if a signal is received.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] buf Buffer containing the bytes to write. Must not be NULL.
* @param[in] count Requested number of bytes to write.
* @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
*
* @return The number of bytes written on success, or a negative error code.
* If the number of bytes returned is less than that requested, the
* timeout was reached before the requested number of bytes was
* written. If timeout is zero, the function will always return
* either the requested number of bytes or a negative error code. In
* the event of an error there is no way to determine how many bytes
* were sent before the error occurred.
*
* @since 0.1.0
*/
enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms);
/**
* Write bytes to the specified serial port, without blocking.
*
* Note that this function only ensures that the accepted bytes have been
* written to the OS; they may be held in driver or hardware buffers and not
* yet physically transmitted. To check whether all written bytes have actually
* been transmitted, use the sp_output_waiting() function. To wait until all
* written bytes have actually been transmitted, use the sp_drain() function.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] buf Buffer containing the bytes to write. Must not be NULL.
* @param[in] count Maximum number of bytes to write.
*
* @return The number of bytes written on success, or a negative error code.
* The number of bytes returned may be any number from zero to the
* maximum that was requested.
*
* @since 0.1.0
*/
enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count);
/**
* Gets the number of bytes waiting in the input buffer.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return Number of bytes waiting on success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_input_waiting(struct sp_port *port);
/**
* Gets the number of bytes waiting in the output buffer.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return Number of bytes waiting on success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_output_waiting(struct sp_port *port);
/**
* Flush serial port buffers. Data in the selected buffer(s) is discarded.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] buffers Which buffer(s) to flush.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers);
/**
* Wait for buffered data to be transmitted.
*
* @warning If your program runs on Unix, defines its own signal handlers, and
* needs to abort draining the output buffer when when these are
* called, then you should not use this function. It repeats system
* calls that return with EINTR. To be able to abort a drain from a
* signal handler, you would need to implement your own blocking
* drain by polling the result of sp_output_waiting().
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_drain(struct sp_port *port);
/**
* @}
*
* @defgroup Waiting Waiting
*
* Waiting for events and timeout handling.
*
* @{
*/
/**
* Allocate storage for a set of events.
*
* The user should allocate a variable of type struct sp_event_set *,
* then pass a pointer to this variable to receive the result.
*
* The result should be freed after use by calling sp_free_event_set().
*
* @param[out] result_ptr If any error is returned, the variable pointed to by
* result_ptr will be set to NULL. Otherwise, it will
* be set to point to the event set. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_new_event_set(struct sp_event_set **result_ptr);
/**
* Add events to a struct sp_event_set for a given port.
*
* The port must first be opened by calling sp_open() using the same port
* structure.
*
* After the port is closed or the port structure freed, the results may
* no longer be valid.
*
* @param[in,out] event_set Event set to update. Must not be NULL.
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[in] mask Bitmask of events to be waited for.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_add_port_events(struct sp_event_set *event_set,
const struct sp_port *port, enum sp_event mask);
/**
* Wait for any of a set of events to occur.
*
* @param[in] event_set Event set to wait on. Must not be NULL.
* @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms);
/**
* Free a structure allocated by sp_new_event_set().
*
* @param[in] event_set Event set to free. Must not be NULL.
*
* @since 0.1.0
*/
void sp_free_event_set(struct sp_event_set *event_set);
/**
* @}
*
* @defgroup Signals Signals
*
* Port signalling operations.
*
* @{
*/
/**
* Gets the status of the control signals for the specified port.
*
* The user should allocate a variable of type "enum sp_signal" and pass a
* pointer to this variable to receive the result. The result is a bitmask
* in which individual signals can be checked by bitwise OR with values of
* the sp_signal enum.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
* @param[out] signal_mask Pointer to a variable to receive the result.
* Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask);
/**
* Put the port transmit line into the break state.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_start_break(struct sp_port *port);
/**
* Take the port transmit line out of the break state.
*
* @param[in] port Pointer to a port structure. Must not be NULL.
*
* @return SP_OK upon success, a negative error code otherwise.
*
* @since 0.1.0
*/
enum sp_return sp_end_break(struct sp_port *port);
/**
* @}
*
* @defgroup Errors Errors
*
* Obtaining error information.
*
* @{
*/
/**
* Get the error code for a failed operation.
*
* In order to obtain the correct result, this function should be called
* straight after the failure, before executing any other system operations.
* The result is thread-specific, and only valid when called immediately
* after a previous call returning SP_ERR_FAIL.
*
* @return The system's numeric code for the error that caused the last
* operation to fail.
*
* @since 0.1.0
*/
int sp_last_error_code(void);
/**
* Get the error message for a failed operation.
