mirror/v
1
0
Fork 0
mirror of https://github.com/vlang/v.git synced 2023-08-10 21:13:21 +03:00
Code Issues Projects Releases Wiki Activity
43800a05e8
v/thirdparty/mbedtls/include/psa/crypto_extra.h

1909 lines
80 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
* \file psa/crypto_extra.h
*
* \brief PSA cryptography module: Mbed TLS vendor extensions
*
* \note This file may not be included directly. Applications must
* include psa/crypto.h.
*
* This file is reserved for vendor-specific definitions.
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef PSA_CRYPTO_EXTRA_H
#define PSA_CRYPTO_EXTRA_H
#include "mbedtls/private_access.h"
#include "mbedtls/platform_util.h"
#include "crypto_types.h"
#include "crypto_compat.h"
#ifdef __cplusplus
extern "C" {
#endif
/* UID for secure storage seed */
#define PSA_CRYPTO_ITS_RANDOM_SEED_UID 0xFFFFFF52
/* See mbedtls_config.h for definition */
#if !defined(MBEDTLS_PSA_KEY_SLOT_COUNT)
#define MBEDTLS_PSA_KEY_SLOT_COUNT 32
#endif
/** \addtogroup attributes
* @{
*/
/** \brief Declare the enrollment algorithm for a key.
*
* An operation on a key may indifferently use the algorithm set with
* psa_set_key_algorithm() or with this function.
*
* \param[out] attributes The attribute structure to write to.
* \param alg2 A second algorithm that the key may be used
* for, in addition to the algorithm set with
* psa_set_key_algorithm().
*
* \warning Setting an enrollment algorithm is not recommended, because
* using the same key with different algorithms can allow some
* attacks based on arithmetic relations between different
* computations made with the same key, or can escalate harmless
* side channels into exploitable ones. Use this function only
* if it is necessary to support a protocol for which it has been
* verified that the usage of the key with multiple algorithms
* is safe.
*/
static inline void psa_set_key_enrollment_algorithm(
psa_key_attributes_t *attributes,
psa_algorithm_t alg2)
{
attributes->MBEDTLS_PRIVATE(core).MBEDTLS_PRIVATE(policy).MBEDTLS_PRIVATE(alg2) = alg2;
}
/** Retrieve the enrollment algorithm policy from key attributes.
*
* \param[in] attributes The key attribute structure to query.
*
* \return The enrollment algorithm stored in the attribute structure.
*/
static inline psa_algorithm_t psa_get_key_enrollment_algorithm(
const psa_key_attributes_t *attributes)
{
return( attributes->MBEDTLS_PRIVATE(core).MBEDTLS_PRIVATE(policy).MBEDTLS_PRIVATE(alg2) );
}
#if defined(MBEDTLS_PSA_CRYPTO_SE_C)
/** Retrieve the slot number where a key is stored.
*
* A slot number is only defined for keys that are stored in a secure
* element.
*
* This information is only useful if the secure element is not entirely
* managed through the PSA Cryptography API. It is up to the secure
* element driver to decide how PSA slot numbers map to any other interface
* that the secure element may have.
*
* \param[in] attributes The key attribute structure to query.
* \param[out] slot_number On success, the slot number containing the key.
*
* \retval #PSA_SUCCESS
* The key is located in a secure element, and \p *slot_number
* indicates the slot number that contains it.
* \retval #PSA_ERROR_NOT_PERMITTED
* The caller is not permitted to query the slot number.
* Mbed Crypto currently does not return this error.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key is not located in a secure element.
*/
psa_status_t psa_get_key_slot_number(
const psa_key_attributes_t *attributes,
psa_key_slot_number_t *slot_number );
/** Choose the slot number where a key is stored.
*
* This function declares a slot number in the specified attribute
* structure.
*
* A slot number is only meaningful for keys that are stored in a secure
* element. It is up to the secure element driver to decide how PSA slot
* numbers map to any other interface that the secure element may have.
*
* \note Setting a slot number in key attributes for a key creation can
* cause the following errors when creating the key:
* - #PSA_ERROR_NOT_SUPPORTED if the selected secure element does
* not support choosing a specific slot number.
* - #PSA_ERROR_NOT_PERMITTED if the caller is not permitted to
* choose slot numbers in general or to choose this specific slot.
* - #PSA_ERROR_INVALID_ARGUMENT if the chosen slot number is not
* valid in general or not valid for this specific key.
* - #PSA_ERROR_ALREADY_EXISTS if there is already a key in the
* selected slot.
*
* \param[out] attributes The attribute structure to write to.
* \param slot_number The slot number to set.
*/
static inline void psa_set_key_slot_number(
psa_key_attributes_t *attributes,
psa_key_slot_number_t slot_number )
{
attributes->MBEDTLS_PRIVATE(core).MBEDTLS_PRIVATE(flags) |= MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER;
attributes->MBEDTLS_PRIVATE(slot_number) = slot_number;
}
/** Remove the slot number attribute from a key attribute structure.
*
* This function undoes the action of psa_set_key_slot_number().
*
* \param[out] attributes The attribute structure to write to.
*/
static inline void psa_clear_key_slot_number(
psa_key_attributes_t *attributes )
{
attributes->MBEDTLS_PRIVATE(core).MBEDTLS_PRIVATE(flags) &= ~MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER;
}
/** Register a key that is already present in a secure element.
*
* The key must be located in a secure element designated by the
* lifetime field in \p attributes, in the slot set with
* psa_set_key_slot_number() in the attribute structure.
* This function makes the key available through the key identifier
* specified in \p attributes.
*
* \param[in] attributes The attributes of the existing key.
*
* \retval #PSA_SUCCESS
* The key was successfully registered.
* Note that depending on the design of the driver, this may or may
* not guarantee that a key actually exists in the designated slot
* and is compatible with the specified attributes.
* \retval #PSA_ERROR_ALREADY_EXISTS
* There is already a key with the identifier specified in
* \p attributes.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The secure element driver for the specified lifetime does not
* support registering a key.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The identifier in \p attributes is invalid, namely the identifier is
* not in the user range, or
* \p attributes specifies a lifetime which is not located
* in a secure element, or no slot number is specified in \p attributes,
* or the specified slot number is not valid.
* \retval #PSA_ERROR_NOT_PERMITTED
* The caller is not authorized to register the specified key slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_STORAGE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_DATA_INVALID
* \retval #PSA_ERROR_DATA_CORRUPT
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t mbedtls_psa_register_se_key(
const psa_key_attributes_t *attributes);
#endif /* MBEDTLS_PSA_CRYPTO_SE_C */
/**@}*/
/**
* \brief Library deinitialization.
*
* This function clears all data associated with the PSA layer,
* including the whole key store.
*
* This is an Mbed TLS extension.
*/
void mbedtls_psa_crypto_free( void );
/** \brief Statistics about
* resource consumption related to the PSA keystore.
*
* \note The content of this structure is not part of the stable API and ABI
* of Mbed Crypto and may change arbitrarily from version to version.
*/
typedef struct mbedtls_psa_stats_s
{
/** Number of slots containing key material for a volatile key. */
size_t MBEDTLS_PRIVATE(volatile_slots);
/** Number of slots containing key material for a key which is in
* internal persistent storage. */
size_t MBEDTLS_PRIVATE(persistent_slots);
/** Number of slots containing a reference to a key in a
* secure element. */
size_t MBEDTLS_PRIVATE(external_slots);
/** Number of slots which are occupied, but do not contain
* key material yet. */
size_t MBEDTLS_PRIVATE(half_filled_slots);
/** Number of slots that contain cache data. */
size_t MBEDTLS_PRIVATE(cache_slots);
/** Number of slots that are not used for anything. */
size_t MBEDTLS_PRIVATE(empty_slots);
/** Number of slots that are locked. */
size_t MBEDTLS_PRIVATE(locked_slots);
/** Largest key id value among open keys in internal persistent storage. */
psa_key_id_t MBEDTLS_PRIVATE(max_open_internal_key_id);
/** Largest key id value among open keys in secure elements. */
psa_key_id_t MBEDTLS_PRIVATE(max_open_external_key_id);
} mbedtls_psa_stats_t;
/** \brief Get statistics about
* resource consumption related to the PSA keystore.
