mirror/DHT-sensor-library
1
0
Fork 0
mirror of https://github.com/adafruit/DHT-sensor-library.git synced 2023-10-23 22:20:38 +03:00
Code Issues Projects Releases Wiki Activity
127 Commits 3 Branches 24 Tags 417 KiB
fa22bc6ca4
Commit Graph

62 Commits

Author SHA1 Message Date
Limor "Ladyada" Fried
8de033bae1
Merge pull request #159 from Rotzbua/patch-1 
Fix compiler warning unused parameter...
 2020-05-21 12:16:14 -04:00
Rotzbua
a7157aa586
Fix compiler warning unused parameter... 
...'count' [-Wunused-parameter]
 2020-05-21 18:02:10 +02:00
Rotzbua
d0a1035985
Fix compiler warning: comparison between signed... 
... and unsigned integer expressions [-Wsign-compare]
 2020-05-21 14:29:08 +02:00
Rotzbua
7528a843dd
Fix compiler warning: comparison between signed... 
... and unsigned integer expressions [-Wsign-compare]
 2020-05-21 14:21:00 +02:00
Rotzbua
5ce3bce49c
Fix compiler warning: comparison between signed... 
... and unsigned integer expressions [-Wsign-compare]
 2020-05-21 06:28:03 +02:00
Rotzbua
44a80e01e6
Fix compiler warning unused parameter... 
...'count' [-Wunused-parameter]
 2020-05-21 06:19:11 +02:00
siddacious
5d60b0d3f0 actionified, formatted and doxy'd 2020-04-08 11:37:24 -07:00
Jan Hoffmann
dd455428a0 documented DHT 2019-07-04 17:06:42 +02:00
matthiasdanner
6332774b18
removed double conversion to Celsius 2019-04-17 20:01:26 +02:00
Phillip Burgess
f566d58f47 Move ESP8266 yield() out of InterruptLock 2019-02-18 10:20:28 -08:00
Phillip Burgess
7cec0cb06d Configurable pullup delay time, default 55 usec 2019-02-14 09:24:17 -08:00
Simon IJskes
8b9624479e removed '*' copy error. 2019-02-11 12:33:06 +01:00
Simon IJskes
57fe95c1be split off the DHT11 conversion, corrected the algorithm for temperatures below 0 degrees celsius. 2019-02-08 22:18:10 +01:00
Phillip Burgess
d6488c1fbe Change initial HIGH delay, fix comments in examples 2019-01-28 17:05:54 -08:00
Phillip Burgess
01490aa8de Vary delay by sensor type a la PR #70 2019-01-11 17:24:16 -08:00
Phillip Burgess
bdd2756ed1 Fix computeHeatIndex declaration, check F_CPU in expectPulse 2019-01-11 16:47:34 -08:00
Paint Your Dragon
07da1cd001
Merge pull request #91 from chelmi/master 
Fix for slower boards. Use uint16_t in expectPulse loop to increase sampling rate
 2019-01-11 16:41:47 -08:00
Paint Your Dragon
b3b0b08d6d
Merge pull request #115 from owenduffy/master 
Fix timing and pin mode change to comply with datasheet.
 2019-01-11 16:34:29 -08:00
Paint Your Dragon
bf86a4068c
Merge pull request #112 from SConaway/patch-1 
Read Temp and Humidity if not specified
 2019-01-11 16:33:11 -08:00
Phillip Burgess
f8d3497fac "Better Debug Information" via Driver55 PR #110 2019-01-11 16:31:02 -08:00
Paint Your Dragon
efcca31a7f
Merge pull request #108 from qub1750ul/master 
Use bool instead of boolean
 2019-01-11 16:23:45 -08:00
Paint Your Dragon
fa129747e8
Merge pull request #95 from fanthos/master 
Add support for DHT12.
 2019-01-11 16:22:00 -08:00
Paint Your Dragon
dff65098bb
Merge pull request #82 from adams13x13/patch-1 
Fixes #81 Distinguish "signal already there" from "timeout"
 2019-01-11 16:18:37 -08:00
Paint Your Dragon
73409c143c
Merge pull request #76 from terryjmyers/patch-1 
Modified read speed
 2019-01-11 16:15:14 -08:00
Paint Your Dragon
5550a040c2
Merge pull request #61 from 7eggert/master 
Save 66 bytes by using integer arithmetric
 2019-01-11 16:05:29 -08:00
Paint Your Dragon
dc71b006b6
Merge pull request #52 from Spacefish/master 
Use MIN_INTERVAL define instead of hardcoded value
 2019-01-11 16:02:07 -08:00
W12\owen
b429942ce8 Fix timing and pin mode change to comply with datasheet. 2018-09-24 06:20:01 +10:00
Steven Conaway
2dfa77993d
Update DHT.cpp 2018-07-30 11:31:34 -07:00
Steven Conaway
6b8b1ccdb9
Update DHT.cpp 2018-07-30 11:23:35 -07:00
Giuseppe Masino
3bba771f8c Changed boolean to bool 2018-06-27 19:18:17 +02:00
Boyi C
a607a50475 Add support for DHT12. 