*
* In order to obtain the correct result, this function should be called
* straight after the failure, before executing other system operations.
* The result is thread-specific, and only valid when called immediately
* after a previous call returning SP_ERR_FAIL.
*
* @return The system's message for the error that caused the last
* operation to fail. This string may be allocated by the function,
* and should be freed after use by calling sp_free_error_message().
*
* @since 0.1.0
*/
char *sp_last_error_message(void);
/**
* Free an error message returned by sp_last_error_message().
*
* @param[in] message The error message string to free. Must not be NULL.
*
* @since 0.1.0
*/
void sp_free_error_message(char *message);
/**
* Set the handler function for library debugging messages.
*
* Debugging messages are generated by the library during each operation,
* to help in diagnosing problems. The handler will be called for each
* message. The handler can be set to NULL to ignore all debug messages.
*
* The handler function should accept a format string and variable length
* argument list, in the same manner as e.g. printf().
*
* The default handler is sp_default_debug_handler().
*
* @param[in] handler The handler function to use. Can be NULL (in that case
* all debug messages will be ignored).
*
* @since 0.1.0
*/
void sp_set_debug_handler(void (*handler)(const char *format, ...));
/**
* Default handler function for library debugging messages.
*
* This function prints debug messages to the standard error stream if the
* environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are
* ignored.
*
* @param[in] format The format string to use. Must not be NULL.
* @param[in] ... The variable length argument list to use.
*
* @since 0.1.0
*/
void sp_default_debug_handler(const char *format, ...);
/** @} */
/**
* @defgroup Versions Versions
*
* Version number querying functions, definitions, and macros.
*
* This set of API calls returns two different version numbers related
* to libserialport. The "package version" is the release version number of the
* libserialport tarball in the usual "major.minor.micro" format, e.g. "0.1.0".
*
* The "library version" is independent of that; it is the libtool version
* number in the "current:revision:age" format, e.g. "2:0:0".
* See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning for details.
*
* Both version numbers (and/or individual components of them) can be
* retrieved via the API calls at runtime, and/or they can be checked at
* compile/preprocessor time using the respective macros.
*
* @{
*/
/*
* Package version macros (can be used for conditional compilation).
*/
/** The libserialport package 'major' version number. */
#undef SP_PACKAGE_VERSION_MAJOR
/** The libserialport package 'minor' version number. */
#undef SP_PACKAGE_VERSION_MINOR
/** The libserialport package 'micro' version number. */
#undef SP_PACKAGE_VERSION_MICRO
/** The libserialport package version ("major.minor.micro") as string. */
#undef SP_PACKAGE_VERSION_STRING
/*
* Library/libtool version macros (can be used for conditional compilation).
*/
/** The libserialport libtool 'current' version number. */
#undef SP_LIB_VERSION_CURRENT
/** The libserialport libtool 'revision' version number. */
#undef SP_LIB_VERSION_REVISION
/** The libserialport libtool 'age' version number. */
#undef SP_LIB_VERSION_AGE
/** The libserialport libtool version ("current:revision:age") as string. */
#undef SP_LIB_VERSION_STRING
/**
* Get the major libserialport package version number.
*
* @return The major package version number.
*
* @since 0.1.0
*/
int sp_get_major_package_version(void);
/**
* Get the minor libserialport package version number.
*
* @return The minor package version number.
*
* @since 0.1.0
*/
int sp_get_minor_package_version(void);
/**
* Get the micro libserialport package version number.
*
* @return The micro package version number.
*
* @since 0.1.0
*/
int sp_get_micro_package_version(void);
/**
* Get the libserialport package version number as a string.
*
* @return The package version number string. The returned string is
* static and thus should NOT be free'd by the caller.
*
* @since 0.1.0
*/
const char *sp_get_package_version_string(void);
/**
* Get the "current" part of the libserialport library version number.
*
* @return The "current" library version number.
*
* @since 0.1.0
*/
int sp_get_current_lib_version(void);
/**
* Get the "revision" part of the libserialport library version number.
*
* @return The "revision" library version number.
*
* @since 0.1.0
*/
int sp_get_revision_lib_version(void);
/**
* Get the "age" part of the libserialport library version number.
*
* @return The "age" library version number.
*
* @since 0.1.0
*/
int sp_get_age_lib_version(void);
/**
* Get the libserialport library version number as a string.
*
* @return The library version number string. The returned string is
* static and thus should NOT be free'd by the caller.
*
* @since 0.1.0
*/
const char *sp_get_lib_version_string(void);
/** @} */
/**
* @example list_ports.c Getting a list of ports present on the system.
* @example port_info.c Getting information on a particular serial port.
*/
#ifdef __cplusplus
}
#endif
#endif