*
* \note When Mbed Crypto is built as part of a service, with isolation
* between the application and the keystore, the service may or
* may not expose this function.
*/
void mbedtls_psa_get_stats( mbedtls_psa_stats_t *stats );
/**
* \brief Inject an initial entropy seed for the random generator into
* secure storage.
*
* This function injects data to be used as a seed for the random generator
* used by the PSA Crypto implementation. On devices that lack a trusted
* entropy source (preferably a hardware random number generator),
* the Mbed PSA Crypto implementation uses this value to seed its
* random generator.
*
* On devices without a trusted entropy source, this function must be
* called exactly once in the lifetime of the device. On devices with
* a trusted entropy source, calling this function is optional.
* In all cases, this function may only be called before calling any
* other function in the PSA Crypto API, including psa_crypto_init().
*
* When this function returns successfully, it populates a file in
* persistent storage. Once the file has been created, this function
* can no longer succeed.
*
* If any error occurs, this function does not change the system state.
* You can call this function again after correcting the reason for the
* error if possible.
*
* \warning This function **can** fail! Callers MUST check the return status.
*
* \warning If you use this function, you should use it as part of a
* factory provisioning process. The value of the injected seed
* is critical to the security of the device. It must be
* *secret*, *unpredictable* and (statistically) *unique per device*.
* You should be generate it randomly using a cryptographically
* secure random generator seeded from trusted entropy sources.
* You should transmit it securely to the device and ensure
* that its value is not leaked or stored anywhere beyond the
* needs of transmitting it from the point of generation to
* the call of this function, and erase all copies of the value
* once this function returns.
*
* This is an Mbed TLS extension.
*
* \note This function is only available on the following platforms:
* * If the compile-time option MBEDTLS_PSA_INJECT_ENTROPY is enabled.
* Note that you must provide compatible implementations of
* mbedtls_nv_seed_read and mbedtls_nv_seed_write.
* * In a client-server integration of PSA Cryptography, on the client side,
* if the server supports this feature.
* \param[in] seed Buffer containing the seed value to inject.
* \param[in] seed_size Size of the \p seed buffer.
* The size of the seed in bytes must be greater
* or equal to both #MBEDTLS_ENTROPY_BLOCK_SIZE
* and the value of \c MBEDTLS_ENTROPY_MIN_PLATFORM
* in `library/entropy_poll.h` in the Mbed TLS source
* code.
* It must be less or equal to
* #MBEDTLS_ENTROPY_MAX_SEED_SIZE.
*
* \retval #PSA_SUCCESS
* The seed value was injected successfully. The random generator
* of the PSA Crypto implementation is now ready for use.
* You may now call psa_crypto_init() and use the PSA Crypto
* implementation.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p seed_size is out of range.
* \retval #PSA_ERROR_STORAGE_FAILURE
* There was a failure reading or writing from storage.
* \retval #PSA_ERROR_NOT_PERMITTED
* The library has already been initialized. It is no longer
* possible to call this function.
*/
psa_status_t mbedtls_psa_inject_entropy(const uint8_t *seed,
size_t seed_size);
/** \addtogroup crypto_types
* @{
*/
/** DSA public key.
*
* The import and export format is the
* representation of the public key `y = g^x mod p` as a big-endian byte
* string. The length of the byte string is the length of the base prime `p`
* in bytes.
*/
#define PSA_KEY_TYPE_DSA_PUBLIC_KEY ((psa_key_type_t)0x4002)
/** DSA key pair (private and public key).
*
* The import and export format is the
* representation of the private key `x` as a big-endian byte string. The
* length of the byte string is the private key size in bytes (leading zeroes
* are not stripped).
*
* Deterministic DSA key derivation with psa_generate_derived_key follows
* FIPS 186-4 §B.1.2: interpret the byte string as integer
* in big-endian order. Discard it if it is not in the range
* [0, *N* - 2] where *N* is the boundary of the private key domain
* (the prime *p* for Diffie-Hellman, the subprime *q* for DSA,
* or the order of the curve's base point for ECC).
* Add 1 to the resulting integer and use this as the private key *x*.
*
*/
#define PSA_KEY_TYPE_DSA_KEY_PAIR ((psa_key_type_t)0x7002)
/** Whether a key type is an DSA key (pair or public-only). */
#define PSA_KEY_TYPE_IS_DSA(type) \
(PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY)
#define PSA_ALG_DSA_BASE ((psa_algorithm_t)0x06000400)
/** DSA signature with hashing.
*
* This is the signature scheme defined by FIPS 186-4,
* with a random per-message secret number (*k*).
*
* \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_HASH(\p hash_alg) is true).
* This includes #PSA_ALG_ANY_HASH
* when specifying the algorithm in a usage policy.
*
* \return The corresponding DSA signature algorithm.
* \return Unspecified if \p hash_alg is not a supported
* hash algorithm.
*/
#define PSA_ALG_DSA(hash_alg) \
(PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_DETERMINISTIC_DSA_BASE ((psa_algorithm_t)0x06000500)
#define PSA_ALG_DSA_DETERMINISTIC_FLAG PSA_ALG_ECDSA_DETERMINISTIC_FLAG
/** Deterministic DSA signature with hashing.
*
* This is the deterministic variant defined by RFC 6979 of
* the signature scheme defined by FIPS 186-4.
*
* \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_HASH(\p hash_alg) is true).
* This includes #PSA_ALG_ANY_HASH
* when specifying the algorithm in a usage policy.
*
* \return The corresponding DSA signature algorithm.
* \return Unspecified if \p hash_alg is not a supported
* hash algorithm.
*/
#define PSA_ALG_DETERMINISTIC_DSA(hash_alg) \
(PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_IS_DSA(alg) \
(((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) == \
PSA_ALG_DSA_BASE)
#define PSA_ALG_DSA_IS_DETERMINISTIC(alg) \
(((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0)
#define PSA_ALG_IS_DETERMINISTIC_DSA(alg) \
(PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg))
#define PSA_ALG_IS_RANDOMIZED_DSA(alg) \
(PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg))
/* We need to expand the sample definition of this macro from
* the API definition. */
#undef PSA_ALG_IS_VENDOR_HASH_AND_SIGN
#define PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg) \
PSA_ALG_IS_DSA(alg)
/**@}*/
/** \addtogroup attributes
* @{
*/
/** Custom Diffie-Hellman group.
*
* For keys of type #PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_FAMILY_CUSTOM) or
* #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_FAMILY_CUSTOM), the group data comes
* from domain parameters set by psa_set_key_domain_parameters().
*/
#define PSA_DH_FAMILY_CUSTOM ((psa_dh_family_t) 0x7e)
/**
* \brief Set domain parameters for a key.
*
* Some key types require additional domain parameters in addition to
* the key type identifier and the key size. Use this function instead
* of psa_set_key_type() when you need to specify domain parameters.
*
* The format for the required domain parameters varies based on the key type.
*
* - For RSA keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY or #PSA_KEY_TYPE_RSA_KEY_PAIR),
* the domain parameter data consists of the public exponent,
* represented as a big-endian integer with no leading zeros.
* This information is used when generating an RSA key pair.
* When importing a key, the public exponent is read from the imported
* key data and the exponent recorded in the attribute structure is ignored.
* As an exception, the public exponent 65537 is represented by an empty
* byte string.
* - For DSA keys (#PSA_KEY_TYPE_DSA_PUBLIC_KEY or #PSA_KEY_TYPE_DSA_KEY_PAIR),
* the `Dss-Params` format as defined by RFC 3279 §2.3.2.
