16 KiB
Unity Configuration Guide
C Standards, Compilers and Microcontrollers
The embedded software world contains its challenges. Compilers support different revisions of the C Standard. They ignore requirements in places, sometimes to make the language more usable in some special regard. Sometimes it's to simplify their support. Sometimes it's due to specific quirks of the microcontroller they are targeting. Simulators add another dimension to this menagerie.
Unity is designed to run on almost anything that is targeted by a C compiler. It would be awesome if this could be done with zero configuration. While there are some targets that come close to this dream, it is sadly not universal. It is likely that you are going to need at least a couple of the configuration options described in this document.
All of Unity's configuration options are #defines. Most of these are simple
definitions. A couple are macros with arguments. They live inside the
unity_internals.h header file. We don't necessarily recommend opening that file
unless you really need to. That file is proof that a cross-platform library is
challenging to build. From a more positive perspective, it is also proof that a
great deal of complexity can be centralized primarily to one place in order to
provide a more consistent and simple experience elsewhere.
Using These Options
It doesn't matter if you're using a target-specific compiler and a simulator or a native compiler. In either case, you've got a couple choices for configuring these options:
- Because these options are specified via C defines, you can pass most of these options to your compiler through command line compiler flags. Even if you're using an embedded target that forces you to use their overbearing IDE for all configuration, there will be a place somewhere in your project to configure defines for your compiler.
- You can create a custom
unity_config.hconfiguration file (present in your toolchain's search paths). In this file, you will list definitions and macros specific to your target. All you must do is defineUNITY_INCLUDE_CONFIG_Hand Unity will rely onunity_config.hfor any further definitions it may need.
The Options
Integer Types
If you've been a C developer for long, you probably already know that C's
concept of an integer varies from target to target. The C Standard has rules
about the int matching the register size of the target microprocessor. It has
rules about the int and how its size relates to other integer types. An int
on one target might be 16 bits while on another target it might be 64. There are
more specific types in compilers compliant with C99 or later, but that's
certainly not every compiler you are likely to encounter. Therefore, Unity has a
number of features for helping to adjust itself to match your required integer
sizes. It starts off by trying to do it automatically.
UNITY_EXCLUDE_STDINT_H
The first thing that Unity does to guess your types is check stdint.h.
This file includes defines like UINT_MAX that Unity can make use of to
learn a lot about your system. It's possible you don't want it to do this
(um. why not?) or (more likely) it's possible that your system doesn't
support stdint.h. If that's the case, you're going to want to define this.
That way, Unity will know to skip the inclusion of this file and you won't
be left with a compiler error.
Example: #define UNITY_EXCLUDE_STDINT_H
UNITY_EXCLUDE_LIMITS_H
The second attempt to guess your types is to check limits.h. Some compilers
that don't support stdint.h could include limits.h instead. If you don't
want Unity to check this file either, define this to make it skip the inclusion.
Example: #define UNITY_EXCLUDE_LIMITS_H
UNITY_EXCLUDE_SIZEOF
The third and final attempt to guess your types is to use the sizeof()
operator. Even if the first two options don't work, this one covers most cases.
There is a rare compiler or two out there that doesn't support sizeof() in the
preprocessing stage, though. For these, you have the ability to disable this
feature as well.
Example: #define UNITY_EXCLUDE_SIZEOF
If you've disabled all of the automatic options above, you're going to have to do the configuration yourself. Don't worry. Even this isn't too bad... there are just a handful of defines that you are going to specify if you don't like the defaults.
UNITY_INT_WIDTH
Define this to be the number of bits an int takes up on your system. The
default, if not autodetected, is 32 bits.
Example: #define UNITY_INT_WIDTH 16
UNITY_LONG_WIDTH
Define this to be the number of bits a long takes up on your system. The
default, if not autodetected, is 32 bits. This is used to figure out what kind
of 64-bit support your system can handle. Does it need to specify a long or a
long long to get a 64-bit value. On 16-bit systems, this option is going to be
ignored.
Example: #define UNITY_LONG_WIDTH 16
UNITY_POINTER_WIDTH
Define this to be the number of bits a pointer takes up on your system. The default, if not autodetected, is 32-bits. If you're getting ugly compiler warnings about casting from pointers, this is the one to look at.
Example: #define UNITY_POINTER_WIDTH 64
UNITY_INCLUDE_64
Unity will automatically include 64-bit support if it auto-detects it, or if
your int, long, or pointer widths are greater than 32-bits. Define this to
enable 64-bit support if none of the other options already did it for you. There
can be a significant size and speed impact to enabling 64-bit support on small
targets, so don't define it if you don't need it.
