DHT-sensor-library

mirror of https://github.com/adafruit/DHT-sensor-library.git synced 2023-10-23 22:20:38 +03:00

Go to file

Matthijs Kooijman f9c3f323e3 Use INPUT_PULLUP

Previously, the mode was configured to INPUT and then written HIGH,
which works on AVR but isn't very portable. Instead, this uses the
INPUT_PULLUP pin mode (available since Arduino 1.0.1) which is portable.

2015-07-24 21:44:41 +02:00

examples/DHTtester

Fix merge conflicts, make compute heat index default to Fahrenheit to not break old code that assumes default is Fahrenheit.

2015-06-26 15:56:04 -07:00

DHT.cpp

Use INPUT_PULLUP

2015-07-24 21:44:41 +02:00

DHT.h

Shrink DHT::data to 5 bytes

2015-07-24 21:43:52 +02:00

keywords.txt

Integrate keywords.txt from pull #31

2015-06-26 15:15:45 -07:00

library.properties

Fix #37 by optimizing pulse read to use direct port access on AVR, stops checksum failures from missed signals.

2015-07-22 12:13:56 -07:00

README.txt

added mini readme

2011-06-22 16:12:33 -04:00

README.txt

This is an Arduino library for the DHT series of low cost temperature/humidity sensors. 

To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder DHT. Check that the DHT folder contains DHT.cpp and DHT.h. Place the DHT library folder your <arduinosketchfolder>/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.