* ```
* Dss-Params ::= SEQUENCE {
* p INTEGER,
* q INTEGER,
* g INTEGER
* }
* ```
* - For Diffie-Hellman key exchange keys
* (#PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_FAMILY_CUSTOM) or
* #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_FAMILY_CUSTOM)), the
* `DomainParameters` format as defined by RFC 3279 §2.3.3.
* ```
* DomainParameters ::= SEQUENCE {
* p INTEGER, -- odd prime, p=jq +1
* g INTEGER, -- generator, g
* q INTEGER, -- factor of p-1
* j INTEGER OPTIONAL, -- subgroup factor
* validationParams ValidationParams OPTIONAL
* }
* ValidationParams ::= SEQUENCE {
* seed BIT STRING,
* pgenCounter INTEGER
* }
* ```
*
* \note This function may allocate memory or other resources.
* Once you have called this function on an attribute structure,
* you must call psa_reset_key_attributes() to free these resources.
*
* \note This is an experimental extension to the interface. It may change
* in future versions of the library.
*
* \param[in,out] attributes Attribute structure where the specified domain
* parameters will be stored.
* If this function fails, the content of
* \p attributes is not modified.
* \param type Key type (a \c PSA_KEY_TYPE_XXX value).
* \param[in] data Buffer containing the key domain parameters.
* The content of this buffer is interpreted
* according to \p type as described above.
* \param data_length Size of the \p data buffer in bytes.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
*/
psa_status_t psa_set_key_domain_parameters(psa_key_attributes_t *attributes,
psa_key_type_t type,
const uint8_t *data,
size_t data_length);
/**
* \brief Get domain parameters for a key.
*
* Get the domain parameters for a key with this function, if any. The format
* of the domain parameters written to \p data is specified in the
* documentation for psa_set_key_domain_parameters().
*
* \note This is an experimental extension to the interface. It may change
* in future versions of the library.
*
* \param[in] attributes The key attribute structure to query.
* \param[out] data On success, the key domain parameters.
* \param data_size Size of the \p data buffer in bytes.
* The buffer is guaranteed to be large
* enough if its size in bytes is at least
* the value given by
* PSA_KEY_DOMAIN_PARAMETERS_SIZE().
* \param[out] data_length On success, the number of bytes
* that make up the key domain parameters data.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
*/
psa_status_t psa_get_key_domain_parameters(
const psa_key_attributes_t *attributes,
uint8_t *data,
size_t data_size,
size_t *data_length);
/** Safe output buffer size for psa_get_key_domain_parameters().
*
* This macro returns a compile-time constant if its arguments are
* compile-time constants.
*
* \warning This function may call its arguments multiple times or
* zero times, so you should not pass arguments that contain
* side effects.
*
* \note This is an experimental extension to the interface. It may change
* in future versions of the library.
*
* \param key_type A supported key type.
* \param key_bits The size of the key in bits.
*
* \return If the parameters are valid and supported, return
* a buffer size in bytes that guarantees that
* psa_get_key_domain_parameters() will not fail with
* #PSA_ERROR_BUFFER_TOO_SMALL.
* If the parameters are a valid combination that is not supported
* by the implementation, this macro shall return either a
* sensible size or 0.
* If the parameters are not valid, the
* return value is unspecified.
*/
#define PSA_KEY_DOMAIN_PARAMETERS_SIZE(key_type, key_bits) \
(PSA_KEY_TYPE_IS_RSA(key_type) ? sizeof(int) : \
PSA_KEY_TYPE_IS_DH(key_type) ? PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \
PSA_KEY_TYPE_IS_DSA(key_type) ? PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \
0)
#define PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \
(4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 3 /*without optional parts*/)
#define PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \
(4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 2 /*p, g*/ + 34 /*q*/)
/**@}*/
/** \defgroup psa_tls_helpers TLS helper functions
* @{
*/
#if defined(MBEDTLS_ECP_C)
#include <mbedtls/ecp.h>
/** Convert an ECC curve identifier from the Mbed TLS encoding to PSA.
*
* \note This function is provided solely for the convenience of
* Mbed TLS and may be removed at any time without notice.
*
* \param grpid An Mbed TLS elliptic curve identifier
* (`MBEDTLS_ECP_DP_xxx`).
* \param[out] bits On success, the bit size of the curve.
*
* \return The corresponding PSA elliptic curve identifier
* (`PSA_ECC_FAMILY_xxx`).
* \return \c 0 on failure (\p grpid is not recognized).
*/
static inline psa_ecc_family_t mbedtls_ecc_group_to_psa( mbedtls_ecp_group_id grpid,
size_t *bits )
{
switch( grpid )
{
case MBEDTLS_ECP_DP_SECP192R1:
*bits = 192;
return( PSA_ECC_FAMILY_SECP_R1 );
case MBEDTLS_ECP_DP_SECP224R1:
*bits = 224;
return( PSA_ECC_FAMILY_SECP_R1 );
case MBEDTLS_ECP_DP_SECP256R1:
*bits = 256;
return( PSA_ECC_FAMILY_SECP_R1 );
case MBEDTLS_ECP_DP_SECP384R1:
*bits = 384;
return( PSA_ECC_FAMILY_SECP_R1 );
case MBEDTLS_ECP_DP_SECP521R1:
*bits = 521;
return( PSA_ECC_FAMILY_SECP_R1 );
case MBEDTLS_ECP_DP_BP256R1:
*bits = 256;
return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 );
case MBEDTLS_ECP_DP_BP384R1:
*bits = 384;
return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 );
case MBEDTLS_ECP_DP_BP512R1:
*bits = 512;
return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 );
case MBEDTLS_ECP_DP_CURVE25519:
*bits = 255;
return( PSA_ECC_FAMILY_MONTGOMERY );
case MBEDTLS_ECP_DP_SECP192K1:
*bits = 192;
return( PSA_ECC_FAMILY_SECP_K1 );
case MBEDTLS_ECP_DP_SECP224K1:
*bits = 224;
return( PSA_ECC_FAMILY_SECP_K1 );
case MBEDTLS_ECP_DP_SECP256K1:
*bits = 256;
return( PSA_ECC_FAMILY_SECP_K1 );
case MBEDTLS_ECP_DP_CURVE448:
*bits = 448;
return( PSA_ECC_FAMILY_MONTGOMERY );
default:
*bits = 0;
return( 0 );
}
}
/** Convert an ECC curve identifier from the PSA encoding to Mbed TLS.
*
* \note This function is provided solely for the convenience of
* Mbed TLS and may be removed at any time without notice.
*
* \param curve A PSA elliptic curve identifier
* (`PSA_ECC_FAMILY_xxx`).
* \param bits The bit-length of a private key on \p curve.
* \param bits_is_sloppy If true, \p bits may be the bit-length rounded up
* to the nearest multiple of 8. This allows the caller
* to infer the exact curve from the length of a key
* which is supplied as a byte string.
*
* \return The corresponding Mbed TLS elliptic curve identifier
* (`MBEDTLS_ECP_DP_xxx`).
* \return #MBEDTLS_ECP_DP_NONE if \c curve is not recognized.
* \return #MBEDTLS_ECP_DP_NONE if \p bits is not
* correct for \p curve.
*/
mbedtls_ecp_group_id mbedtls_ecc_group_of_psa( psa_ecc_family_t curve,
size_t bits,
int bits_is_sloppy );
#endif /* MBEDTLS_ECP_C */
/**@}*/
/** \defgroup psa_external_rng External random generator
* @{
*/
#if defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG)
/** External random generator function, implemented by the platform.
*
* When the compile-time option #MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG is enabled,
* this function replaces Mbed TLS's entropy and DRBG modules for all
* random generation triggered via PSA crypto interfaces.
*
* \note This random generator must deliver random numbers with cryptographic
* quality and high performance. It must supply unpredictable numbers
* with a uniform distribution. The implementation of this function
* is responsible for ensuring that the random generator is seeded
* with sufficient entropy. If you have a hardware TRNG which is slow
* or delivers non-uniform output, declare it as an entropy source
* with mbedtls_entropy_add_source() instead of enabling this option.