Example: #define UNITY_INCLUDE_64
Floating Point Types
In the embedded world, it's not uncommon for targets to have no support for
floating point operations at all or to have support that is limited to only
single precision. We are able to guess integer sizes on the fly because integers
are always available in at least one size. Floating point, on the other hand, is
sometimes not available at all. Trying to include float.h on these platforms
would result in an error. This leaves manual configuration as the only option.
UNITY_INCLUDE_FLOAT
UNITY_EXCLUDE_FLOAT
UNITY_INCLUDE_DOUBLE
UNITY_EXCLUDE_DOUBLE
By default, Unity guesses that you will want single precision floating point support, but not double precision. It's easy to change either of these using the include and exclude options here. You may include neither, either, or both, as suits your needs. For features that are enabled, the following floating point options also become available.
Example:
//what manner of strange processor is this?
#define UNITY_EXCLUDE_FLOAT
#define UNITY_INCLUDE_DOUBLE
UNITY_FLOAT_VERBOSE
UNITY_DOUBLE_VERBOSE
Unity aims for as small of a footprint as possible and avoids most standard
library calls (some embedded platforms don't have a standard library!). Because
of this, its routines for printing integer values are minimalist and hand-coded.
To keep Unity universal, though, we chose to not develop our own floating
point print routines. Instead, the display of floating point values during a
failure are optional. By default, Unity will not print the actual results of
floating point assertion failure. So a failed assertion will produce a message
like "Values Not Within Delta". If you would like verbose failure messages for
floating point assertions, use these options to give more explicit failure
messages (e.g. "Expected 4.56 Was 4.68"). Note that this feature requires the
use of sprintf so might not be desirable in all cases.
Example: #define UNITY_DOUBLE_VERBOSE
UNITY_FLOAT_TYPE
If enabled, Unity assumes you want your FLOAT asserts to compare standard C
floats. If your compiler supports a specialty floating point type, you can
always override this behavior by using this definition.
Example: #define UNITY_FLOAT_TYPE float16_t
UNITY_DOUBLE_TYPE
If enabled, Unity assumes you want your DOUBLE asserts to compare standard C
doubles. If you would like to change this, you can specify something else by
using this option. For example, defining UNITY_DOUBLE_TYPE to long double
could enable gargantuan floating point types on your 64-bit processor instead of
the standard double.
Example: #define UNITY_DOUBLE_TYPE long double
UNITY_FLOAT_PRECISION
UNITY_DOUBLE_PRECISION
If you look up UNITY_ASSERT_EQUAL_FLOAT and UNITY_ASSERT_EQUAL_DOUBLE as
documented in the big daddy Unity Assertion Guide, you will learn that they are
not really asserting that two values are equal but rather that two values are
"close enough" to equal. "Close enough" is controlled by these precision
configuration options. If you are working with 32-bit floats and/or 64-bit
doubles (the normal on most processors), you should have no need to change these
options. They are both set to give you approximately 1 significant bit in either
direction. The float precision is 0.00001 while the double is 10-12.
For further details on how this works, see the appendix of the Unity Assertion
Guide.
Example: #define UNITY_FLOAT_PRECISION 0.001f
Toolset Customization
In addition to the options listed above, there are a number of other options which will come in handy to customize Unity's behavior for your specific toolchain. It is possible that you may not need to touch any of these... but certain platforms, particularly those running in simulators, may need to jump through extra hoops to operate properly. These macros will help in those situations.
UNITY_OUTPUT_CHAR(a)
UNITY_OUTPUT_FLUSH()
UNITY_OUTPUT_START()
UNITY_OUTPUT_COMPLETE()
By default, Unity prints its results to stdout as it runs. This works
perfectly fine in most situations where you are using a native compiler for
testing. It works on some simulators as well so long as they have stdout
routed back to the command line. There are times, however, where the simulator
will lack support for dumping results or you will want to route results
elsewhere for other reasons. In these cases, you should define the
UNITY_OUTPUT_CHAR macro. This macro accepts a single character at a time (as
an int, since this is the parameter type of the standard C putchar function
most commonly used). You may replace this with whatever function call you like.
Example:
Say you are forced to run your test suite on an embedded processor with no
stdout option. You decide to route your test result output to a custom serial
RS232_putc() function you wrote like thus:
#define UNITY_OUTPUT_CHAR(a) RS232_putc(a)
#define UNITY_OUTPUT_START() RS232_config(115200,1,8,0)
#define UNITY_OUTPUT_FLUSH() RS232_flush()
#define UNITY_OUTPUT_COMPLETE() RS232_close()
Note:
UNITY_OUTPUT_FLUSH() can be set to the standard out flush function simply by
specifying UNITY_USE_FLUSH_STDOUT. No other defines are required. If you
specify a custom flush function instead with UNITY_OUTPUT_FLUSH directly, it
will declare an instance of your function by default. If you want to disable
this behavior, add UNITY_OMIT_OUTPUT_FLUSH_HEADER_DECLARATION.
