1
0
mirror of git://sigrok.org/libserialport synced 2023-08-10 21:13:24 +03:00
libserialport/examples/send_receive.c
2020-02-07 13:59:31 +00:00

137 lines
4.0 KiB
C

#include <libserialport.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
/* Example of how to send and receive data.
*
* This example file is released to the public domain. */
/* Helper function for error handling. */
int check(enum sp_return result);
int main(int argc, char **argv)
{
/* This example can be used with one or two ports. With one port, it
* will send data and try to receive it on the same port. This can be
* done by connecting a single wire between the TX and RX pins of the
* port.
*
* Alternatively it can be used with two serial ports connected to each
* other, so that data can be sent on one and received on the other.
* This can be done with two ports with TX/RX cross-connected, e.g. by
* a "null modem" cable, or with a pair of interconnected virtual ports,
* such as those created by com0com on Windows or tty0tty on Linux. */
/* Get the port names from the command line. */
if (argc < 2 || argc > 3) {
printf("Usage: %s <port 1> [<port 2>]\n", argv[0]);
return -1;
}
int num_ports = argc - 1;
char **port_names = argv + 1;
/* The ports we will use. */
struct sp_port *ports[2];
/* Open and configure each port. */
for (int i = 0; i < num_ports; i++) {
printf("Looking for port %s.\n", port_names[i]);
check(sp_get_port_by_name(port_names[i], &ports[i]));
printf("Opening port.\n");
check(sp_open(ports[i], SP_MODE_READ_WRITE));
printf("Setting port to 9600 8N1, no flow control.\n");
check(sp_set_baudrate(ports[i], 9600));
check(sp_set_bits(ports[i], 8));
check(sp_set_parity(ports[i], SP_PARITY_NONE));
check(sp_set_stopbits(ports[i], 1));
check(sp_set_flowcontrol(ports[i], SP_FLOWCONTROL_NONE));
}
/* Now send some data on each port and receive it back. */
for (int tx = 0; tx < num_ports; tx++) {
/* Get the ports to send and receive on. */
int rx = num_ports == 1 ? 0 : ((tx == 0) ? 1 : 0);
struct sp_port *tx_port = ports[tx];
struct sp_port *rx_port = ports[rx];
/* The data we will send. */
char *data = "Hello!";
int size = strlen(data);
/* We'll allow a 1 second timeout for send and receive. */
unsigned int timeout = 1000;
/* On success, sp_blocking_write() and sp_blocking_read()
* return the number of bytes sent/received before the
* timeout expired. We'll store that result here. */
int result;
/* Send data. */
printf("Sending '%s' (%d bytes) on port %s.\n",
data, size, sp_get_port_name(tx_port));
result = check(sp_blocking_write(tx_port, data, size, timeout));
/* Check whether we sent all of the data. */
if (result == size)
printf("Sent %d bytes successfully.\n", size);
else
printf("Timed out, %d/%d bytes sent.\n", result, size);
/* Allocate a buffer to receive data. */
char buf[size + 1];
/* Try to receive the data on the other port. */
printf("Receiving %d bytes on port %s.\n",
size, sp_get_port_name(rx_port));
check(sp_blocking_read(rx_port, buf, size, timeout));
/* Check whether we received the number of bytes we wanted. */
if (result == size)
printf("Received %d bytes successfully.\n", size);
else
printf("Timed out, %d/%d bytes received.\n", result, size);
/* Check if we received the same data we sent. */
buf[result] = '\0';
printf("Received '%s'.\n", buf);
}
/* Close ports and free resources. */
for (int i = 0; i < num_ports; i++) {
check(sp_close(ports[i]));
sp_free_port(ports[i]);
}
return 0;
}
/* Helper function for error handling. */
int check(enum sp_return result)
{
/* For this example we'll just exit on any error by calling abort(). */
char *error_message;
switch (result) {
case SP_ERR_ARG:
printf("Error: Invalid argument.\n");
abort();
case SP_ERR_FAIL:
error_message = sp_last_error_message();
printf("Error: Failed: %s\n", error_message);
sp_free_error_message(error_message);
abort();
case SP_ERR_SUPP:
printf("Error: Not supported.\n");
abort();
case SP_ERR_MEM:
printf("Error: Couldn't allocate memory.\n");
abort();
case SP_OK:
default:
return result;
}
}