*
* \param[in,out] context Pointer to the random generator context.
* This is all-bits-zero on the first call
* and preserved between successive calls.
* \param[out] output Output buffer. On success, this buffer
* contains random data with a uniform
* distribution.
* \param output_size The size of the \p output buffer in bytes.
* \param[out] output_length On success, set this value to \p output_size.
*
* \retval #PSA_SUCCESS
* Success. The output buffer contains \p output_size bytes of
* cryptographic-quality random data, and \c *output_length is
* set to \p output_size.
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* The random generator requires extra entropy and there is no
* way to obtain entropy under current environment conditions.
* This error should not happen under normal circumstances since
* this function is responsible for obtaining as much entropy as
* it needs. However implementations of this function may return
* #PSA_ERROR_INSUFFICIENT_ENTROPY if there is no way to obtain
* entropy without blocking indefinitely.
* \retval #PSA_ERROR_HARDWARE_FAILURE
* A failure of the random generator hardware that isn't covered
* by #PSA_ERROR_INSUFFICIENT_ENTROPY.
*/
psa_status_t mbedtls_psa_external_get_random(
mbedtls_psa_external_random_context_t *context,
uint8_t *output, size_t output_size, size_t *output_length );
#endif /* MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */
/**@}*/
/** \defgroup psa_builtin_keys Built-in keys
* @{
*/
/** The minimum value for a key identifier that is built into the
* implementation.
*
* The range of key identifiers from #MBEDTLS_PSA_KEY_ID_BUILTIN_MIN
* to #MBEDTLS_PSA_KEY_ID_BUILTIN_MAX within the range from
* #PSA_KEY_ID_VENDOR_MIN and #PSA_KEY_ID_VENDOR_MAX and must not intersect
* with any other set of implementation-chosen key identifiers.
*
* This value is part of the library's ABI since changing it would invalidate
* the values of built-in key identifiers in applications.
*/
#define MBEDTLS_PSA_KEY_ID_BUILTIN_MIN ((psa_key_id_t)0x7fff0000)
/** The maximum value for a key identifier that is built into the
* implementation.
*
* See #MBEDTLS_PSA_KEY_ID_BUILTIN_MIN for more information.
*/
#define MBEDTLS_PSA_KEY_ID_BUILTIN_MAX ((psa_key_id_t)0x7fffefff)
/** A slot number identifying a key in a driver.
*
* Values of this type are used to identify built-in keys.
*/
typedef uint64_t psa_drv_slot_number_t;
#if defined(MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS)
/** Test whether a key identifier belongs to the builtin key range.
*
* \param key_id Key identifier to test.
*
* \retval 1
* The key identifier is a builtin key identifier.
* \retval 0
* The key identifier is not a builtin key identifier.
*/
static inline int psa_key_id_is_builtin( psa_key_id_t key_id )
{
return( ( key_id >= MBEDTLS_PSA_KEY_ID_BUILTIN_MIN ) &&
( key_id <= MBEDTLS_PSA_KEY_ID_BUILTIN_MAX ) );
}
/** Platform function to obtain the location and slot number of a built-in key.
*
* An application-specific implementation of this function must be provided if
* #MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS is enabled. This would typically be provided
* as part of a platform's system image.
*
* #MBEDTLS_SVC_KEY_ID_GET_KEY_ID(\p key_id) needs to be in the range from
* #MBEDTLS_PSA_KEY_ID_BUILTIN_MIN to #MBEDTLS_PSA_KEY_ID_BUILTIN_MAX.
*
* In a multi-application configuration
* (\c MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER is defined),
* this function should check that #MBEDTLS_SVC_KEY_ID_GET_OWNER_ID(\p key_id)
* is allowed to use the given key.
*
* \param key_id The key ID for which to retrieve the
* location and slot attributes.
* \param[out] lifetime On success, the lifetime associated with the key
* corresponding to \p key_id. Lifetime is a
* combination of which driver contains the key,
* and with what persistence level the key is
* intended to be used. If the platform
* implementation does not contain specific
* information about the intended key persistence
* level, the persistence level may be reported as
* #PSA_KEY_PERSISTENCE_DEFAULT.
* \param[out] slot_number On success, the slot number known to the driver
* registered at the lifetime location reported
* through \p lifetime which corresponds to the
* requested built-in key.
*
* \retval #PSA_SUCCESS
* The requested key identifier designates a built-in key.
* In a multi-application configuration, the requested owner
* is allowed to access it.
* \retval #PSA_ERROR_DOES_NOT_EXIST
* The requested key identifier is not a built-in key which is known
* to this function. If a key exists in the key storage with this
* identifier, the data from the storage will be used.
* \return (any other error)
* Any other error is propagated to the function that requested the key.
* Common errors include:
* - #PSA_ERROR_NOT_PERMITTED: the key exists but the requested owner
* is not allowed to access it.
*/
psa_status_t mbedtls_psa_platform_get_builtin_key(
mbedtls_svc_key_id_t key_id,
psa_key_lifetime_t *lifetime,
psa_drv_slot_number_t *slot_number );
#endif /* MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS */
/** @} */
/** \addtogroup crypto_types
* @{
*/
#define PSA_ALG_CATEGORY_PAKE ((psa_algorithm_t)0x0a000000)
/** Whether the specified algorithm is a password-authenticated key exchange.
*
* \param alg An algorithm identifier (value of type #psa_algorithm_t).
*
* \return 1 if \p alg is a password-authenticated key exchange (PAKE)
* algorithm, 0 otherwise.
* This macro may return either 0 or 1 if \p alg is not a supported
* algorithm identifier.
*/
#define PSA_ALG_IS_PAKE(alg) \
(((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_PAKE)
/** The Password-authenticated key exchange by juggling (J-PAKE) algorithm.
*
* This is J-PAKE as defined by RFC 8236, instantiated with the following
* parameters:
*
* - The group can be either an elliptic curve or defined over a finite field.
* - Schnorr NIZK proof as defined by RFC 8235 and using the same group as the
* J-PAKE algorithm.
* - A cryptographic hash function.
*
* To select these parameters and set up the cipher suite, call these functions
* in any order:
*
* \code
* psa_pake_cs_set_algorithm(cipher_suite, PSA_ALG_JPAKE);
* psa_pake_cs_set_primitive(cipher_suite,
* PSA_PAKE_PRIMITIVE(type, family, bits));
* psa_pake_cs_set_hash(cipher_suite, hash);
* \endcode
*
* For more information on how to set a specific curve or field, refer to the
* documentation of the individual \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants.
*
* After initializing a J-PAKE operation, call
*
* \code
* psa_pake_setup(operation, cipher_suite);
* psa_pake_set_user(operation, ...);
* psa_pake_set_peer(operation, ...);
* psa_pake_set_password_key(operation, ...);
* \endcode
*
* The password is provided as a key. This can be the password text itself,
* in an agreed character encoding, or some value derived from the password
* as required by a higher level protocol.
*
* (The implementation converts the key material to a number as described in
* Section 2.3.8 of _SEC 1: Elliptic Curve Cryptography_
* (https://www.secg.org/sec1-v2.pdf), before reducing it modulo \c q. Here
* \c q is order of the group defined by the primitive set in the cipher suite.
* The \c psa_pake_set_password_key() function returns an error if the result
* of the reduction is 0.)
*
* The key exchange flow for J-PAKE is as follows:
* -# To get the first round data that needs to be sent to the peer, call
* \code
* // Get g1
* psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Get the ZKP public key for x1
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Get the ZKP proof for x1
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* // Get g2
* psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Get the ZKP public key for x2
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Get the ZKP proof for x2
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* \endcode
* -# To provide the first round data received from the peer to the operation,
* call
* \code
* // Set g3
* psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Set the ZKP public key for x3
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Set the ZKP proof for x3
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* // Set g4
* psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Set the ZKP public key for x4
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Set the ZKP proof for x4
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* \endcode
* -# To get the second round data that needs to be sent to the peer, call
* \code
* // Get A
* psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Get ZKP public key for x2*s
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Get ZKP proof for x2*s
* psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* \endcode
* -# To provide the second round data received from the peer to the operation,
* call
* \code
* // Set B
* psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...);
* // Set ZKP public key for x4*s
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...);
* // Set ZKP proof for x4*s
* psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...);
* \endcode
* -# To access the shared secret call
* \code
* // Get Ka=Kb=K
* psa_pake_get_implicit_key()
* \endcode
*
* For more information consult the documentation of the individual
* \c PSA_PAKE_STEP_XXX constants.