UNITY_SUPPORT_WEAK
For some targets, Unity can make the otherwise required setUp() and
tearDown() functions optional. This is a nice convenience for test writers
since setUp and tearDown don't often actually do anything. If you're using
gcc or clang, this option is automatically defined for you. Other compilers can
also support this behavior, if they support a C feature called weak functions. A
weak function is a function that is compiled into your executable unless a
non-weak version of the same function is defined elsewhere. If a non-weak
version is found, the weak version is ignored as if it never existed. If your
compiler supports this feature, you can let Unity know by defining
UNITY_SUPPORT_WEAK as the function attributes that would need to be applied to
identify a function as weak. If your compiler lacks support for weak functions,
you will always need to define setUp and tearDown functions (though they can
be and often will be just empty). The most common options for this feature are:
Example: #define UNITY_SUPPORT_WEAK weak #define UNITY_SUPPORT_WEAK attribute((weak))
UNITY_PTR_ATTRIBUTE
Some compilers require a custom attribute to be assigned to pointers, like
near or far. In these cases, you can give Unity a safe default for these by
defining this option with the attribute you would like.
Example: #define UNITY_PTR_ATTRIBUTE attribute((far)) #define UNITY_PTR_ATTRIBUTE near
Getting Into The Guts
There will be cases where the options above aren't quite going to get everything
perfect. They are likely sufficient for any situation where you are compiling
and executing your tests with a native toolchain (e.g. clang on Mac). These
options may even get you through the majority of cases encountered in working
with a target simulator run from your local command line. But especially if you
must run your test suite on your target hardware, your Unity configuration will
require special help. This special help will usually reside in one of two
places: the main() function or the RUN_TEST macro. Let's look at how these
work.
main()
Each test module is compiled and run on its own, separate from the other test
files in your project. Each test file, therefore, has a main function. This
main function will need to contain whatever code is necessary to initialize
your system to a workable state. This is particularly true for situations where
you must set up a memory map or initialize a communication channel for the
output of your test results.
A simple main function looks something like this:
int main(void) {
UNITY_BEGIN();
RUN_TEST(test_TheFirst);
RUN_TEST(test_TheSecond);
RUN_TEST(test_TheThird);
return UNITY_END();
}
You can see that our main function doesn't bother taking any arguments. For our
most barebones case, we'll never have arguments because we just run all the
tests each time. Instead, we start by calling UNITY_BEGIN. We run each test
(in whatever order we wish). Finally, we call UNITY_END, returning its return
value (which is the total number of failures).
It should be easy to see that you can add code before any test cases are run or after all the test cases have completed. This allows you to do any needed system-wide setup or teardown that might be required for your special circumstances.
RUN_TEST
The RUN_TEST macro is called with each test case function. Its job is to
perform whatever setup and teardown is necessary for executing a single test
case function. This includes catching failures, calling the test module's
setUp() and tearDown() functions, and calling UnityConcludeTest(). If
using CMock or test coverage, there will be additional stubs in use here. A
simple minimalist RUN_TEST macro looks something like this:
#define RUN_TEST(testfunc) \
UNITY_NEW_TEST(#testfunc) \
if (TEST_PROTECT()) { \
setUp(); \
testfunc(); \
} \
if (TEST_PROTECT() && (!TEST_IS_IGNORED)) \
tearDown(); \
UnityConcludeTest();
So that's quite a macro, huh? It gives you a glimpse of what kind of stuff Unity
has to deal with for every single test case. For each test case, we declare that
it is a new test. Then we run setUp and our test function. These are run
within a TEST_PROTECT block, the function of which is to handle failures that
occur during the test. Then, assuming our test is still running and hasn't been
ignored, we run tearDown. No matter what, our last step is to conclude this
test before moving on to the next.
Let's say you need to add a call to fsync to force all of your output data to
flush to a file after each test. You could easily insert this after your
UnityConcludeTest call. Maybe you want to write an xml tag before and after
each result set. Again, you could do this by adding lines to this macro. Updates
to this macro are for the occasions when you need an action before or after
every single test case throughout your entire suite of tests.
Happy Porting
The defines and macros in this guide should help you port Unity to just about any C target we can imagine. If you run into a snag or two, don't be afraid of asking for help on the forums. We love a good challenge!
Find The Latest of This And More at ThrowTheSwitch.org