Change DHT11 temperature resolution to 0.1 instead of 1.
 2017-12-12 14:20:26 +08:00
Michel Metzger
b07db5af21 Fix for slower boards. Use uint16_t in expectPulse loop to increase sampling rate and avoid bad readings. 
Tested on atmega328 @ 8MHz and Feather M0 @ 48MHz
 2017-11-02 22:53:50 -04:00
adams13x13
761f4f4fb9 Fixes #81 "signal already there" != "timeout" 
If expectPulse(LOW) sees the port is already LOW (result == 0), this is not timeout!
 2017-09-02 20:15:19 +02:00
Terry J Myers
16e61f1084 Modified read speed 
Reduced delay times from 250ms and 20ms to 1ms.  This was done in accordance with the datasheet.  E.G. no where does it say you need to wait 250ms or 20ms.  It does say to set the line high for a minimum of 1ms (the second delay).  This has been tested and is working in my of my projects
 2017-04-09 19:35:04 -04:00
Bodo Eggert
519393f42e Save 66 bytes by using integer arithmetric 2016-09-08 17:11:29 +02:00
Timo Witte
cad6977ba8 fix initilization of _lastreadtime 2015-12-27 02:47:09 +01:00
Spacefish
53375d8d70 Use MIN_INTERVAL define instead of hardcoded value 2015-12-26 22:32:34 +01:00
JongHo Lim
89937d5d25 mod readHumidity(). using parameter 'force' 2015-11-29 22:27:43 +09:00
Tony DiCola
15020aa891 Fix #44 by conditionally excluding unused port and bitmask state on non-AVR platforms. 2015-10-12 21:30:01 -07:00
Tony DiCola
ce3190f65c Switch back to integer division in array indexing. 2015-10-12 18:37:54 -07:00
J.M. Dana
5bc0a5c796 Divisions turned into multiplications 
As correctly stated by Mausy5043, the division is quite slow in most
microcontrollers, so I have replaced them with multiplications.
 2015-10-06 23:42:19 +01:00
J.M. Dana
51a8b814ac Divisions have been replaced by multiplications. 2015-10-03 13:42:09 +01:00
J.M. Dana
36fb16274b DHT::computeHeatIndex has been modified so it uses both Rothfusz and 
Steadman's equations. As a result, it allows a larger range of
temperatures and more accurate results for extreme conditions.
 2015-10-02 21:50:43 +01:00
Matthijs Kooijman
f9c3f323e3 Use INPUT_PULLUP 
Previously, the mode was configured to INPUT and then written HIGH,
which works on AVR but isn't very portable. Instead, this uses the
INPUT_PULLUP pin mode (available since Arduino 1.0.1) which is portable.
 2015-07-24 21:44:41 +02:00
Matthijs Kooijman
5973929e63 Remove the firstreading variable 
By cleverly setting _lastreadtime in begin() to make sure that it looks
like the last read was alrady 2000 ms ago, even on startup when millis()
still returns 0, there is no longer a need to keep a separate
firstreading variable, saving a byte of memory and a bit of code.
 2015-07-24 21:42:58 +02:00
Matthijs Kooijman
f1b79028ea Clean up two-second interval check 
There was some handling of millis() overflow that is not needed.
Standard unsigned subtraction and wraparound already works as expected,
so this extra check can be removed (it even hurts, since it introduces 2
seconds after a wraparound where no new data will be read, even if it
could otherwise happen).

Also, this prevents calling millis() a second time, since its value is
already known.
 2015-07-24 21:41:19 +02:00
Matthijs Kooijman
04905bc5cd Add force parameter to read methods 
This allows forcing a read, even if the previous read was less than 2
seconds ago. This is useful in cases where the millis() timer is not
reliable, such as when sleeping. In this case, it is up to the caller to
ensure that at least 2 seconds elapse between calls with force set to
true.
 2015-07-24 21:40:22 +02:00
Tony DiCola
5cd78aead6 Fix merge conflict with interrupt disable lock. 2015-07-22 12:22:35 -07:00
Tony DiCola
85d85170bd Fix #37 by optimizing pulse read to use direct port access on AVR, stops checksum failures from missed signals. 2015-07-22 12:13:56 -07:00
Zirientis
a2208eb813 Cause interrupts to be reenabled if a timeout occurs while waiting for the sensor. 2015-07-01 17:58:17 -07:00