*
* At this point there is a cryptographic guarantee that only the authenticated
* party who used the same password is able to compute the key. But there is no
* guarantee that the peer is the party it claims to be and was able to do so.
*
* That is, the authentication is only implicit (the peer is not authenticated
* at this point, and no action should be taken that assume that they are - like
* for example accessing restricted files).
*
* To make the authentication explicit there are various methods, see Section 5
* of RFC 8236 for two examples.
*
*/
#define PSA_ALG_JPAKE ((psa_algorithm_t)0x0a000100)
/** @} */
/** \defgroup pake Password-authenticated key exchange (PAKE)
*
* This is a proposed PAKE interface for the PSA Crypto API. It is not part of
* the official PSA Crypto API yet.
*
* \note The content of this section is not part of the stable API and ABI
* of Mbed Crypto and may change arbitrarily from version to version.
* Same holds for the corresponding macros #PSA_ALG_CATEGORY_PAKE and
* #PSA_ALG_JPAKE.
* @{
*/
/** \brief Encoding of the application role of PAKE
*
* Encodes the application's role in the algorithm is being executed. For more
* information see the documentation of individual \c PSA_PAKE_ROLE_XXX
* constants.
*/
typedef uint8_t psa_pake_role_t;
/** Encoding of input and output indicators for PAKE.
*
* Some PAKE algorithms need to exchange more data than just a single key share.
* This type is for encoding additional input and output data for such
* algorithms.
*/
typedef uint8_t psa_pake_step_t;
/** Encoding of the type of the PAKE's primitive.
*
* Values defined by this standard will never be in the range 0x80-0xff.
* Vendors who define additional types must use an encoding in this range.
*
* For more information see the documentation of individual
* \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants.
*/
typedef uint8_t psa_pake_primitive_type_t;
/** \brief Encoding of the family of the primitive associated with the PAKE.
*
* For more information see the documentation of individual
* \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants.
*/
typedef uint8_t psa_pake_family_t;
/** \brief Encoding of the primitive associated with the PAKE.
*
* For more information see the documentation of the #PSA_PAKE_PRIMITIVE macro.
*/
typedef uint32_t psa_pake_primitive_t;
/** A value to indicate no role in a PAKE algorithm.
* This value can be used in a call to psa_pake_set_role() for symmetric PAKE
* algorithms which do not assign roles.
*/
#define PSA_PAKE_ROLE_NONE ((psa_pake_role_t)0x00)
/** The first peer in a balanced PAKE.
*
* Although balanced PAKE algorithms are symmetric, some of them needs an
* ordering of peers for the transcript calculations. If the algorithm does not
* need this, both #PSA_PAKE_ROLE_FIRST and #PSA_PAKE_ROLE_SECOND are
* accepted.
*/
#define PSA_PAKE_ROLE_FIRST ((psa_pake_role_t)0x01)
/** The second peer in a balanced PAKE.
*
* Although balanced PAKE algorithms are symmetric, some of them needs an
* ordering of peers for the transcript calculations. If the algorithm does not
* need this, either #PSA_PAKE_ROLE_FIRST or #PSA_PAKE_ROLE_SECOND are
* accepted.
*/
#define PSA_PAKE_ROLE_SECOND ((psa_pake_role_t)0x02)
/** The client in an augmented PAKE.
*
* Augmented PAKE algorithms need to differentiate between client and server.
*/
#define PSA_PAKE_ROLE_CLIENT ((psa_pake_role_t)0x11)
/** The server in an augmented PAKE.
*
* Augmented PAKE algorithms need to differentiate between client and server.
*/
#define PSA_PAKE_ROLE_SERVER ((psa_pake_role_t)0x12)
/** The PAKE primitive type indicating the use of elliptic curves.
*
* The values of the \c family and \c bits fields of the cipher suite identify a
* specific elliptic curve, using the same mapping that is used for ECC
* (::psa_ecc_family_t) keys.
*
* (Here \c family means the value returned by psa_pake_cs_get_family() and
* \c bits means the value returned by psa_pake_cs_get_bits().)
*
* Input and output during the operation can involve group elements and scalar
* values:
* -# The format for group elements is the same as for public keys on the
* specific curve would be. For more information, consult the documentation of
* psa_export_public_key().
* -# The format for scalars is the same as for private keys on the specific
* curve would be. For more information, consult the documentation of
* psa_export_key().
*/
#define PSA_PAKE_PRIMITIVE_TYPE_ECC ((psa_pake_primitive_type_t)0x01)
/** The PAKE primitive type indicating the use of Diffie-Hellman groups.
*
* The values of the \c family and \c bits fields of the cipher suite identify
* a specific Diffie-Hellman group, using the same mapping that is used for
* Diffie-Hellman (::psa_dh_family_t) keys.
*
* (Here \c family means the value returned by psa_pake_cs_get_family() and
* \c bits means the value returned by psa_pake_cs_get_bits().)
*
* Input and output during the operation can involve group elements and scalar
* values:
* -# The format for group elements is the same as for public keys on the
* specific group would be. For more information, consult the documentation of
* psa_export_public_key().
* -# The format for scalars is the same as for private keys on the specific
* group would be. For more information, consult the documentation of
* psa_export_key().
*/
#define PSA_PAKE_PRIMITIVE_TYPE_DH ((psa_pake_primitive_type_t)0x02)
/** Construct a PAKE primitive from type, family and bit-size.
*
* \param pake_type The type of the primitive
* (value of type ::psa_pake_primitive_type_t).
* \param pake_family The family of the primitive
* (the type and interpretation of this parameter depends
* on \p type, for more information consult the
* documentation of individual ::psa_pake_primitive_type_t
* constants).
* \param pake_bits The bit-size of the primitive
* (Value of type \c size_t. The interpretation
* of this parameter depends on \p family, for more
* information consult the documentation of individual
* ::psa_pake_primitive_type_t constants).
*
* \return The constructed primitive value of type ::psa_pake_primitive_t.
* Return 0 if the requested primitive can't be encoded as
* ::psa_pake_primitive_t.
*/
#define PSA_PAKE_PRIMITIVE(pake_type, pake_family, pake_bits) \
((pake_bits & 0xFFFF) != pake_bits) ? 0 : \
((psa_pake_primitive_t) (((pake_type) << 24 | \
(pake_family) << 16) | (pake_bits)))
/** The key share being sent to or received from the peer.
*
* The format for both input and output at this step is the same as for public
* keys on the group determined by the primitive (::psa_pake_primitive_t) would
* be.
*
* For more information on the format, consult the documentation of
* psa_export_public_key().
*
* For information regarding how the group is determined, consult the
* documentation #PSA_PAKE_PRIMITIVE.
*/
#define PSA_PAKE_STEP_KEY_SHARE ((psa_pake_step_t)0x01)
/** A Schnorr NIZKP public key.
*
* This is the ephemeral public key in the Schnorr Non-Interactive
* Zero-Knowledge Proof (the value denoted by the letter 'V' in RFC 8235).
*
* The format for both input and output at this step is the same as for public
* keys on the group determined by the primitive (::psa_pake_primitive_t) would
* be.
*
* For more information on the format, consult the documentation of
* psa_export_public_key().
*
* For information regarding how the group is determined, consult the
* documentation #PSA_PAKE_PRIMITIVE.
*/
#define PSA_PAKE_STEP_ZK_PUBLIC ((psa_pake_step_t)0x02)
/** A Schnorr NIZKP proof.
*
* This is the proof in the Schnorr Non-Interactive Zero-Knowledge Proof (the
* value denoted by the letter 'r' in RFC 8235).
*
* Both for input and output, the value at this step is an integer less than
* the order of the group selected in the cipher suite. The format depends on
* the group as well:
*
* - For Montgomery curves, the encoding is little endian.
* - For everything else the encoding is big endian (see Section 2.3.8 of
* _SEC 1: Elliptic Curve Cryptography_ at https://www.secg.org/sec1-v2.pdf).
*
* In both cases leading zeroes are allowed as long as the length in bytes does
* not exceed the byte length of the group order.
*
* For information regarding how the group is determined, consult the
* documentation #PSA_PAKE_PRIMITIVE.
*/
#define PSA_PAKE_STEP_ZK_PROOF ((psa_pake_step_t)0x03)
/** The type of the data structure for PAKE cipher suites.
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure.
* Implementation details can change in future versions without notice.
*/
typedef struct psa_pake_cipher_suite_s psa_pake_cipher_suite_t;
/** Return an initial value for a PAKE cipher suite object.
*/
static psa_pake_cipher_suite_t psa_pake_cipher_suite_init( void );
/** Retrieve the PAKE algorithm from a PAKE cipher suite.
*
* \param[in] cipher_suite The cipher suite structure to query.
*
* \return The PAKE algorithm stored in the cipher suite structure.
*/
static psa_algorithm_t psa_pake_cs_get_algorithm(
const psa_pake_cipher_suite_t *cipher_suite );
/** Declare the PAKE algorithm for the cipher suite.
*
* This function overwrites any PAKE algorithm
* previously set in \p cipher_suite.
*
* \param[out] cipher_suite The cipher suite structure to write to.
* \param algorithm The PAKE algorithm to write.
* (`PSA_ALG_XXX` values of type ::psa_algorithm_t
* such that #PSA_ALG_IS_PAKE(\c alg) is true.)
* If this is 0, the PAKE algorithm in
* \p cipher_suite becomes unspecified.
*/
static void psa_pake_cs_set_algorithm( psa_pake_cipher_suite_t *cipher_suite,
psa_algorithm_t algorithm );
/** Retrieve the primitive from a PAKE cipher suite.
*
* \param[in] cipher_suite The cipher suite structure to query.
*
* \return The primitive stored in the cipher suite structure.
*/
static psa_pake_primitive_t psa_pake_cs_get_primitive(
const psa_pake_cipher_suite_t *cipher_suite );
/** Declare the primitive for a PAKE cipher suite.
*
* This function overwrites any primitive previously set in \p cipher_suite.
*
* \param[out] cipher_suite The cipher suite structure to write to.
* \param primitive The primitive to write. If this is 0, the
* primitive type in \p cipher_suite becomes
* unspecified.
*/
static void psa_pake_cs_set_primitive( psa_pake_cipher_suite_t *cipher_suite,
psa_pake_primitive_t primitive );
/** Retrieve the PAKE family from a PAKE cipher suite.
*
* \param[in] cipher_suite The cipher suite structure to query.
*
* \return The PAKE family stored in the cipher suite structure.
*/
static psa_pake_family_t psa_pake_cs_get_family(
const psa_pake_cipher_suite_t *cipher_suite );
/** Retrieve the PAKE primitive bit-size from a PAKE cipher suite.
*
* \param[in] cipher_suite The cipher suite structure to query.
*
* \return The PAKE primitive bit-size stored in the cipher suite structure.
*/
static uint16_t psa_pake_cs_get_bits(
const psa_pake_cipher_suite_t *cipher_suite );
/** Retrieve the hash algorithm from a PAKE cipher suite.
*
* \param[in] cipher_suite The cipher suite structure to query.
*
* \return The hash algorithm stored in the cipher suite structure. The return
* value is 0 if the PAKE is not parametrised by a hash algorithm or if
* the hash algorithm is not set.
*/
static psa_algorithm_t psa_pake_cs_get_hash(
const psa_pake_cipher_suite_t *cipher_suite );
/** Declare the hash algorithm for a PAKE cipher suite.
*
* This function overwrites any hash algorithm
* previously set in \p cipher_suite.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* \param[out] cipher_suite The cipher suite structure to write to.
* \param hash The hash involved in the cipher suite.
* (`PSA_ALG_XXX` values of type ::psa_algorithm_t
* such that #PSA_ALG_IS_HASH(\c alg) is true.)
* If this is 0, the hash algorithm in
* \p cipher_suite becomes unspecified.
*/
static void psa_pake_cs_set_hash( psa_pake_cipher_suite_t *cipher_suite,
psa_algorithm_t hash );
/** The type of the state data structure for PAKE operations.
*
* Before calling any function on a PAKE operation object, the application
* must initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_pake_operation_t operation;
* memset(&operation, 0, sizeof(operation));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_pake_operation_t operation = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_PAKE_OPERATION_INIT,
* for example:
* \code
* psa_pake_operation_t operation = PSA_PAKE_OPERATION_INIT;
* \endcode
* - Assign the result of the function psa_pake_operation_init()
* to the structure, for example:
* \code
* psa_pake_operation_t operation;
* operation = psa_pake_operation_init();
* \endcode
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure.
* Implementation details can change in future versions without notice. */
typedef struct psa_pake_operation_s psa_pake_operation_t;
/** Return an initial value for an PAKE operation object.
*/
static psa_pake_operation_t psa_pake_operation_init( void );
/** Set the session information for a password-authenticated key exchange.
*
* The sequence of operations to set up a password-authenticated key exchange
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_pake_operation_t, e.g.
* #PSA_PAKE_OPERATION_INIT.
* -# Call psa_pake_setup() to specify the cipher suite.
* -# Call \c psa_pake_set_xxx() functions on the operation to complete the
* setup. The exact sequence of \c psa_pake_set_xxx() functions that needs
* to be called depends on the algorithm in use.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* A typical sequence of calls to perform a password-authenticated key
* exchange:
* -# Call psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...) to get the
* key share that needs to be sent to the peer.
* -# Call psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...) to provide
* the key share that was received from the peer.
* -# Depending on the algorithm additional calls to psa_pake_output() and
* psa_pake_input() might be necessary.
* -# Call psa_pake_get_implicit_key() for accessing the shared secret.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* If an error occurs at any step after a call to psa_pake_setup(),
* the operation will need to be reset by a call to psa_pake_abort(). The
* application may call psa_pake_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_pake_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A call to psa_pake_abort().
* - A successful call to psa_pake_get_implicit_key().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized but not set up yet.
* \param[in] cipher_suite The cipher suite to use. (A cipher suite fully
* characterizes a PAKE algorithm and determines
* the algorithm as well.)
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The algorithm in \p cipher_suite is not a PAKE algorithm, or the
* PAKE primitive in \p cipher_suite is not compatible with the
* PAKE algorithm, or the hash algorithm in \p cipher_suite is invalid
* or not compatible with the PAKE algorithm and primitive.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The algorithm in \p cipher_suite is not a supported PAKE algorithm,
* or the PAKE primitive in \p cipher_suite is not supported or not
* compatible with the PAKE algorithm, or the hash algorithm in
* \p cipher_suite is not supported or not compatible with the PAKE
* algorithm and primitive.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid, or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_setup( psa_pake_operation_t *operation,
const psa_pake_cipher_suite_t *cipher_suite );
/** Set the password for a password-authenticated key exchange from key ID.
*
* Call this function when the password, or a value derived from the password,
* is already present in the key store.
*
* \param[in,out] operation The operation object to set the password for. It
* must have been set up by psa_pake_setup() and
* not yet in use (neither psa_pake_output() nor
* psa_pake_input() has been called yet). It must
* be on operation for which the password hasn't
* been set yet (psa_pake_set_password_key()
* hasn't been called yet).
* \param password Identifier of the key holding the password or a
* value derived from the password (eg. by a
* memory-hard function). It must remain valid
* until the operation terminates. It must be of
* type #PSA_KEY_TYPE_PASSWORD or
* #PSA_KEY_TYPE_PASSWORD_HASH. It has to allow
* the usage #PSA_KEY_USAGE_DERIVE.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \p password is not a valid key identifier.
* \retval #PSA_ERROR_NOT_PERMITTED
* The key does not have the #PSA_KEY_USAGE_DERIVE flag, or it does not
* permit the \p operation's algorithm.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key type for \p password is not #PSA_KEY_TYPE_PASSWORD or
* #PSA_KEY_TYPE_PASSWORD_HASH, or \p password is not compatible with
* the \p operation's cipher suite.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The key type or key size of \p password is not supported with the
* \p operation's cipher suite.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_STORAGE_FAILURE
* \retval #PSA_ERROR_DATA_CORRUPT
* \retval #PSA_ERROR_DATA_INVALID
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must have been set up.), or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_set_password_key( psa_pake_operation_t *operation,
mbedtls_svc_key_id_t password );
/** Set the user ID for a password-authenticated key exchange.
*
* Call this function to set the user ID. For PAKE algorithms that associate a
* user identifier with each side of the session you need to call
* psa_pake_set_peer() as well. For PAKE algorithms that associate a single
* user identifier with the session, call psa_pake_set_user() only.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* \param[in,out] operation The operation object to set the user ID for. It
* must have been set up by psa_pake_setup() and
* not yet in use (neither psa_pake_output() nor
* psa_pake_input() has been called yet). It must
* be on operation for which the user ID hasn't
* been set (psa_pake_set_user() hasn't been
* called yet).
* \param[in] user_id The user ID to authenticate with.
* \param user_id_len Size of the \p user_id buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p user_id is not valid for the \p operation's algorithm and cipher
* suite.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The value of \p user_id is not supported by the implementation.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid, or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_set_user( psa_pake_operation_t *operation,
const uint8_t *user_id,
size_t user_id_len );
/** Set the peer ID for a password-authenticated key exchange.
*
* Call this function in addition to psa_pake_set_user() for PAKE algorithms
* that associate a user identifier with each side of the session. For PAKE
* algorithms that associate a single user identifier with the session, call
* psa_pake_set_user() only.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* \param[in,out] operation The operation object to set the peer ID for. It
* must have been set up by psa_pake_setup() and
* not yet in use (neither psa_pake_output() nor
* psa_pake_input() has been called yet). It must
* be on operation for which the peer ID hasn't
* been set (psa_pake_set_peer() hasn't been
* called yet).
* \param[in] peer_id The peer's ID to authenticate.
* \param peer_id_len Size of the \p peer_id buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p user_id is not valid for the \p operation's algorithm and cipher
* suite.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The algorithm doesn't associate a second identity with the session.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* Calling psa_pake_set_peer() is invalid with the \p operation's
* algorithm, the operation state is not valid, or the library has not
* been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_set_peer( psa_pake_operation_t *operation,
const uint8_t *peer_id,
size_t peer_id_len );
/** Set the application role for a password-authenticated key exchange.
*
* Not all PAKE algorithms need to differentiate the communicating entities.
* It is optional to call this function for PAKEs that don't require a role
* to be specified. For such PAKEs the application role parameter is ignored,
* or #PSA_PAKE_ROLE_NONE can be passed as \c role.
*
* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX`
* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true)
* for more information.
*
* \param[in,out] operation The operation object to specify the
* application's role for. It must have been set up
* by psa_pake_setup() and not yet in use (neither
* psa_pake_output() nor psa_pake_input() has been
* called yet). It must be on operation for which
* the application's role hasn't been specified
* (psa_pake_set_role() hasn't been called yet).
* \param role A value of type ::psa_pake_role_t indicating the
* application's role in the PAKE the algorithm
* that is being set up. For more information see
* the documentation of \c PSA_PAKE_ROLE_XXX
* constants.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The \p role is not a valid PAKE role in the \p operation’s algorithm.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The \p role for this algorithm is not supported or is not valid.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid, or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_set_role( psa_pake_operation_t *operation,
psa_pake_role_t role );
/** Get output for a step of a password-authenticated key exchange.
*
* Depending on the algorithm being executed, you might need to call this
* function several times or you might not need to call this at all.
*
* The exact sequence of calls to perform a password-authenticated key
* exchange depends on the algorithm in use. Refer to the documentation of
* individual PAKE algorithm types (`PSA_ALG_XXX` values of type
* ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more
* information.
*
* If this function returns an error status, the operation enters an error
* state and must be aborted by calling psa_pake_abort().
*
* \param[in,out] operation Active PAKE operation.
* \param step The step of the algorithm for which the output is
* requested.
* \param[out] output Buffer where the output is to be written in the
* format appropriate for this \p step. Refer to
* the documentation of the individual
* \c PSA_PAKE_STEP_XXX constants for more
* information.
* \param output_size Size of the \p output buffer in bytes. This must
* be at least #PSA_PAKE_OUTPUT_SIZE(\p alg, \p
* primitive, \p step) where \p alg and
* \p primitive are the PAKE algorithm and primitive
* in the operation's cipher suite, and \p step is
* the output step.
*
* \param[out] output_length On success, the number of bytes of the returned
* output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p step is not compatible with the operation's algorithm.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p step is not supported with the operation's algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_STORAGE_FAILURE
* \retval #PSA_ERROR_DATA_CORRUPT
* \retval #PSA_ERROR_DATA_INVALID
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be active, and fully set
* up, and this call must conform to the algorithm's requirements
* for ordering of input and output steps), or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_output( psa_pake_operation_t *operation,
psa_pake_step_t step,
uint8_t *output,
size_t output_size,
size_t *output_length );
/** Provide input for a step of a password-authenticated key exchange.
*
* Depending on the algorithm being executed, you might need to call this
* function several times or you might not need to call this at all.
*
* The exact sequence of calls to perform a password-authenticated key
* exchange depends on the algorithm in use. Refer to the documentation of
* individual PAKE algorithm types (`PSA_ALG_XXX` values of type
* ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more
* information.
*
* If this function returns an error status, the operation enters an error
* state and must be aborted by calling psa_pake_abort().
*
* \param[in,out] operation Active PAKE operation.
* \param step The step for which the input is provided.
* \param[in] input Buffer containing the input in the format
* appropriate for this \p step. Refer to the
* documentation of the individual
* \c PSA_PAKE_STEP_XXX constants for more
* information.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The verification fails for a #PSA_PAKE_STEP_ZK_PROOF input step.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p is not compatible with the \p operation’s algorithm, or the
* \p input is not valid for the \p operation's algorithm, cipher suite
* or \p step.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p step p is not supported with the \p operation's algorithm, or the
* \p input is not supported for the \p operation's algorithm, cipher
* suite or \p step.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_STORAGE_FAILURE
* \retval #PSA_ERROR_DATA_CORRUPT
* \retval #PSA_ERROR_DATA_INVALID
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be active, and fully set
* up, and this call must conform to the algorithm's requirements
* for ordering of input and output steps), or
* the library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_input( psa_pake_operation_t *operation,
psa_pake_step_t step,
const uint8_t *input,
size_t input_length );
/** Get implicitly confirmed shared secret from a PAKE.
*
* At this point there is a cryptographic guarantee that only the authenticated
* party who used the same password is able to compute the key. But there is no
* guarantee that the peer is the party it claims to be and was able to do so.
*
* That is, the authentication is only implicit. Since the peer is not
* authenticated yet, no action should be taken yet that assumes that the peer
* is who it claims to be. For example, do not access restricted files on the
* peer's behalf until an explicit authentication has succeeded.
*
* This function can be called after the key exchange phase of the operation
* has completed. It imports the shared secret output of the PAKE into the
* provided derivation operation. The input step
* #PSA_KEY_DERIVATION_INPUT_SECRET is used when placing the shared key
* material in the key derivation operation.
*
* The exact sequence of calls to perform a password-authenticated key
* exchange depends on the algorithm in use. Refer to the documentation of
* individual PAKE algorithm types (`PSA_ALG_XXX` values of type
* ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more
* information.
*
* When this function returns successfully, \p operation becomes inactive.
* If this function returns an error status, both \p operation
* and \p key_derivation operations enter an error state and must be aborted by
* calling psa_pake_abort() and psa_key_derivation_abort() respectively.
*
* \param[in,out] operation Active PAKE operation.
* \param[out] output A key derivation operation that is ready
* for an input step of type
* #PSA_KEY_DERIVATION_INPUT_SECRET.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* #PSA_KEY_DERIVATION_INPUT_SECRET is not compatible with the
* algorithm in the \p output key derivation operation.
* \retval #PSA_ERROR_NOT_SUPPORTED
* Input from a PAKE is not supported by the algorithm in the \p output
* key derivation operation.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_STORAGE_FAILURE
* \retval #PSA_ERROR_DATA_CORRUPT
* \retval #PSA_ERROR_DATA_INVALID
* \retval #PSA_ERROR_BAD_STATE
* The PAKE operation state is not valid (it must be active, but beyond
* that validity is specific to the algorithm), or
* the library has not been previously initialized by psa_crypto_init(),
* or the state of \p output is not valid for
* the #PSA_KEY_DERIVATION_INPUT_SECRET step. This can happen if the
* step is out of order or the application has done this step already
* and it may not be repeated.
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_get_implicit_key( psa_pake_operation_t *operation,
psa_key_derivation_operation_t *output );
/** Abort a PAKE operation.
*
* Aborting an operation frees all associated resources except for the \c
* operation structure itself. Once aborted, the operation object can be reused
* for another operation by calling psa_pake_setup() again.
*
* This function may be called at any time after the operation
* object has been initialized as described in #psa_pake_operation_t.
*
* In particular, calling psa_pake_abort() after the operation has been
* terminated by a call to psa_pake_abort() or psa_pake_get_implicit_key()
* is safe and has no effect.
*
* \param[in,out] operation The operation to abort.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_pake_abort( psa_pake_operation_t * operation );
/**@}*/
/** A sufficient output buffer size for psa_pake_output().
*
* If the size of the output buffer is at least this large, it is guaranteed
* that psa_pake_output() will not fail due to an insufficient output buffer
* size. The actual size of the output might be smaller in any given call.
*
* See also #PSA_PAKE_OUTPUT_MAX_SIZE
*
* \param alg A PAKE algorithm (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_PAKE(\p alg) is true).
* \param primitive A primitive of type ::psa_pake_primitive_t that is
* compatible with algorithm \p alg.
* \param output_step A value of type ::psa_pake_step_t that is valid for the
* algorithm \p alg.
* \return A sufficient output buffer size for the specified
* PAKE algorithm, primitive, and output step. If the
* PAKE algorithm, primitive, or output step is not
* recognized, or the parameters are incompatible,
* return 0.
*/
#define PSA_PAKE_OUTPUT_SIZE(alg, primitive, output_step) 0
/** A sufficient input buffer size for psa_pake_input().
*
* The value returned by this macro is guaranteed to be large enough for any
* valid input to psa_pake_input() in an operation with the specified
* parameters.
*
* See also #PSA_PAKE_INPUT_MAX_SIZE
*
* \param alg A PAKE algorithm (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_PAKE(\p alg) is true).
* \param primitive A primitive of type ::psa_pake_primitive_t that is
* compatible with algorithm \p alg.
* \param input_step A value of type ::psa_pake_step_t that is valid for the
* algorithm \p alg.
* \return A sufficient input buffer size for the specified
* input, cipher suite and algorithm. If the cipher suite,
* the input type or PAKE algorithm is not recognized, or
* the parameters are incompatible, return 0.
*/
#define PSA_PAKE_INPUT_SIZE(alg, primitive, input_step) 0
/** Output buffer size for psa_pake_output() for any of the supported PAKE
* algorithm and primitive suites and output step.
*
* This macro must expand to a compile-time constant integer.
*
* See also #PSA_PAKE_OUTPUT_SIZE(\p alg, \p primitive, \p step).
*/
#define PSA_PAKE_OUTPUT_MAX_SIZE 0
/** Input buffer size for psa_pake_input() for any of the supported PAKE
* algorithm and primitive suites and input step.
*
* This macro must expand to a compile-time constant integer.
*
* See also #PSA_PAKE_INPUT_SIZE(\p alg, \p primitive, \p step).
*/
#define PSA_PAKE_INPUT_MAX_SIZE 0
/** Returns a suitable initializer for a PAKE cipher suite object of type
* psa_pake_cipher_suite_t.
*/
#define PSA_PAKE_CIPHER_SUITE_INIT {PSA_ALG_NONE, 0, 0, 0, PSA_ALG_NONE}
/** Returns a suitable initializer for a PAKE operation object of type
* psa_pake_operation_t.
*/
#define PSA_PAKE_OPERATION_INIT {PSA_ALG_NONE, {0}}
struct psa_pake_cipher_suite_s
{
psa_algorithm_t algorithm;
psa_pake_primitive_type_t type;
psa_pake_family_t family;
uint16_t bits;
psa_algorithm_t hash;
};
static inline psa_algorithm_t psa_pake_cs_get_algorithm(
const psa_pake_cipher_suite_t *cipher_suite )
{
return( cipher_suite->algorithm );
}
static inline void psa_pake_cs_set_algorithm(
psa_pake_cipher_suite_t *cipher_suite,
psa_algorithm_t algorithm)
{
if( !PSA_ALG_IS_PAKE( algorithm ) )
cipher_suite->algorithm = 0;
else
cipher_suite->algorithm = algorithm;
}
static inline psa_pake_primitive_t psa_pake_cs_get_primitive(
const psa_pake_cipher_suite_t *cipher_suite )
{
return( PSA_PAKE_PRIMITIVE( cipher_suite->type, cipher_suite->family,
cipher_suite->bits ) );
}
static inline void psa_pake_cs_set_primitive(
psa_pake_cipher_suite_t *cipher_suite,
psa_pake_primitive_t primitive )
{
cipher_suite->type = (psa_pake_primitive_type_t) (primitive >> 24);
cipher_suite->family = (psa_pake_family_t) (0xFF & (primitive >> 16));
cipher_suite->bits = (uint16_t) (0xFFFF & primitive);
}
static inline psa_pake_family_t psa_pake_cs_get_family(
const psa_pake_cipher_suite_t *cipher_suite )
{
return( cipher_suite->family );
}
static inline uint16_t psa_pake_cs_get_bits(
const psa_pake_cipher_suite_t *cipher_suite )
{
return( cipher_suite->bits );
}
static inline psa_algorithm_t psa_pake_cs_get_hash(
const psa_pake_cipher_suite_t *cipher_suite )
{
return( cipher_suite->hash );
}
static inline void psa_pake_cs_set_hash( psa_pake_cipher_suite_t *cipher_suite,
psa_algorithm_t hash )
{
if( !PSA_ALG_IS_HASH( hash ) )
cipher_suite->hash = 0;
else
cipher_suite->hash = hash;
}
struct psa_pake_operation_s
{
psa_algorithm_t alg;
union
{
/* Make the union non-empty even with no supported algorithms. */
uint8_t dummy;
} ctx;
};
static inline struct psa_pake_cipher_suite_s psa_pake_cipher_suite_init( void )
{
const struct psa_pake_cipher_suite_s v = PSA_PAKE_CIPHER_SUITE_INIT;
return( v );
}
static inline struct psa_pake_operation_s psa_pake_operation_init( void )
{
const struct psa_pake_operation_s v = PSA_PAKE_OPERATION_INIT;
return( v );
}
#ifdef __cplusplus
}
#endif
#endif /* PSA_CRYPTO_EXTRA_H */
Reference in New Issue View Git Blame Copy Permalink